[{"country_short": "CHN", "city": "Ji Ning", "description": "External Job\nTitle Production Manger\nBusiness Function Production\nEmployee category Regular\nAutoReqId 51464BR\nDivision Fluid Filtration Division\nExperience\nLevel 5-7 years\nTravel Required Up to 10 percent\nJob Description Jining FFD has an opening position:\n1,Participate in plant\u2019s SP;\n2,Organize production team to finish production on time according to plant\u2019s production plan;\n3,Organize production team to setup and improve internal process in order to improve management efficiency and productivity;\n4,Make annually training plan to improve operator\u2019s skill;\n5,Make annually equipment PM plan and monitor develop validity;\n6,Monitor safety\\PPE in workshop;\n7,Implement production department responsibility and work with other department closely to achieve plant\u2019s good results;\n8,Cooperate with relative department to use lean tools such as VSM/Pull to improve material and information flow;\n9,Setup lean monthly meeting with team member to monitor action plan;\n10,Other works assigned by supervisor.\nBasic Qualifications (Including Educational Requirements) Bachelor\u2019s or above degree in Mechanical or Welding Major is preferred.\nMore than 5 years relevant working experience.\nBe familiar with Lean tools, can implement the tools into practice\nGood coordinate and communication skills.\nFluent at both spoken and written English.\nRelocation benefit provided? No\nRegion Asia Pacific\nCountry China\nCity Ji Ning\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-05-22 18:37:18", "url": "http://find.eaton.jobs/xml/28863555/job", "country": "China", "company": "Eaton Corporation", "title": "Production Manger", "reqid": "51464BR", "state": null, "state_short": null, "location": "Ji Ning, CHN", "uid": 28863555}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle Wax Injector\nBusiness Function Production\nEmployee category Regular\nAutoReqId 52139BR\nDivision Fuel Systems Division\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a Wax Injector.\n\nThe Eaton Wax Injector is accountable for the manufacturing of wax components from aluminium tooling. Responsibilities will include assembling and dis-assembling mould tools and ensuring quality standards of producing components are upheld.\n\nKey responsibilities\n\n\u2022 To carry mould tooling from specific side racking areas\n\u2022 Inject wax using appropriate machinery and control procedures to company specific standards\n\u2022 Assemble and disassemble mould tools according to company processes and procedures\n\u2022 Quality check parts ready for onward processes to ensure they meet the customers standards and specifications\n\u2022 Maintain batch cycle times in accordance with set targets\n\u2022 Identify and report any defects in tooling and components which do not meet specific standards\n\u2022 Adopt and maintain EATON LEAN initiatives within the business and cell\n\nExperience Required:\n\n\u2022 Have proven track record of working on intricate parts within a team.\n\u2022 Ability to organize tooling within ranking system using job card routings\n\u2022 Ability to interpret measurements and standards set for tooling machinery and wax patterns\n\u2022 Have an aptitude for health and safety awareness\n\u2022 Understand written instructions and comply with company processes and procedures\n\u2022 Ideally candidate will have proven experience within and industry role working on intricate parts using complex tooling\n\u2022 Manufacturing background or assembly\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications required\n\n\u2022 Ideally hold GCSE in Maths or proven numerical skills\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-05-21 19:54:17", "url": "http://find.eaton.jobs/xml/28836164/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "Wax Injector", "reqid": "52139BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 28836164}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle Stator Assembler\nBusiness Function Production\nEmployee category Regular\nAutoReqId 52142BR\nDivision Fuel Systems Division\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a Stator Assembler.\n\nThe Stator Assembler willassemble parts in accordance with drawing and quality requirements.\n\nKey responsibilities\n\n\u2022 Assembly\n\u2022 Testing\n\u2022 Soldering (training available)\n\u2022 Check accuracy of parts using appropriate measuring tools\n\u2022 Take corrective action to rectify errors\n\u2022 Cover and adapt to work in different areas as required\n\u2022 Application of lean principles/tools, 5s, TPM, Error proofing etc\n\u2022 Assist in achieving and improving process times\n\nExperience Required:\n\n\u2022 Knowledge of basic shop floor measurement techniques\n\u2022 Knowledge of LEAN / 5S / Seven Wastes etc\n\u2022 Ability to read and interpret Engineering Drawings and Instructions\n\u2022 Training will be provided\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications required\n\n\u2022 GCSE\u2019s preferred\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-05-21 19:48:57", "url": "http://find.eaton.jobs/xml/28836067/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "Stator Assembler", "reqid": "52142BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 28836067}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle Stator Assembler\nAutoReqId 52142BR\nBusiness Function Production\nDivision Fuel Systems Division\nEmployee category Regular\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a Stator Assembler.\n\nThe Stator Assembler willassemble parts in accordance with drawing and quality requirements.\n\nKey responsibilities\n\n\u2022 Assembly\n\u2022 Testing\n\u2022 Soldering (training available)\n\u2022 Check accuracy of parts using appropriate measuring tools\n\u2022 Take corrective action to rectify errors\n\u2022 Cover and adapt to work in different areas as required\n\u2022 Application of lean principles/tools, 5s, TPM, Error proofing etc\n\u2022 Assist in achieving and improving process times\n\nExperience Required:\n\n\u2022 Knowledge of basic shop floor measurement techniques\n\u2022 Knowledge of LEAN / 5S / Seven Wastes etc\n\u2022 Ability to read and interpret Engineering Drawings and Instructions\n\u2022 Training will be provided\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications required\n\n\u2022 GCSE\u2019s preferred\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-05-21 18:11:48", "url": "http://find.eaton.jobs/xml/28833027/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "Stator Assembler", "reqid": "52142BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 28833027}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle Wax Injector\nAutoReqId 52139BR\nBusiness Function Production\nDivision Fuel Systems Division\nEmployee category Regular\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a Wax Injector.\n\nThe Eaton Wax Injector is accountable for the manufacturing of wax components from aluminium tooling. Responsibilities will include assembling and dis-assembling mould tools and ensuring quality standards of producing components are upheld.\n\nKey responsibilities\n\n\u2022 To carry mould tooling from specific side racking areas\n\u2022 Inject wax using appropriate machinery and control procedures to company specific standards\n\u2022 Assemble and disassemble mould tools according to company processes and procedures\n\u2022 Quality check parts ready for onward processes to ensure they meet the customers standards and specifications\n\u2022 Maintain batch cycle times in accordance with set targets\n\u2022 Identify and report any defects in tooling and components which do not meet specific standards\n\u2022 Adopt and maintain EATON LEAN initiatives within the business and cell\n\nExperience Required:\n\n\u2022 Have proven track record of working on intricate parts within a team.\n\u2022 Ability to organize tooling within ranking system using job card routings\n\u2022 Ability to interpret measurements and standards set for tooling machinery and wax patterns\n\u2022 Have an aptitude for health and safety awareness\n\u2022 Understand written instructions and comply with company processes and procedures\n\u2022 Ideally candidate will have proven experience within and industry role working on intricate parts using complex tooling\n\u2022 Manufacturing background or assembly\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications required\n\n\u2022 Ideally hold GCSE in Maths or proven numerical skills\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-05-21 18:11:25", "url": "http://find.eaton.jobs/xml/28833010/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "Wax Injector", "reqid": "52139BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 28833010}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Project Engineer\nAutoReqId 51155BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Sr. Project Engineer. This position will lead an engineering team performing conceptual design, development and qualification of hydraulic valves, actuators and reservoirs for various commercial and military applications, including nose wheel steering, landing gear control, general aircraft hydraulic systems. Successful candidates will be able to independently lead a major project from initial design conception through the design phases, up to and including qualification and transition to production. The position requires the use of six sigma tools to ensure project success and may involve use of some earned value tools.\n\nDuties and Responsibilities:\n\n1. Lead teams engaged in any or all of the activities below. Provide mentorship, technical advice, and oversight to component design engineers locally and at other Eaton or vendor sites, locally and globally.\n2. Estimate labor/material budgets for new and scope change proposals. Establish design-to-cost (DTC) models and track configurations to DTC compliance per company practices.\n3. Establish technical work breakdown structures and budget estimates in conjunction with Program Management and Engineering Resource Managers. Manage progress to engineering task plans and schedules through the project, including variance analysis of earned value metrics as appropriate.\n4. Develop appropriate allocations, and design margin strategy, of system requirements to component attributes including derived characteristics. Assist in review and refinement of system or component specifications. Develop and maintain specification compliance data throughout the product development life cycle.\n5. Lead component development by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other engineers. Apply engineering knowledge and 3D modeling skills to develop designs compliant with internal and external standard practices.\n6. Develop, execute, and manage a risk management plan including risk mitigation tasks. Solve technical problems with products and designs; drive teams to efficiently and effectively execute problem solving assignments.\n7. Lead the team in utilizing six sigma tools (especially design for six sigma) to ensure that critical to quality measures are defined and tracked through the design and validation process. Conduct reviews to ensure that design variability and process capability are understood and defined in design documentation.\n8. Prepare technical presentations for internal and external customers, including preliminary/critical design reviews and other reviews as required.\n9. Participate in and lead meetings with the customer and other engineers, distributing the results to the development team and coordinating actions as necessary. Ensure information flow within the local Eaton team, with other Eaton sites (locally and globally), and contractor teams as appropriate to facilitate work flow, efficiency and quality of work results delivered to the customer\n10. Prepare or approve SDRL documents, including analysis reports, certification reports etc.\n11. Participate in the component/system qualification process in conjunction with the Eaton and outside test laboratories.\n12. Perform other duties as assigned.\n\nPosition Criteria:\n\nAbility to understand system and customer specifications, layouts and functions, and the interfaces to other platform systems.\n\nFamiliarity with manufacturing and ability to work closely with manufacturing engineers to make use of process capability data in design.\n\nGood written, oral and presentation skills, leadership qualities and the ability to work well with customers and development team members.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\n- Bachelor of Science Degree in Engineering from an accredited institution is required.\n- Minimum 10 years of Mechanical Engineering experience in an Aerospace, Automotive, or Medical Device environment.\n- Minimum 5 years leading projects\n- Must be prequalified to work on defense projects, per the state department ITAR regulations (US Citizen, Green Card, or Political Asylee).\n\nPreferred Criteria:\n\n- 5 years experience with aircraft component development (experience with valves, landing gear, and hydraulic components highly desired) and 3-5 years experience with project management and work in a cross-functional product team (leadership experience in this environment desired).\n- Experience with CATIA/ProE, Matlab/Simulink, and stress analysis tools preferred.\n- Experience with tools used for requirements flow-down / traceability (e.g. DOORS) preferred.\n- Experience with earned values tools preferred\n- Experience with six sigma tools ( e.g. DFMEA, QFD, Crystal Ball simulation, etc.) preferred\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 10+ Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-17 18:12:28", "url": "http://find.eaton.jobs/xml/28762320/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Project Engineer", "reqid": "51155BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 28762320}, {"country_short": "CAN", "city": "Milton", "description": "External Job\nTitle Assembler-Electrical\nBusiness Function Production\nEmployee category Regular\nAutoReqId 51740BR\nDivision Electrical Sector\nExperience\nLevel 1-3 years\nTravel Required No Travel\nJob Description Eaton is a diversified power management company with more than 100 years of experience providing energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power. With 2011 sales of $16.0 billion, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control; hydraulics components, systems and services for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has approximately 73,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.\n\nWe are currently recruiting a Wireman in our Milton facility.\n\n\nResponsibilities\n\n\n* Review and interpret drawings.\n\n* Check parts picked/delivered to parts required.\n\n* Wire point to point and use harnesses as required on less complicated boards.\n\n* Communicate schematic issues/concerns/errors with Coordinator or Manager.\n\n* Work to CSA and UL code.\n\n* Maintain equipment and perform housekeeping duties as necessary using the principles of 5S.\n\n* Assist team in achieving plant and department goals.\n\n* Work to required operating procedures, bill of materials, manufacturing information, and instruction from Management or Engineering to established procedures.\n\n* Perform all job functions with adherence to Eaton\u2019s Philosophy and Values as well as the Safety and Environmental standards.\n\nBasic Qualifications (Including Educational Requirements) Education\n\n\n* High School Diploma required with continuing education at a college, trade or university level preferred.\n\n\nExperience\n\n\n* Minimum of two to three years in a manufacturing environment.\n\n* Minimum of two years control wiring experience required.\n\n* Working knowledge of the mechanical, electrical, and safety procedures of a manufacturing facility.\n\n* Ability to understand schematics and interpret wire routings.\n\n* Demonstrated experience of strong attention to detail with a high focus on quality.\n\n* Good problem solving, mathematical skills and troubleshooting ability.\n\n* Ability to read and interpret bill of materials, and engineering drawings.\n\n* Ability to effectively manage multiple projects including prioritization relating to quality and customer satisfaction.\n\n* Must be a self-starter, have excellent communication skills and thrive working in teams.\n\nRelocation benefit provided? No\nRegion North America - Canada\nCountry Canada\nProvince Ontario\nCity Milton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-05-15 19:46:45", "url": "http://find.eaton.jobs/xml/28707170/job", "country": "Canada", "company": "Eaton Corporation", "title": "Assembler-Electrical", "reqid": "51740BR", "state": "Ontario", "state_short": "ON", "location": "Milton, ON", "uid": 28707170}, {"country_short": "CAN", "city": null, "description": "External Job\nTitle Assembler-Electrical\nAutoReqId 51740BR\nBusiness Function Production\nDivision Electrical Sector\nEmployee category Regular\nExperience\nLevel 1-3 years\nTravel Required No Travel\nJob Description Eaton is a diversified power management company with more than 100 years of experience providing energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power. With 2011 sales of $16.0 billion, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control; hydraulics components, systems and services for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has approximately 73,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.\n\nWe are currently recruiting a Wireman in our Milton facility.\n\n\nResponsibilities\n\n\n* Review and interpret drawings.\n\n* Check parts picked/delivered to parts required.\n\n* Wire point to point and use harnesses as required on less complicated boards.\n\n* Communicate schematic issues/concerns/errors with Coordinator or Manager.\n\n* Work to CSA and UL code.\n\n* Maintain equipment and perform housekeeping duties as necessary using the principles of 5S.\n\n* Assist team in achieving plant and department goals.\n\n* Work to required operating procedures, bill of materials, manufacturing information, and instruction from Management or Engineering to established procedures.\n\n* Perform all job functions with adherence to Eaton\u2019s Philosophy and Values as well as the Safety and Environmental standards.\n\nBasic Qualifications (Including Educational Requirements) Education\n\n\n* High School Diploma required with continuing education at a college, trade or university level preferred.\n\n\nExperience\n\n\n* Minimum of two to three years in a manufacturing environment.\n\n* Minimum of two years control wiring experience required.\n\n* Working knowledge of the mechanical, electrical, and safety procedures of a manufacturing facility.\n\n* Ability to understand schematics and interpret wire routings.\n\n* Demonstrated experience of strong attention to detail with a high focus on quality.\n\n* Good problem solving, mathematical skills and troubleshooting ability.\n\n* Ability to read and interpret bill of materials, and engineering drawings.\n\n* Ability to effectively manage multiple projects including prioritization relating to quality and customer satisfaction.\n\n* Must be a self-starter, have excellent communication skills and thrive working in teams.\n\nRelocation benefit provided? No\nRegion North America - Canada\nCountry Canada\nCity Milton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-05-15 18:34:58", "url": "http://find.eaton.jobs/xml/28704336/job", "country": "Canada", "company": "Eaton Corporation", "title": "Assembler-Electrical", "reqid": "51740BR", "state": null, "state_short": null, "location": "Virtual, CAN", "uid": 28704336}, {"country_short": "USA", "city": "Charlotte", "description": "External Job\nTitle ECA - Production Technician\nAutoReqId 51884BR\nBusiness Function Production\nDivision North America Truck\nJob Description Eaton Corporation, a diversified industrial manufacturer, has openings for a full-time production technician at its Clutch assembly facility in Charlotte, North Carolina. This position is for first shift in the Electronic Clutch Actuator (ECA) assembly area with core hours of 6:00am to 2:30pm, Monday-Friday. Weekends and daily overtime may be required.\n\nAlthough the primary position is in support of ECA assembly, successful candidates must be flexible to cross-train in other areas of the business as necessary. Candidates for this position must be willing and able to fulfill the following key responsibilities of the Production Tech role:\n\nKey Responsibilities:\n\nA. Support safety initiatives by complying with safety policies and regulations, to include usage of specific personal protective equipment as required in work instructions or other guidance specific to your work area, and through participation in behavioral based safety observation programs.\n\nB. Comply with all Corporate and Local policies and guidelines\n\nC. Be diligent in watching for and reporting any variances in quality, safety, or other guidelines to your cell leader or member of management\n\nD. Responsible to perform lean activities and be involved in identifying process improvement through teams and systems (i.e. Value Stream Mapping, 5S, Standardized Work, TPM, Error Proofing, Visions, etc.)\n\nE. Properly complete all required production records such as pacing sheets, red tags for quality issues, etc.\n\nF. Participate in teaming activities (safety, quality, process improvement, community involvement, engagement teams,etc.)\n\nG. Complete daily tasks in compliance with standardized work\nBasic Qualifications (Including Educational Requirements) 1 \u2013 3 years experience in a manufacturing environment\n\nValid High School Diploma or GED required from an accredited institution\n\nAbility to work any shift as needed\n\nBasic computer skills required\n\nSolid interpersonal communication skills (oral and written)\n\nAble to follow written and verbal instructions\n\nExperience with electrical component assembly preferred\n\n1 \u2013 3 years general knowledge of motors, electricity / electronics & soldering\n\n\nOther Requirements:\n\nMust be able to lift up to 35 lbs on a regular basis from floor to waist. Periodic lifting of up to 20 lbs from waist to shoulder.\n\nRequires the dexterity to assemble small parts (good fine motor skills).\n\nRequires the ability to stand for up to 9 hours with scheduled breaks.\n\nMust be able to stand, twist, bend, squat and stoop.\n\nMust be able to read and follow work instructions in English.\n\nDepth and peripheral vision required\nRegion North America - US/Puerto Rico\nCountry United States\nState North Carolina\nCity Charlotte\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-11 20:25:52", "url": "http://find.eaton.jobs/xml/28640939/job", "country": "United States", "company": "Eaton Corporation", "title": "ECA - Production Technician", "reqid": "51884BR", "state": "North Carolina", "state_short": "NC", "location": "Charlotte, NC", "uid": 28640939}, {"country_short": "USA", "city": "Williamsburg", "description": "External Job\nTitle Production Associate-Plumbing/Pedestal\nAutoReqId 51763BR\nBusiness Function Production\nDivision Residential Products Division\nJob Description Eaton Corporation, Marina Power & Lighting in Williamsburg VA has an opening for a Production Associate-Plumbing/Pedestal -1st Shift\n\nThis position will receive work assignments from Supervisors, Production Coordinators, and/or internal customers. Responsibilities include, but are not limited to:\n\n1.   Perform repetitive plumbing and pedestal assembly operations.\n2.   Operate and adjust equipment following general instructions.\n3.   Perform routine preventative maintenance when required to ensure peak performance of all manufacturing equipment.\n4.   Make simple set-ups and perform routine, preventative maintenance.\n5. Will perform ongoing minor troubleshooting and maintenance of equipment.\n6. Will also move material as needed to complete responsibilities using material handling carts. Will need lifting capabilities - 75 lbs.; push/pull 100lbs.\n7. Exhibit a strong adherence to quality by continually seeking methods of improvement for all functions of the position. Ensure quality criteria are met by review of documents, consciences assembly and proper employment of quality verification checklist.\n8. Receive and carry out work assignments from management and internal customers so as to fulfill customer orders in a timely manner.\n9. Perform assigned function from oral / written instructions, drawings, travel documents, manufacturing information, hand drawn layout request. Closely follow established procedures for completing assigned function.\n10. Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards.\n11. Ensure all safety and industrial hygiene requirements are maintained.\n12. Work from manufacturing information such as Kanban cards, MI\u2019s, requisitions and oral or written instructions.\n13. Work with members of a team to effectively complete work assignment. Receive information from team members regarding customer needs and product requirements and utilize this information to perform one\u2019s function.\n14. Perform Lean Initiatives.\nBasic Qualifications (Including Educational Requirements) High school diploma or GED required.\n\nMinimum 1 year experience in an industrial manufacturing environment required.\n\nGood record of job performance, safety and attendance. Must be able to work the 1-shifts and/or weekends as needed. Must be able to work in a team environment. Ability to read and comprehend parts drawings and bills of materials. Specific knowledge of Lean processes and procedures related to manufacturing processes for electrical distribution equipment.\n\nPHYSICAL DEMANDS: While performing the duties of this job the employee is regularly required to stand; walk; stoop; squat; reach to or below shoulder level; lift; carry; push; pull; and use hands to handle and feel. The employee is frequently required to climb; and reach above shoulder level. The employee is regularly required to lift/carry up to 50 pounds. The employee is frequently required to push/pull up to 50 pounds. The employee is occasionally required to push/pull greater than 50 pounds. The vision requirements include far and close vision with depth perception. The employee is frequently required to use color discrimination. While performing the duties of this job the employee is frequently required to listen and regularly required to talk.\n\nPlease note: No relocation benefit is offered for this position. Must be within geographic location-30 mile radius to be considered.\nRegion North America - US/Puerto Rico\nCountry United States\nState Virginia\nCity Williamsburg\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-10 18:54:34", "url": "http://find.eaton.jobs/xml/28606079/job", "country": "United States", "company": "Eaton Corporation", "title": "Production Associate-Plumbing/Pedestal", "reqid": "51763BR", "state": "Virginia", "state_short": "VA", "location": "Williamsburg, VA", "uid": 28606079}, {"country_short": "USA", "city": "Charleston", "description": "External Job\nTitle CNC Deburr/Utility\nAutoReqId 51836BR\nBusiness Function Production\nDivision Hydraulics Systems Division\nJob Description Eaton Corporation is a diversified power management company with 2010 sales of $ 13.7 billion. Celebrating its 100th anniversary in 2011, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control, hydraulics components, systems and service for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has approximately 73,000 employees and sells products to customers in more than 150 countries. For more information visit www.eaton.com\n\n\nEaton - Aerospace- Charleston, SC currently has opportunities for 1st shift Deburrist.\n\nSUMMARY OF DUTIES: The fully trained CNC Deburrist will be able to demonstrate knowledge and ability to use MFG Pro, demonstrate knowledge and ability to properly choose and use various deburr tools, knives and equipment to correctly perform prescribed functions on drawing, demonstrate knowledge and ability to read and interpret complex engineering drawings, blueprints, customer specifications and internal drawings and procedures, demonstrate knowledge and ability to perform repetitive manual deburring task keeping parts in quality compliance and following manufacturing process steps and meet productivity standards, demonstrate knowledge and ability to properly use required equipment, i.e. speedheads, Wire brush and scotch bright wheels, bench grinder, harperizer, polishers, degreaser, washers, sand blaster, sonic cleaning, buffer, washer, tumbler, polisher, and the associated vacuum systems, demonstrate knowledge and ability to check finish and/or flatness on lapped parts using required tools (Tropel Flatmaster, Profilometer, etc.),  demonstrate knowledge and ability to set up and run the coining press and drill press machines, demonstrate knowledge and ability to properly deburr outside of required parts (tops of bores, O.D. edges, Kingsbury slots, break edge on oil holes and counter bores, etc, demonstrate ability to operate and understand function of Foredom and Dotco Tool, demonstrate knowledge and ability to visually inspect parts determining defects (i.e. machining operations, rust vs. heat-treat scale, etc.) and advise supervision of issues, demonstrate knowledge and ability to perform medium complexity deburring task keeping parts in quality compliance following manufacturing process steps and meet productivity standards, demonstrate knowledge and ability to properly deburr inside of parts (i.e. kidneys, undercuts, back of splines, c\u2019bores, break edges on oil holes, burrs in oil holes and flanges of shoes, bearings, piston and rods, etc.), demonstrates knowledge and ability operate Lapmaster Machine and Ball Polisher\n\nKEY RESPONSIBILITIES:\nProductivity per standards. Operate and/or Set Up all required deubrrist machinery. Check accuracy of all parts per QA requirements using appropriate measurement tools.\n\nPREFERRED QUALIFICATIONS: Additional experience in industrial machine operating\nBasic Qualifications (Including Educational Requirements) BASIC QUALIFICATION REQUIREMENTS:\nAccredited High School diploma or G.E.D.\n\nMinimum one year experience year experience in industrial manufacturing machine operating environment or two years Trade School in related manufacturing program with related measurement techniques - using appropriate measurement equipment, dial calipers, micrometer.\n\nMust be legally authorized to work in the U.S., per the State Department ITAR regulations.\n\nNo relocation benefit is offered for this position. Only candidates residing in the immediate geographic area (50 mile radius) will be considered.\nRegion North America - US/Puerto Rico\nCountry United States\nState South Carolina\nCity Charleston, SC\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-09 19:36:20", "url": "http://find.eaton.jobs/xml/28579031/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Deburr/Utility", "reqid": "51836BR", "state": "South Carolina", "state_short": "SC", "location": "Charleston, SC", "uid": 28579031}, {"country_short": "USA", "city": "Charleston", "description": "External Job\nTitle CNC Machinists\nAutoReqId 51837BR\nBusiness Function Production\nDivision Hydraulics Systems Division\nJob Description Eaton Corporation is a diversified power management company with 2010 sales of $ 13.7 billion. Celebrating its 100th anniversary in 2011, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control, hydraulics components, systems and service for industrial and mobiile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance,fuel economy and safety. Eaton has aproximately 73,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.\n\nEaton - Aerospace- Charleston, currently has opportunities for 1st shift CNC Set Up Machinist.\n\nKEY RESPONSIBILITIES:\nProductivity per standards. Operate and/or Set Up CNC Machines, Pre-Set and load tooling as appropriate into CNC machine. Check accuracy of first off and per QA requirements using appropriate measurement tools. Obtain & Maintain QA Certified Operator status. Ability to work with process plan, blueprints, and program in prescribed sequence, ability to read machine program codes, ability to properly place parts, casting or stock in machine securely and accurately, ability properly operate machine to perform prescribed functions on drawing, ability to read and interpret complex engineering drawings, blueprints, customer specifications and internal drawings and procedures, ability to understand Geometric Dimensioning and Toleranceing, ability to bring machine tool back to desired location and resume cycle if cycle has been interrupted.  Understands function of, proper usage and resetting of Emergency Stop Button, ability to operate and understand function of mode switch and function keys , understands proper use of Rapid Traverse and Feed Rate Override Buttons, the ability to determine and input proper wear and geometry offsets, ability to determine all tooling is free from breaks, chips and abnormal wear, ability to properly set tools in machine locations required for set-up, ability to perform part changeover including program retrieval and input, ability to use pre-setter arm or tool setter and comp tools.\nability to read machine programs, ability to calculate and input axis coordinates X, Y and Z, or use spindle probe to load offsets, ability to change out all tooling and to properly building mill tools, ability to calibrate pre-setter arm by resetting parameters or tool settler or spindle probe, ability to trouble shoot concentricity problems including tool run out, the ability to recognize and eliminate machine alarms, ability to trouble shoot and eliminate flatness problems, ability to reset machine after crash or bumping of spindles, ability to cross train operators.\nability use CMM information to correct output, knowledge and understanding of Statistical Process Control\nability to insure accuracy of all gages by use of proper set, ability to apply GD & T (Geometric Dimensioning and Tolerancing).\n\nPREFERRED QUALIFICATIONS: Additional experience in setting up and operating CNC machines, understanding and editing program code.\nBasic Qualifications (Including Educational Requirements) BASIC QUALIFICATION REQUIREMENTS:\nAccredited High School diploma or G.E.D.\n\nMinimum one year experience or two years Trade School in CNC machine operating including: machine shop measurement techniques and reading and interpreting engineering drawings and understanding Geometric Tolerancing.\n\nMust be legally authorized to work in the U.S, per the State Department ITAR regulations.\nRegion North America - US/Puerto Rico\nCountry United States\nState South Carolina\nCity Charleston, SC\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-09 19:35:39", "url": "http://find.eaton.jobs/xml/28578886/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Machinists", "reqid": "51837BR", "state": "South Carolina", "state_short": "SC", "location": "Charleston, SC", "uid": 28578886}, {"country_short": "USA", "city": "Charleston", "description": "External Job\nTitle CNC Machinists\nAutoReqId 51837BR\nDivision Hydraulics Systems Division\nBusiness Function Production\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation is a diversified power management company with 2010 sales of $ 13.7 billion. Celebrating its 100th anniversary in 2011, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control, hydraulics components, systems and service for industrial and mobiile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance,fuel economy and safety. Eaton has aproximately 73,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.\n\nEaton - Aerospace- Charleston, currently has opportunities for 1st shift CNC Set Up Machinist.\n\nKEY RESPONSIBILITIES:\nProductivity per standards. Operate and/or Set Up CNC Machines, Pre-Set and load tooling as appropriate into CNC machine. Check accuracy of first off and per QA requirements using appropriate measurement tools. Obtain & Maintain QA Certified Operator status. Ability to work with process plan, blueprints, and program in prescribed sequence, ability to read machine program codes, ability to properly place parts, casting or stock in machine securely and accurately, ability properly operate machine to perform prescribed functions on drawing, ability to read and interpret complex engineering drawings, blueprints, customer specifications and internal drawings and procedures, ability to understand Geometric Dimensioning and Toleranceing, ability to bring machine tool back to desired location and resume cycle if cycle has been interrupted.  Understands function of, proper usage and resetting of Emergency Stop Button, ability to operate and understand function of mode switch and function keys , understands proper use of Rapid Traverse and Feed Rate Override Buttons, the ability to determine and input proper wear and geometry offsets, ability to determine all tooling is free from breaks, chips and abnormal wear, ability to properly set tools in machine locations required for set-up, ability to perform part changeover including program retrieval and input, ability to use pre-setter arm or tool setter and comp tools.\nability to read machine programs, ability to calculate and input axis coordinates X, Y and Z, or use spindle probe to load offsets, ability to change out all tooling and to properly building mill tools, ability to calibrate pre-setter arm by resetting parameters or tool settler or spindle probe, ability to trouble shoot concentricity problems including tool run out, the ability to recognize and eliminate machine alarms, ability to trouble shoot and eliminate flatness problems, ability to reset machine after crash or bumping of spindles, ability to cross train operators.\nability use CMM information to correct output, knowledge and understanding of Statistical Process Control\nability to insure accuracy of all gages by use of proper set, ability to apply GD & T (Geometric Dimensioning and Tolerancing).\n\nPREFERRED QUALIFICATIONS: Additional experience in setting up and operating CNC machines, understanding and editing program code.\nBasic Qualifications (Including Educational Requirements) BASIC QUALIFICATION REQUIREMENTS:\nAccredited High School diploma or G.E.D.\n\nMinimum one year experience or two years Trade School in CNC machine operating including: machine shop measurement techniques and reading and interpreting engineering drawings and understanding Geometric Tolerancing.\n\nMust be legally authorized to work in the U.S, per the State Department ITAR regulations.\nRelocation benefit provided? No\nCity Charleston, SC\nState South Carolina", "date_new": "2012-05-09 18:11:50", "url": "http://find.eaton.jobs/xml/28574649/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Machinists", "reqid": "51837BR", "state": "South Carolina", "state_short": "SC", "location": "Charleston, SC", "uid": 28574649}, {"country_short": "USA", "city": "Charleston", "description": "External Job\nTitle CNC Deburr/Utility\nAutoReqId 51836BR\nDivision Hydraulics Systems Division\nBusiness Function Production\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation is a diversified power management company with 2010 sales of $ 13.7 billion. Celebrating its 100th anniversary in 2011, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control, hydraulics components, systems and service for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has approximately 73,000 employees and sells products to customers in more than 150 countries. For more information visit www.eaton.com\n\n\nEaton - Aerospace- Charleston, SC currently has opportunities for 1st shift Deburrist.\n\nSUMMARY OF DUTIES: The fully trained CNC Deburrist will be able to demonstrate knowledge and ability to use MFG Pro, demonstrate knowledge and ability to properly choose and use various deburr tools, knives and equipment to correctly perform prescribed functions on drawing, demonstrate knowledge and ability to read and interpret complex engineering drawings, blueprints, customer specifications and internal drawings and procedures, demonstrate knowledge and ability to perform repetitive manual deburring task keeping parts in quality compliance and following manufacturing process steps and meet productivity standards, demonstrate knowledge and ability to properly use required equipment, i.e. speedheads, Wire brush and scotch bright wheels, bench grinder, harperizer, polishers, degreaser, washers, sand blaster, sonic cleaning, buffer, washer, tumbler, polisher, and the associated vacuum systems, demonstrate knowledge and ability to check finish and/or flatness on lapped parts using required tools (Tropel Flatmaster, Profilometer, etc.),  demonstrate knowledge and ability to set up and run the coining press and drill press machines, demonstrate knowledge and ability to properly deburr outside of required parts (tops of bores, O.D. edges, Kingsbury slots, break edge on oil holes and counter bores, etc, demonstrate ability to operate and understand function of Foredom and Dotco Tool, demonstrate knowledge and ability to visually inspect parts determining defects (i.e. machining operations, rust vs. heat-treat scale, etc.) and advise supervision of issues, demonstrate knowledge and ability to perform medium complexity deburring task keeping parts in quality compliance following manufacturing process steps and meet productivity standards, demonstrate knowledge and ability to properly deburr inside of parts (i.e. kidneys, undercuts, back of splines, c\u2019bores, break edges on oil holes, burrs in oil holes and flanges of shoes, bearings, piston and rods, etc.), demonstrates knowledge and ability operate Lapmaster Machine and Ball Polisher\n\nKEY RESPONSIBILITIES:\nProductivity per standards. Operate and/or Set Up all required deubrrist machinery. Check accuracy of all parts per QA requirements using appropriate measurement tools.\n\nPREFERRED QUALIFICATIONS: Additional experience in industrial machine operating\nBasic Qualifications (Including Educational Requirements) BASIC QUALIFICATION REQUIREMENTS:\nAccredited High School diploma or G.E.D.\n\nMinimum one year experience year experience in industrial manufacturing machine operating environment or two years Trade School in related manufacturing program with related measurement techniques - using appropriate measurement equipment, dial calipers, micrometer.\n\nMust be legally authorized to work in the U.S., per the State Department ITAR regulations.\n\nNo relocation benefit is offered for this position. Only candidates residing in the immediate geographic area (50 mile radius) will be considered.\nRelocation benefit provided? No\nCity Charleston, SC\nState South Carolina", "date_new": "2012-05-09 18:11:45", "url": "http://find.eaton.jobs/xml/28574647/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Deburr/Utility", "reqid": "51836BR", "state": "South Carolina", "state_short": "SC", "location": "Charleston, SC", "uid": 28574647}, {"country_short": "USA", "city": "Horseheads", "description": "External Job\nTitle Machinist\nAutoReqId 51637BR\nBusiness Function Production\nDivision Electrical Components Operations\nJob Description Perform a variety of setup, operation, inspection and preventative maintenance functions, on all machinery in Parts Manufacturing and Contact Machining. Continually strive for cost effective machining practices, such as eliminating scrap parts and set up time reduction. Receive all oral and/or written information from area supervisor, engineer or programmer and perform needed operations per instructions. Set up, adjust and maintain setup on all production machinery. Set up and operate production or support machinery necessary to modify parts per appropriate specifications. Monitor progress of work throughout departments to assure compliance with specifications. Develop fixtures, clamping devices, and non-standard machine tooling when necessary. Maintain necessary production and inventory records. Perform required cleanup tasks to maintain a clean and orderly work environment. Follow established safety procedures. Perform specified preventative maintenance as required.\nBasic Qualifications (Including Educational Requirements) Must have 2 years CNC machining experience in making off-sets to run a quality part.\n\nMust be a high school graduate or GED equivalent.\n\nMust live within 50 miles of the Horseheads, NY facility.\n\nMust be legally authorized to work in the United States without sponsorship.\n\nPreferred Qualifications\nUnderstanding CNC programs (G-Code).\n\nMust know how to read blueprints, measuring instruments like micrometers, calipers and functional gauging.\n\nCertificate in CNC operation with hands on experience with setup on CNC lathes and mills.\nRegion North America - US/Puerto Rico\nCountry United States\nState New York\nCity Horseheads\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-04 20:10:07", "url": "http://find.eaton.jobs/xml/28445282/job", "country": "United States", "company": "Eaton Corporation", "title": "Machinist", "reqid": "51637BR", "state": "New York", "state_short": "NY", "location": "Horseheads, NY", "uid": 28445282}, {"country_short": "USA", "city": "Warwick", "description": "External Job\nTitle Team Leader - Manufacturing\nAutoReqId 51280BR\nDivision Conveyance Systems Division\nBusiness Function Manufacturing\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nJob Description The Eaton Aerospace facility in Warwick, RI has an exciting opportunity for a High Performance Work Team Leader for Manufacturing.\n\nThis position is responsible for leadership of a cross-functional production team, and overseeing all activities associated with manufacturing and production of deliverable product to meet customer expectations. The leader monitors and manages hourly and salaried resources in the assignment of work responsibilities, development, and alignment of resources to load. This position drives continuous improvement in production, quality, and safety while utilizing the framework of the Eaton Business System (EBS) and the Lean Management System.\n\nEssential functions include:\n\nChampion a Safety Culture through use of MESH tools, safety best practices, and empowering employees to take responsibility for their own safety as well as everyone they work with\n\nLead areas of responsibility in the use of EBS practices, including Eaton Lean, Safety, Quality, and Product Development tools. Lead routine BOS/BSC reviews with focus on performance of the entire value stream. Keep focus on meeting customer needs, both internal and external (Customer Centric Focus / KBKC)\n\nOwnership of key business metrics for areas of responsibility. Utilize the BOS process to track and analyze key operational metrics and implement actions to improve operational performance. Direct day-to-day activities in production areas, including manpower movement, job assignments, time/attendance/vacation data\n\nLead cross-functional Continuous Improvement Teams for areas of responsibility, championing teamwork and problem-solving to continuously improve operational performance. Manage priorities of shared functional resources to achieve business needs\n\nForecast labor hours, schedule overtime, and execute to labor plan\n\nProvide vision and strategy for team, and be a positive role model by leading through example\n\nEstablish and maintain a positive, engaged employee team sentiment through application of Eaton\u2019s Values, Ethics, and Philosophies and empowering employees to make decisions, innovate, and work in a continuous learning environment. Enable success of employees by providing resources and removing barriers\n\nTrain and develop hourly team members, as well as providing coaching and oversight to dotted-line functional team members. Clearly define and communicate expectations, providing positive reinforcement when met and providing coaching and counseling as necessary when not met\n\nChampion a culture change through the framework of High Performance Work Teams (HPWTs). Empower employees \u2013 drive decision making down through organization.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n-Bachelor\u2019s degree from an accredited institution is required.\n-Minimum 5 years of experience in Operations/Manufacturing or a graduate of an Operations Leadership Development Program is required.\n-Minimum 1 year of experience leading a team is required.\n-Must be prequalified to work on defense projects, per the state department ITAR regulations.\n\nPosition Criteria:\nUnderstands and practices Front Line Excellence principles (FLEX)\nKnowledge of basic manufacturing processes (safety, environmental, assembly, gauging, AS9100)\nKnowledge of Lean Manufacturing and Continuous Improvement\nProblem-Solving skills (8D, A3, or equivalent)\nStrong communication and interpersonal skills\nStrong leadership, coaching, and influence management skills\nMust be able to establish priorities and balance multiple objectives\nComputer Skills: Demonstrated proficiency in Microsoft Office applications, Familiarity with MRP systems\nRelocation benefit provided? Yes (US/PR Only)\nCity Warwick, RI\nState Rhode Island", "date_new": "2012-04-26 19:12:25", "url": "http://find.eaton.jobs/xml/28205625/job", "country": "United States", "company": "Eaton Corporation", "title": "Team Leader - Manufacturing", "reqid": "51280BR", "state": "Rhode Island", "state_short": "RI", "location": "Warwick, RI", "uid": 28205625}, {"country_short": "USA", "city": "Warwick", "description": "External Job\nTitle Team Leader - Manufacturing\nAutoReqId 51280BR\nBusiness Function Manufacturing\nDivision Conveyance Systems Division\nJob Description The Eaton Aerospace facility in Warwick, RI has an exciting opportunity for a High Performance Work Team Leader for Manufacturing.\n\nThis position is responsible for leadership of a cross-functional production team, and overseeing all activities associated with manufacturing and production of deliverable product to meet customer expectations. The leader monitors and manages hourly and salaried resources in the assignment of work responsibilities, development, and alignment of resources to load. This position drives continuous improvement in production, quality, and safety while utilizing the framework of the Eaton Business System (EBS) and the Lean Management System.\n\nEssential functions include:\n\nChampion a Safety Culture through use of MESH tools, safety best practices, and empowering employees to take responsibility for their own safety as well as everyone they work with\n\nLead areas of responsibility in the use of EBS practices, including Eaton Lean, Safety, Quality, and Product Development tools. Lead routine BOS/BSC reviews with focus on performance of the entire value stream. Keep focus on meeting customer needs, both internal and external (Customer Centric Focus / KBKC)\n\nOwnership of key business metrics for areas of responsibility. Utilize the BOS process to track and analyze key operational metrics and implement actions to improve operational performance. Direct day-to-day activities in production areas, including manpower movement, job assignments, time/attendance/vacation data\n\nLead cross-functional Continuous Improvement Teams for areas of responsibility, championing teamwork and problem-solving to continuously improve operational performance. Manage priorities of shared functional resources to achieve business needs\n\nForecast labor hours, schedule overtime, and execute to labor plan\n\nProvide vision and strategy for team, and be a positive role model by leading through example\n\nEstablish and maintain a positive, engaged employee team sentiment through application of Eaton\u2019s Values, Ethics, and Philosophies and empowering employees to make decisions, innovate, and work in a continuous learning environment. Enable success of employees by providing resources and removing barriers\n\nTrain and develop hourly team members, as well as providing coaching and oversight to dotted-line functional team members. Clearly define and communicate expectations, providing positive reinforcement when met and providing coaching and counseling as necessary when not met\n\nChampion a culture change through the framework of High Performance Work Teams (HPWTs). Empower employees \u2013 drive decision making down through organization.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n-Bachelor\u2019s degree from an accredited institution is required.\n-Minimum 5 years of experience in Operations/Manufacturing or a graduate of an Operations Leadership Development Program is required.\n-Minimum 1 year of experience leading a team is required.\n-Must be prequalified to work on defense projects, per the state department ITAR regulations.\n\nPosition Criteria:\nUnderstands and practices Front Line Excellence principles (FLEX)\nKnowledge of basic manufacturing processes (safety, environmental, assembly, gauging, AS9100)\nKnowledge of Lean Manufacturing and Continuous Improvement\nProblem-Solving skills (8D, A3, or equivalent)\nStrong communication and interpersonal skills\nStrong leadership, coaching, and influence management skills\nMust be able to establish priorities and balance multiple objectives\nComputer Skills: Demonstrated proficiency in Microsoft Office applications, Familiarity with MRP systems\nRegion North America - US/Puerto Rico\nCountry United States\nState Rhode Island\nCity Warwick, RI\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-04-26 19:05:32", "url": "http://find.eaton.jobs/xml/28205383/job", "country": "United States", "company": "Eaton Corporation", "title": "Team Leader - Manufacturing", "reqid": "51280BR", "state": "Rhode Island", "state_short": "RI", "location": "Warwick, RI", "uid": 28205383}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle CNC Machinist\nAutoReqId 49780BR\nBusiness Function Production\nDivision Fuel Systems Division\nEmployee category Regular\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a CNC Machinist.\n\n\nThe CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets.\n\nKey responsibilities\n\n\u2022 Set CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer\n\u2022 Load tooling as appropriate into CNC machine\n\u2022 Check accuracy of first off\n\u2022 Check accuracy of parts using appropriate measurement tools\n\u2022 Take corrective action to rectify errors by offset adjustment on CNC machine\n\u2022 Pass parts onto inspection for A stamp approval\n\u2022 Undertake inspection process of other team members work\n\u2022 Work on own initiatives and resolve any issues or problems to company specific procedures\n\u2022 Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events\n\u2022 Ability to be flexible and adaptable working on different machines and assisting colleagues as required.\n\u2022 Flexible in work patterns to meet business needs\n\nExperience Required:\n\n\u2022 Previous experience in setting and operating CNC Turning together with Milling and Mill/Turning Machines (this is advantageous to have both qualities)\n\u2022 Conversant with Machine Shop Measurement Techniques\u2013 using appropriate measurement equipment e.g. vernier, micrometer use of thread checking equipment\n\u2022 Experience of Programming and Operating Co-ordinate Measuring Machines (CMM's) an advantage\n\u2022 Ability to Read and interpret Engineering Drawings, with a practical working understanding of Geometric Tolerancing (use of geometric symbols)\n\u2022 Good level of computer literacy\n\u2022 Experience of Inspection of parts to comply with industry and company standards\n\u2022 Experience of Fanuc and Heidenhein operating systems an advantage\n\u2022 Worked on HICELL machines desirable\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications required\n\n\u2022 Apprentice Qualified or similarly experienced Machinist with CNC Turning and/or Milling experience\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-04-24 19:07:11", "url": "http://find.eaton.jobs/xml/28145633/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "CNC Machinist", "reqid": "49780BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 28145633}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle Actuator Assembler\nAutoReqId 49778BR\nBusiness Function Production\nDivision Fuel Systems Division\nEmployee category Regular\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for an:\n\nThe Actuator Assembler will assemble actuators in line with the company procedure\n\nKey responsibilities\n\n\u2022 Preparation of parts for kit\n\u2022 Assemble of gear parts\n\u2022 Laying in of wires\n\u2022 Soldering of wires\n\u2022 Soldering and attaching connector.\n\u2022 Soldering and connection of Motor\n\u2022 Setting of switches\n\u2022 Vibro etching of lids\n\u2022 Electrical testing of Actuator\n\u2022 Varnishing of lids and screws.\n\u2022 Read and understand Engineering drawings and specifications.\n\u2022 Fully committed to Eaton lean system\n\u2022 Responsible for making yourself aware of H & S in the area.\n\nExperience required/ preferred\n\n\u2022 Some previous assembly experience (although full training will be given)\n\u2022 Soldering experience\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualification required\n\n\u2022 Dexterous\n\u2022 Attention to detail\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-04-24 19:05:10", "url": "http://find.eaton.jobs/xml/28145561/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "Actuator Assembler", "reqid": "49778BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 28145561}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle Actuator Assembler\nBusiness Function Production\nEmployee category Regular\nAutoReqId 49778BR\nDivision Fuel Systems Division\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for an:\n\nThe Actuator Assembler will assemble actuators in line with the company procedure\n\nKey responsibilities\n\n\u2022 Preparation of parts for kit\n\u2022 Assemble of gear parts\n\u2022 Laying in of wires\n\u2022 Soldering of wires\n\u2022 Soldering and attaching connector.\n\u2022 Soldering and connection of Motor\n\u2022 Setting of switches\n\u2022 Vibro etching of lids\n\u2022 Electrical testing of Actuator\n\u2022 Varnishing of lids and screws.\n\u2022 Read and understand Engineering drawings and specifications.\n\u2022 Fully committed to Eaton lean system\n\u2022 Responsible for making yourself aware of H & S in the area.\n\nExperience required/ preferred\n\n\u2022 Some previous assembly experience (although full training will be given)\n\u2022 Soldering experience\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualification required\n\n\u2022 Dexterous\n\u2022 Attention to detail\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-04-24 18:43:32", "url": "http://find.eaton.jobs/xml/28143943/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "Actuator Assembler", "reqid": "49778BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 28143943}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle CNC Machinist\nBusiness Function Production\nEmployee category Regular\nAutoReqId 49780BR\nDivision Fuel Systems Division\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a CNC Machinist.\n\n\nThe CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets.\n\nKey responsibilities\n\n\u2022 Set CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer\n\u2022 Load tooling as appropriate into CNC machine\n\u2022 Check accuracy of first off\n\u2022 Check accuracy of parts using appropriate measurement tools\n\u2022 Take corrective action to rectify errors by offset adjustment on CNC machine\n\u2022 Pass parts onto inspection for A stamp approval\n\u2022 Undertake inspection process of other team members work\n\u2022 Work on own initiatives and resolve any issues or problems to company specific procedures\n\u2022 Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events\n\u2022 Ability to be flexible and adaptable working on different machines and assisting colleagues as required.\n\u2022 Flexible in work patterns to meet business needs\n\nExperience Required:\n\n\u2022 Previous experience in setting and operating CNC Turning together with Milling and Mill/Turning Machines (this is advantageous to have both qualities)\n\u2022 Conversant with Machine Shop Measurement Techniques\u2013 using appropriate measurement equipment e.g. vernier, micrometer use of thread checking equipment\n\u2022 Experience of Programming and Operating Co-ordinate Measuring Machines (CMM's) an advantage\n\u2022 Ability to Read and interpret Engineering Drawings, with a practical working understanding of Geometric Tolerancing (use of geometric symbols)\n\u2022 Good level of computer literacy\n\u2022 Experience of Inspection of parts to comply with industry and company standards\n\u2022 Experience of Fanuc and Heidenhein operating systems an advantage\n\u2022 Worked on HICELL machines desirable\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications required\n\n\u2022 Apprentice Qualified or similarly experienced Machinist with CNC Turning and/or Milling experience\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-04-24 18:40:04", "url": "http://find.eaton.jobs/xml/28143823/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "CNC Machinist", "reqid": "49780BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 28143823}, {"country_short": "USA", "city": "Williamsburg", "description": "External Job\nTitle Production Associate\nAutoReqId 51070BR\nBusiness Function Production\nDivision Residential Products Division\nJob Description Eaton Corporation, Marina Power & Lighting in Williamsburg, VA has an opening for a Production Associate \u2013 Electrical Distribution Assembly,1st Shift.\n\nThis position will receive work assignments from Supervisors, Production Coordinators, and/or internal customers.\n\nResponsibilities include, but are not limited to:\n1. Correctly select and install, in accordance to drawings/diagrams/blueprints, various components/devices.\n2. Exhibit a strong adherence to quality by continually seeking methods of improvement for all functions of the position. Ensure quality criteria are met by review of documents, consciences assembly and proper employment of quality verification checklist.\n3. Receive and carry out work assignments from management and internal customers so as to fulfill customer orders in a timely manner. Perform assigned function from oral / written instructions, drawings, travel documents, manufacturing information, hand drawn layout request. Closely follow established procedures for completing assigned function.\n4. Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards.\n5. Ensure all safety and industrial hygiene requirements are maintained.\n6. Work from manufacturing information such as Kanban cards, MI\u2019s, requisitions and oral or written instructions.\n7. Work with members of a team to effectively complete work assignment. Receive information from team members regarding customer needs and product requirements and utilize this information to perform one\u2019s function.\n8. Perform Lean Initiatives.\n9. Perform routine preventative maintenance when required to ensure peak performance of all manufacturing equipment.\n10. Perform special assignments and/or projects as assigned.\n11. Perform Flexing throughout electrical assembly operations as production volumes shift and customer demands require.\n11. Exhibit strong analytical and problem solving skills so as to resolve any obstacles or delays that may occur in the production process.\nBasic Qualifications (Including Educational Requirements) High school diploma or GED required.\n\nMinimum 1 year experience in an industrial manufacturing environment with mechanical and/or electrical experience required.\n\nGood record of job performance, safety and attendance. Must be able to work the 1-shifts and/or weekends as needed. Must be able to work in a team environment. Ability to read and comprehend parts drawings and bills of materials. Specific knowledge of Lean processes and procedures related to manufacturing processes for electrical distribution equipment.\n\nPHYSICAL DEMANDS: While performing the duties of this job the employee is regularly required to stand; walk; stoop; squat; reach to or below shoulder level; lift; carry; push; pull; and use hands to handle and feel. The employee is frequently required to climb; and reach above shoulder level. The employee is regularly required to lift/carry up to 50 pounds. The employee is frequently required to push/pull up to 50 pounds. The employee is occasionally required to push/pull greater than 50 pounds. The vision requirements include far and close vision with depth perception. The employee is frequently required to use color discrimination. While performing the duties of this job the employee is frequently required to listen and regularly required to talk.\n\nPlease note: No relocation benefit is offered for this position\nRegion North America - US/Puerto Rico\nCountry United States\nState Virginia\nCity Williamsburg\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-23 20:25:44", "url": "http://find.eaton.jobs/xml/28080730/job", "country": "United States", "company": "Eaton Corporation", "title": "Production Associate", "reqid": "51070BR", "state": "Virginia", "state_short": "VA", "location": "Williamsburg, VA", "uid": 28080730}, {"country_short": "USA", "city": "Williamsburg", "description": "External Job\nTitle Production Associate-Painter\nAutoReqId 51055BR\nBusiness Function Production\nDivision Residential Products Division\nJob Description Eaton Corporation, Marina Power & Lighting in Williamsburg VA has an opening for a Production Associate\u2013Powder Coating/Painter,1st Shift.\n\nThis position will receive work assignments from Supervisors, Production Coordinators, and/or internal customers.\n\nResponsibilities include, but are not limited to:\n\n1.Will perform industrial powder coat painting processes on production materials in accordance to specifications.\n2.Will prepare material for painting operations by mixing coatings in proper quantities and viscosities; unpackages, cleans, moves, and jigs product as necessary.\n3.Will apply specified coating to products. Utilizes print specification and appropriate measuring tools to perform work accurately and assure quality.\n4.Will thoroughly clean all painting equipment as required to maintain in proper working order.\n5.Will perform ongoing minor troubleshooting and maintenance of equipment.\n6.Will also move material as needed to complete responsibilities using material handling carts. Will need lifting capabilities - 75 lbs.; push/pull 100lbs.\n7.Exhibit a strong adherence to quality by continually seeking methods of improvement for all functions of the position. Ensure quality criteria are met by review of documents, consciences assembly and proper employment of quality verification checklist.\n8.Receive and carry out work assignments from management and internal customers so as to fulfill customer orders in a timely manner.\n9.Perform assigned function from oral / written instructions, drawings, travel documents, manufacturing information, hand drawn layout request. Closely follow established procedures for completing assigned function.\n10.Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards.\n11.Ensure all safety and industrial hygiene requirements are maintained.\n12.Work from manufacturing information such as Kanban cards, MI\u2019s, requisitions and oral or written instructions.\n13.Work with members of a team to effectively complete work assignment. Receive information from team members regarding customer needs and product requirements and utilize this information to perform one\u2019s function.\n14.Perform Lean Initiatives.\n15.Perform routine preventative maintenance when required to ensure peak performance of all manufacturing equipment.\n16.Perform special assignments and/or projects as assigned.\n17.Perform flexible assignments as required by the operation as volumes shift.\n18.Exhibit strong analytical and problem solving skills so as to resolve any obstacles or delays that may occur in the production process.\nBasic Qualifications (Including Educational Requirements) High school diploma or GED required.\n\nMinimum 1 year experience in an industrial manufacturing environment using Industrial powder paint systems utilizing a paint air gun with textured paints.\n\nPHYSICAL DEMANDS: While performing the duties of this job the employee is regularly required to stand; walk; stoop; squat; reach to or below shoulder level; lift; carry; push; pull; and use hands to handle and feel. The employee is frequently required to climb; and reach above shoulder level. The employee is regularly required to lift/carry up to 50 pounds. The employee is frequently required to push/pull up to 50 pounds. The employee is occasionally required to push/pull greater than 50 pounds. The vision requirements include far and close vision with depth perception. The employee is frequently required to use color discrimination. While performing the duties of this job the employee is frequently required to listen and regularly required to talk.\n\nPlease note: No relocation benefit is offered for this position. Must be within 30 mile radius of the location.\nRegion North America - US/Puerto Rico\nCountry United States\nState Virginia\nCity Williamsburg\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-23 20:24:15", "url": "http://find.eaton.jobs/xml/28080680/job", "country": "United States", "company": "Eaton Corporation", "title": "Production Associate-Painter", "reqid": "51055BR", "state": "Virginia", "state_short": "VA", "location": "Williamsburg, VA", "uid": 28080680}, {"country_short": "USA", "city": "Shawnee", "description": "External Job\nTitle Assembly Cell Technician\nAutoReqId 51311BR\nBusiness Function Production\nDivision Hydraulics Division\nJob Description To properly and safely assemble and/or test hydraulic components using gauging and other quality audits.\n\nCommunicate with peers, area supervisor, and area engineer to ensure a quality product and internal/external Customer satisfaction.*\nPerform scrap and time card entries at the end of each shift.\nRead and use routing sheets, ATS specifications, and assembly/test instructions and booklets to properly assemble and test hydraulic motors. Use routing sheets, operating instructions, and surface appearance templates.\nProperly select and assemble a variety of parts involving the pressing of bearings, fitting and alignment of shafts, seating seals, spacers, and retainers.*\nVisually inspect parts for defects and adjust/ align parts for proper fit as needed.*\nPerform supportive maintenance duties such as, but not limited to, Bearing Press oil and filter checks.\nProperly use and maintain all gauging and assembly equipment. *\nMove materials, as necessary, using forklift or other material-handling devices.\nPerform cell housekeeping duties on each shift along with provisional standards meeting 5-S requirements.\nPerform procedures necessary to ensure compliance with the Eaton Safety Process and ensure the personal safety of the incumbent including eye safety, hearing conservation, machine safety guards, ergonomic movement, lock out/tag out, MSDS procedures, and OHSA regulations. *\nAssist in maintaining an atmosphere of continuous improvement and team efforts for accomplishing departmental and plant goals. *\nPerform other related duties as assigned by supervisor.\nMeet standards as communicated by supervisor.\nTest Stand Operation: (in addition to the above duties, the function of test stand operation is responsible for the items listed below)*\nSelect and obtain proper fixtures for performance tests on a variety of hydraulic products.\nInstall units onto fixtures and select and key in prescribed programs to conduct performance tests (PSI, V.E./M.E, etc) on manual and computer numerical controlled test stands.\nObserve and record instrument readings and any performance failures completely and accurately.\nEnsure each motor is labeled/packaged completely with appropriate packing material.\nMaintain all fluid levels and restock all boxing stations at the end of each shift.\nEnsure the quality of the products by verifying components and observe for leakage where applicable.\n*Denotes essential function of the position.\nBasic Qualifications (Including Educational Requirements) A high school diploma or G.E.D.\nOne of the following:\nOne year of manufacturing assembly or repair experience in similar production environment.\nVocational School training, which includes comparable experience.\nDemonstrate basic mechanical aptitude and understanding of assembly terminology.\nDemonstrate basic computer data entry skills.\nAbility to read, understand and effectively apply information contained in all applicable documents such as operating instructions, dimensional sheets and/or blueprints (including geometric dimensioning and tolerancing).\nPrior history of satisfactory operation of mechanized material handling devices such as fork truck and scissor lift and/or willingness and ability to complete and pass training/licensing course within first week in this classification.\nA satisfactory record of recent job performance (for internal candidates, satisfactory performance would be indicated by a rating of 3 or higher in all areas of performance on the most recent evaluation including attendance). Ability and willingness to work overtime, weekends and any shift as needed.\nRegion North America - US/Puerto Rico\nCountry United States\nState Oklahoma\nCity Shawnee\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-20 20:39:18", "url": "http://find.eaton.jobs/xml/28040430/job", "country": "United States", "company": "Eaton Corporation", "title": "Assembly Cell Technician", "reqid": "51311BR", "state": "Oklahoma", "state_short": "OK", "location": "Shawnee, OK", "uid": 28040430}, {"country_short": "USA", "city": "Aurora", "description": "External Job\nTitle Supervisor - Production\nAutoReqId 50849BR\nBusiness Function Production\nDivision Hydraulics Division\nJob Description Eaton Corporation in Aurora, OH has an opening for a Production Supervisor. The Aurora Plant manufactures thermoplastic hose & tubing for use in a variety of end markets.\n\nThe Production Supervisor leads, facilitates and coordinates production activities and resources per established practices and/or policies within their job area to ensure the timely delivery of quality parts that meet or exceed customer expectations. Establishes and maintains a positive employee relations environment by adherence to Eaton\u2019s Values, Ethics and Philosophies. Clearly communicates expectations and consistently holds self and employees accountable for performance.\n\nThe essential functions of the position include, but are not limited to:\n\nA. Fosters an environment and culture leading to zero injuries and a proactive approach to improving safety. Reinforces safe behavior and housekeeping by following all safety rules and procedures in accordance with MESH including Personal Protective Equipment and Behavior Based Safety audits.\nB. Fosters an environment and culture of zero defects. Identifies opportunities to reduce scrap. Coordinates rework activities to minimize inventory investment and maintain delivery.\nC. Ensures production areas are appropriately staffed to achieve or exceed customer requirements through the use of teamwork, flexing, overtime, and cross training.\nD. Acts as an advocate for production manager, other crews, departments and the plant in general by relaying critical information related to performance issues, staffing requirements, scheduling, order status, and safety and quality issues. Provides resources to other crews and departments, as necessary. Takes appropriate actions with employees outside his/her primary crew, as necessary.\nE. Builds organizational capability by coordinating transfers, initiating opportunities for cross-training, and coaching of production leads and other employees using both structured and informal techniques. Utilizes APEX for Manufacturing performance evaluation process to establish, communicate, and monitor team member performance expectations, and respond as required to meet or exceed them in all areas of responsibility and accountability.\nF. Monitors and controls production related metrics such as headcount, overtime, scrap, OEE, etcetera.\nG. Acts as crew members\u2019 primary resource for all concerns. Engages each crew member frequently.\nH. Takes action outside of normal departmental responsibilities in urgent situations to ensure steady production, such as searching for materials and equipment, addressing technical issues, and inspecting products.\nI. Supports continuous improvement through leadership, participation and/or delegation of resources.\nJ. Audits and addresses crew members\u2019 adherence to policies and procedures.\nK. Performs staffing administration, such as timekeeping, tracking absences, and planning vacations.\nL. Leadership role in the plant's Continuous Improvement Framework - support and lead plant continuous improvement initiatives and activities.\nM. Facilitate communication among team members, between teams, and across shifts and departments, ensure communication is shared with all team members.\nBasic Qualifications (Including Educational Requirements) Bachelor's degree from an accredited institution required.\n\nLegally authorized to work in the United States without company sponsorship.\nRegion North America - US/Puerto Rico\nCountry United States\nState Ohio\nCity Aurora, OH\nEmployee category Regular\nExperience\nLevel No Minimum Experience Required\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-04-20 20:37:59", "url": "http://find.eaton.jobs/xml/28040293/job", "country": "United States", "company": "Eaton Corporation", "title": "Supervisor - Production", "reqid": "50849BR", "state": "Ohio", "state_short": "OH", "location": "Aurora, OH", "uid": 28040293}, {"country_short": "USA", "city": "Aurora", "description": "External Job\nTitle Supervisor - Production\nAutoReqId 50849BR\nDivision Hydraulics Division\nBusiness Function Production\nEmployee category Regular\nExperience\nLevel No Minimum Experience Required\nTravel Required Up to 10 percent\nJob Description Eaton Corporation in Aurora, OH has an opening for a Production Supervisor. The Aurora Plant manufactures thermoplastic hose & tubing for use in a variety of end markets.\n\nThe Production Supervisor leads, facilitates and coordinates production activities and resources per established practices and/or policies within their job area to ensure the timely delivery of quality parts that meet or exceed customer expectations. Establishes and maintains a positive employee relations environment by adherence to Eaton\u2019s Values, Ethics and Philosophies. Clearly communicates expectations and consistently holds self and employees accountable for performance.\n\nThe essential functions of the position include, but are not limited to:\n\nA. Fosters an environment and culture leading to zero injuries and a proactive approach to improving safety. Reinforces safe behavior and housekeeping by following all safety rules and procedures in accordance with MESH including Personal Protective Equipment and Behavior Based Safety audits.\nB. Fosters an environment and culture of zero defects. Identifies opportunities to reduce scrap. Coordinates rework activities to minimize inventory investment and maintain delivery.\nC. Ensures production areas are appropriately staffed to achieve or exceed customer requirements through the use of teamwork, flexing, overtime, and cross training.\nD. Acts as an advocate for production manager, other crews, departments and the plant in general by relaying critical information related to performance issues, staffing requirements, scheduling, order status, and safety and quality issues. Provides resources to other crews and departments, as necessary. Takes appropriate actions with employees outside his/her primary crew, as necessary.\nE. Builds organizational capability by coordinating transfers, initiating opportunities for cross-training, and coaching of production leads and other employees using both structured and informal techniques. Utilizes APEX for Manufacturing performance evaluation process to establish, communicate, and monitor team member performance expectations, and respond as required to meet or exceed them in all areas of responsibility and accountability.\nF. Monitors and controls production related metrics such as headcount, overtime, scrap, OEE, etcetera.\nG. Acts as crew members\u2019 primary resource for all concerns. Engages each crew member frequently.\nH. Takes action outside of normal departmental responsibilities in urgent situations to ensure steady production, such as searching for materials and equipment, addressing technical issues, and inspecting products.\nI. Supports continuous improvement through leadership, participation and/or delegation of resources.\nJ. Audits and addresses crew members\u2019 adherence to policies and procedures.\nK. Performs staffing administration, such as timekeeping, tracking absences, and planning vacations.\nL. Leadership role in the plant's Continuous Improvement Framework - support and lead plant continuous improvement initiatives and activities.\nM. Facilitate communication among team members, between teams, and across shifts and departments, ensure communication is shared with all team members.\nBasic Qualifications (Including Educational Requirements) Bachelor's degree from an accredited institution required.\n\nLegally authorized to work in the United States without company sponsorship.\nRelocation benefit provided? Yes (US/PR Only)\nCity Aurora, OH\nState Ohio", "date_new": "2012-04-19 21:05:17", "url": "http://find.eaton.jobs/xml/28014166/job", "country": "United States", "company": "Eaton Corporation", "title": "Supervisor - Production", "reqid": "50849BR", "state": "Ohio", "state_short": "OH", "location": "Aurora, OH", "uid": 28014166}, {"country_short": "USA", "city": "Charleston", "description": "External Job\nTitle CNC Machinists\nAutoReqId 51144BR\nBusiness Function Production\nDivision Hydraulics Systems Division\nJob Description Eaton Corporation is a diversified power management company with 2010 sales of $ 13.7 billion. Celebrating its 100th anniversary in 2011, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control, hydraulics components, systems and service for industrial and mobiile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance,fuel economy and safety. Eaton has aproximately 73,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.\n\nEaton - Aerospace- Charleston, currently has opportunities for 2nd and 3rd shift CNC operators.\n\nSummary of duties: The fully trained CNC Machinist will be able to set up and operate CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action to appropriate by adjusting offsets.\n\nKey responsibilites:\nProductivity per standards.\nSet & Operate CNC Machines.\nPre-Set and load tooling as appropriate into cnc machine.\nCheck accuracy of first off and per QA requirements using appropriate measuremeent tools.\nObtain & Maintain QA Certified Operator status.\n\nPREFERRED QUALIFICATIONS: Additional experience in setting up and operating CNC machines, understanding and editing program code.\nBasic Qualifications (Including Educational Requirements) Basic Qualification Requirements: Accredited High School diploma or G.E.D.\n\nMinimum one year experience or two years Trade School in CNC machine operating including :\nmachine shop measurement techniques and reading and interpreting engineering drawings and understanding Geometric Tolerancing.\n\nMust be prequalified to work on defese projects, per the state department ITAR regularions.\n\nNo relocation benefit is offered for this position. Only candidates residing in the immdiate geographic area (50 mile radius) will be considered.\nRegion North America - US/Puerto Rico\nCountry United States\nState South Carolina\nCity Charleston, SC\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-14 06:00:31", "url": "http://find.eaton.jobs/xml/27897404/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Machinists", "reqid": "51144BR", "state": "South Carolina", "state_short": "SC", "location": "Charleston, SC", "uid": 27897404}, {"country_short": "USA", "city": "Charleston", "description": "External Job\nTitle CNC Machinists\nAutoReqId 51144BR\nDivision Hydraulics Systems Division\nBusiness Function Production\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation is a diversified power management company with 2010 sales of $ 13.7 billion. Celebrating its 100th anniversary in 2011, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control, hydraulics components, systems and service for industrial and mobiile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance,fuel economy and safety. Eaton has aproximately 73,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.\n\nEaton - Aerospace- Charleston, currently has opportunities for 2nd and 3rd shift CNC operators.\n\nSummary of duties: The fully trained CNC Machinist will be able to set up and operate CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action to appropriate by adjusting offsets.\n\nKey responsibilites:\nProductivity per standards.\nSet & Operate CNC Machines.\nPre-Set and load tooling as appropriate into cnc machine.\nCheck accuracy of first off and per QA requirements using appropriate measuremeent tools.\nObtain & Maintain QA Certified Operator status.\n\nPREFERRED QUALIFICATIONS: Additional experience in setting up and operating CNC machines, understanding and editing program code.\nBasic Qualifications (Including Educational Requirements) Basic Qualification Requirements: Accredited High School diploma or G.E.D.\n\nMinimum one year experience or two years Trade School in CNC machine operating including :\nmachine shop measurement techniques and reading and interpreting engineering drawings and understanding Geometric Tolerancing.\n\nMust be prequalified to work on defese projects, per the state department ITAR regularions.\n\nNo relocation benefit is offered for this position. Only candidates residing in the immdiate geographic area (50 mile radius) will be considered.\nRelocation benefit provided? No\nCity Charleston, SC\nState South Carolina", "date_new": "2012-04-13 22:52:05", "url": "http://find.eaton.jobs/xml/27887063/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Machinists", "reqid": "51144BR", "state": "South Carolina", "state_short": "SC", "location": "Charleston, SC", "uid": 27887063}, {"country_short": "USA", "city": "White City", "description": "External Job\nTitle Machinist/CNC Operator\nAutoReqId 51014BR\nBusiness Function Production\nDivision Hydraulics Division\nJob Description Eaton Hydraulics, a Fortune 200 manufacturing firm in White City, Oregon has an opening for a CNC/Manual Machinist.\n\nThe primary responsibilities of the position include, but are not limited to: Set up and operate a CNC Lathe and Machine Center plus other manual equipment to perform a normal range of operations on cylinder components generally 6 inch bore or less. Operations include drilling, threading, tapping, recessing, finish turning, single point treading, boring, forming, reaming, counter boring, counter-sinking, spot facing, deburring and other similar machining operations to produce standard cylinder components. Cleaning and oiling of parts as required. Work with ferrous and nonferrous metals. Responsible for inspection and quality of all parts.\n\nPosition criteria-\n-Ability to read and use blueprints.\n-Abilities in the use of micrometers, verniers, indicators, and various other measuring instruments.\n\nPreferred Qualifications-\n-CNC programming and HAAS experience\nBasic Qualifications (Including Educational Requirements) - High school diploma and/or equivalent\n- Must have the equivalent of 1 year experience in set up and operation of CNC lathes, plus drilling, milling and manual machining.\nRegion North America - US/Puerto Rico\nCountry United States\nState Oregon\nCity White City\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-11 06:25:11", "url": "http://find.eaton.jobs/xml/27808296/job", "country": "United States", "company": "Eaton Corporation", "title": "Machinist/CNC Operator", "reqid": "51014BR", "state": "Oregon", "state_short": "OR", "location": "White City, OR", "uid": 27808296}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle CNC Machinist\nBusiness Function Production\nEmployee category Regular\nAutoReqId 50780BR\nDivision Fuel Systems Division\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a CNC Machinist.\n\nThe CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets.\n\nKey responsibilities\n\n\u2022 Production of Cell specific components whilst adhering to strict guidelines\n\u2022 Set & Operate CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer\n\u2022 Pre-set and load tooling as appropriate into CNC machine\n\u2022 Check accuracy of first off\n\u2022 Check accuracy of parts using appropriate measurement tools\n\u2022 Take corrective action to rectify errors by offset adjustment on CNC machine\n\u2022 Undertake inspection process of other team members work when required\n\u2022 Obtain & Maintain A Stamp\u201d Approval status for machines and processes\n\u2022 Assist in De-Burring as required\n\u2022 Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events\n\u2022 Work on own initiatives and resolve any issues or problems to company specific procedures.\n\nExperience Required:\n\n\u2022 Previous experience in setting and operating CNC Turning together with Milling and Mill/Turning Machines (this is advantageous to have both qualities)\n\u2022 Conversant with Machine Shop Measurement Techniques\u2013 using appropriate measurement equipment e.g. Digital calipers, micrometer use of thread checking equipment\n\u2022 Ability to Read and interpret Engineering Drawings, with a practical working understanding of Geometric Tolerancing (use of geometric symbols).\n\u2022 Full training will be provided\n\u2022 Aerospace knowledge is beneficial\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications required\n\n\u2022 Apprentice Qualified or similarly experienced Machinist with CNC Turning and/or Milling experience\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-04-05 09:14:34", "url": "http://find.eaton.jobs/xml/27662449/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "CNC Machinist", "reqid": "50780BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 27662449}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle CNC Machinist\nAutoReqId 50780BR\nBusiness Function Production\nDivision Fuel Systems Division\nEmployee category Regular\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a CNC Machinist.\n\nThe CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets.\n\nKey responsibilities\n\n\u2022 Production of Cell specific components whilst adhering to strict guidelines\n\u2022 Set & Operate CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer\n\u2022 Pre-set and load tooling as appropriate into CNC machine\n\u2022 Check accuracy of first off\n\u2022 Check accuracy of parts using appropriate measurement tools\n\u2022 Take corrective action to rectify errors by offset adjustment on CNC machine\n\u2022 Undertake inspection process of other team members work when required\n\u2022 Obtain & Maintain A Stamp\u201d Approval status for machines and processes\n\u2022 Assist in De-Burring as required\n\u2022 Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events\n\u2022 Work on own initiatives and resolve any issues or problems to company specific procedures.\n\nExperience Required:\n\n\u2022 Previous experience in setting and operating CNC Turning together with Milling and Mill/Turning Machines (this is advantageous to have both qualities)\n\u2022 Conversant with Machine Shop Measurement Techniques\u2013 using appropriate measurement equipment e.g. Digital calipers, micrometer use of thread checking equipment\n\u2022 Ability to Read and interpret Engineering Drawings, with a practical working understanding of Geometric Tolerancing (use of geometric symbols).\n\u2022 Full training will be provided\n\u2022 Aerospace knowledge is beneficial\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications required\n\n\u2022 Apprentice Qualified or similarly experienced Machinist with CNC Turning and/or Milling experience\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-04-04 19:13:53", "url": "http://find.eaton.jobs/xml/27642722/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "CNC Machinist", "reqid": "50780BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 27642722}, {"country_short": "USA", "city": "Smyrna", "description": "External Job\nTitle Technician-I (Smyrna, GA)\nAutoReqId 50786BR\nBusiness Function Production\nDivision Commercial Distribution & Control Assemblies\nJob Description Eaton, a leading manufacturer of Panelboards, Switchboards for the commercial and construction industries is seeking a highly promotable, talented individual to be a part of our elite all-salaried workforce. Currently, there are two exciting new openings for Operations Technicians located at our Smyrna (Atlanta), Georgia Satellite. These positions support the Satellite Operations - a complex growing operation with approximately $315 million in sales, 400+ employees in 18 remote plants in the United States. If you have a strong work ethic, a desire to be part of a world-class organization, and the ability to work well in a team environment, we would like to speak with you.\n\nJob responsibilities may include: assemble, fit and mount sub-assemblies, components, and standard fixed assemblies in electrical control equipment. Perform assembly required for test preparation and final inspection. Use established power checking procedures and equipment to verify electrical/mechanical integrity of units assembled. Stage parts for customer orders.\n\nTo be considered for employment, candidates must possess the following background:\n\n\u2022 Have a high school diploma or GED\n\u2022 Experience in manufacturing setting conducting mechanical assembly work as described above\n\u2022 Experience using fork truck\n\u2022 Experience in reading control drawings and working with electrical equipment is preferred.\n\nIn return, we offer a competitive salary package based on skills and experience, and a comprehensive fringe benefits program including pension plan, 401k, medical, dental, tuition reimbursement, vacation, along with excellent working conditions. You will be eligible for benefits coverage on your first day of employment.\n\nIf you are interested in applying, please apply on-line at www.eatonjobs.com. No phone calls please.\n\nCome Join a Winning Team!!! Eaton Corporation is an Affirmative Action/EEO Employer M/F/V/D\nBasic Qualifications (Including Educational Requirements) BASIC QUALIFICATIONS:\n\u2022 High School Diploma or G.E.D. required\n\u2022 Minimum of 1 year experience working in a manufacturing setting\n\u2022 Experience working in a team environment\n\nADDITIONAL PREFFERED QUALIFICATIONS:\n\u2022 Experience using various tools, including: Manual/electric/pneumatic tools, fork truck, jib crane, template/fixtures, hand carts, measuring and testing equipment, storage/packaging materials and prescribed safety equipment.\n\u2022 Good record of job performance, safety, and attendance.\n\u2022 Good understanding of blue print/schematics, and wiring experience.\n\u2022 Experience in reading control drawings and working with electrical equipment.\n\nPHYSICAL DEMANDS: While performing the duties of this job the employee is regularly required to stand, walk, stoop, squat, reach to or below shoulder level, lift, carry, push, pull, and use hands to handle and feel. The employee is frequently required to climb and reach above shoulder level. The employee is regularly required to lift/carry up to 35 pounds. The employee is frequently required to push/pull up to 35 pounds. The employee is occasionally required to push/pull greater than 50 pounds with assistance.\nRegion North America - US/Puerto Rico\nCountry United States\nState Georgia\nCity Smyrna\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-30 21:59:53", "url": "http://find.eaton.jobs/xml/27527671/job", "country": "United States", "company": "Eaton Corporation", "title": "Technician-I (Smyrna, GA)", "reqid": "50786BR", "state": "Georgia", "state_short": "GA", "location": "Smyrna, GA", "uid": 27527671}, {"country_short": "USA", "city": "Arden", "description": "External Job\nTitle Manufacturing Test and Controls Engineer\nAutoReqId 50677BR\nBusiness Function Engineering\nDivision Power Distribution & Controls Assemblies\nJob Description Eaton Corporation located in Asheville, NC has an opening for a Manufacturing Test and Controls Engineer.\n\nThe Manufacturing Test & Controls Engineer is responsible for portions of design, development, fabrication, validation, installation and support of production test equipment.\n\nA. Design test equipment and safety standards for performing testing of power distribution and control or similar products.\nB. Procurement of components and materials to construct test equipment in accordance with design and applicable safety standards.\nC. Provide technical assistance to project teams (ProLaunch) regarding processing of component parts or assemblies and how product design can influence product / process quality/manufacturing safety.\nD. Develop test equipment specification insuring compliance with NFPA 70E and OSHA regulations to safely validate that products meets design specification and provides the necessary outputs to control the process.\nE. Ensure test equipment is fabricated to design specification and any applicable safety requirements.\nF. Develop software for test equipment functionality including a working program that ensures proper test equipment functionality.\nG. Evaluate machine / equipment alternatives for replacement or addition to manufacturing facilities.\nH. Work with suppliers to ensure accurate quotation of equipment that satisfies price, delivery and technical adequacy requirements.\nI. Participate and/or conduct run-off of new machines / equipment to ensure process capability and MESH compliance. Run-offs include process capability calculation or Measurement System Analysis (MSA)\nJ. Install, upgrade, and/or modify equipment at production facilities including test equipment, poka-yokes, and other control devices. Manage the PPE and voltage rated tools, supplies needed to safely complete test processes.\nK. Develop and assist in creating or updating test procedures and methodology.\nL. Perform troubleshooting and repair of production test equipment. Perform operational and fault isolation test on test systems. Develop diagnostic systems to minimize the troubleshooting requirements.\nM. Manage project work to meet project timelines and completion of ProLaunch, DFSS, and other project deliverables.\nN. Provide training including electrical safe work practice and operation of test equipment to operators and technicians as appropriate.\nO. Work with manufacturing, MESH and Quality engineering functions, product design engineering, suppliers, and customers as needed.\nBasic Qualifications (Including Educational Requirements) ? Bachelor of Science degree in Electrical Engineering or Computer Engineering from an accredited institution required.\n? Minimum of 3 years experience in electrical and/or test system engineering required.\n? Licensed or certified professional engineer in a requirement.\n? Must be eligible to work in the U.S. without company sponsorship.\n\n\nPosition Criteria:\n? Electrical, mechanical, instrumentation, and test system equipment design background.\n? Experience designing and supporting test systems based on PC and PLC systems, especially for a manufacturing environment.\n? Experience with digital communication systems such as shop floor or component data links.\n? Experience with sensing technologies. In addition, familiarity with motors and motion control technology.\n? Excellent working knowledge of LabVIEW is required. Also, a working knowledge of TestStand is preferred.\n? Familiar with manufacturing process development, pFMEAs, and control plans.\n? Working knowledge of ISO 9001 requirements and statistical analysis.\n? Excellent communication and teaming skills.\nRegion North America - US/Puerto Rico\nCountry United States\nState North Carolina\nCity Arden\nEmployee category Regular\nExperience\nLevel Minimum 3 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-03-29 20:52:42", "url": "http://find.eaton.jobs/xml/27494987/job", "country": "United States", "company": "Eaton Corporation", "title": "Manufacturing Test and Controls Engineer", "reqid": "50677BR", "state": "North Carolina", "state_short": "NC", "location": "Arden, NC", "uid": 27494987}, {"country_short": "USA", "city": "Aurora", "description": "External Job\nTitle Material Handler\nAutoReqId 50611BR\nBusiness Function Production\nDivision Hydraulics Division\nJob Description Eaton Corporation located in Aurora, Ohio, has an opening for a 2nd & 3rd shift Material Handler/Forklift Operator.\n\nPosition is responsible for the physical movement of material using towmotor to support production. Supply materials to production lines and coordinate scrap trailer to assure timely disposal of scrap. Perform inventory computer transactions in QAD business system to support actual physical movement of materials. Load and unload the shuttle trailer. Bail cardboard as required. Empty all dumpsters located throughout the facility. Following all necessary precautions, handle hazardous materials as they arrive in the plant. Backup support for Receiving and Shipping, as required. Adheres to safety policies. Check the lift truck for safe operating conditions. Generally, perform all other duties as required. Operate material handling equipment as required to support job function.\nBasic Qualifications (Including Educational Requirements) Minimum 2 years forklift experience in a manufacturing environment. Incumbent must have the ability to work without direct supervision, know basic arithmetic, and basic computer skills, have good verbal communication skills, and able to work in a fast-paced environment with changing priorities. Must be open to extensive training. High school diploma or GED equivalent required.\nRegion North America - US/Puerto Rico\nCountry United States\nState Ohio\nCity Aurora, OH\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-27 18:22:22", "url": "http://find.eaton.jobs/xml/27418464/job", "country": "United States", "company": "Eaton Corporation", "title": "Material Handler", "reqid": "50611BR", "state": "Ohio", "state_short": "OH", "location": "Aurora, OH", "uid": 27418464}, {"country_short": "USA", "city": "Inglewood", "description": "External Job\nTitle Repair Technician\nAutoReqId 50491BR\nBusiness Function Production\nDivision Fuel Systems Division\nJob Description Eaton's Aerospace Group located in Inglewood, CA has an opening for a MRO (Maintenance, Repair and Overhaul) Technican.\n\nThis position will be responsible for the disassemble, repair, overhaul and test of engine driven fuel pumps for the MRO department.\n\nCritical for success in this role is the ability to:\n\n\u2022Disassemble, inspect, disposition and reassemble customer field returns in accordance with component overhaul manuals and/or other approved technical documents.\n\u2022Perform all tasks to the Federal Aviation Administation(FAA), European Aviation Safety Agency (EASA) and Civil Aviation Administration of China (CAAC) approved procedures. Order parts for rebuild using the Material Requirements Planning (MRP) system.\n\u2022Prepare a concise and accurate documentation package for every repaired or overhauled unit.\n\u2022Effectively communicate with customers and auditors as needed.\n\u2022Possess a clear understanding of all FAA, EASA, and CAAC approved procedures. Maintain a current knowledge of all requirements.\n\u2022Participate in departmental continuous improvement projects.\n\u2022Perform other duties as directed by your supervisor, which could include receiving/shipping, final test, pump testing and non-destructive testing.\n\u2022Train other technicians as required in the repair of fuel pumps.\n\u2022Be available for shift work as required.\n\nPreferred Qualifications:\n\n\u2022Ability to use measurement & other specialized inspection equipment.\n\u2022Understanding of CMM's, S/B's, engineering drawings and repair sketches.\n\u2022Excellent interpersonal skills; in particular utilizing sound judgment and training skills.\n\u2022Proficient in Microsoft Office Suite; Word, Excel, PowerPoint and Outlook.\nBasic Qualifications (Including Educational Requirements) \u2022Must have a High School diploma or equivalent.\n\u2022Must be able to read and write in the English language.\n\u2022Minimum 2 years aircraft/engine accessory experience, or possess aircraft/power plant mechanics license.\n\u2022Must be prequalified to work on defense projects, per the state department ITAR regulations.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Inglewood\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-23 18:24:33", "url": "http://find.eaton.jobs/xml/27350896/job", "country": "United States", "company": "Eaton Corporation", "title": "Repair Technician", "reqid": "50491BR", "state": "California", "state_short": "CA", "location": "Inglewood, CA", "uid": 27350896}, {"country_short": "USA", "city": "Euclid", "description": "External Job\nTitle Certified NC Jig Bore\nAutoReqId 50510BR\nBusiness Function Production\nDivision Fuel Systems Division\nJob Description Eaton's Aerospace Group located in Euclid, OH has an opening for a NC Jig Bore machinist.\n\nCritical for success in this role is the ability to:\n\n\u2022Set-up, maintain, and operate one or more tape or direct computer controller N/C machines and/or precision mill/bore/grind machines to produce finished dimensions and characteristics on a variety of tooling and/or production parts and components.\n\u2022Perform visual and dimensional inspections and maintain accurate documentation on a variety of parts in accordance with ANSI Y14-5 and the certified operator program.\n\u2022Assist other operators on proper operational procedures.\n\u2022Perform housekeeping and other job related duties as assigned by supervisor.\n\u2022Perform sub-assembly operations.\n\u2022Perform power flush operations.\n\u2022Use equipment to machine or inspect a variety of first run sample, or production parts or assemblies.\n\u2022Obtain, read, and interpret complex prints for dimensions and other data.\n\u2022Obtain gages, tapes, process set-up sheet, fixtures, and tools. Determine set-up work sequence, dimensional sizes, positioning and tolerances.\n\u2022Assemble and pre-set tools and with the aid of indicators, surface plate, micrometers, gages, special fixtures or optical tool setting equipment to predetermined dimensions.\n\u2022Complete all necessary preparatory work such as alignment of part, table and indexing position, spindle position, etc., prior to actual work.\n\u2022Use a variety of standard gages, measuring devices and complex precision gages such as air gages and electronic gages to check work and determine conformance to specifications.\n\u2022Parts worked on may have extremely tight tolerances and require a high degree of attentiveness to the process.\n\u2022Install and thread tape in reading head of control system or notify computer to set-up part program. Operate machine to verify tape for tool selections, tool settings, and speeds and feeds as specified on set-up sheet prior to machining part.\n\u2022Monitor cutting action, observe control panel indicators, positioning and sequence display lights to detect errors. Correct malfunctions: Calculate and actuate control movements essential to relieving cutting problems caused by tool jamming and tool breakage, which are incidental to the multi-plane action of the machine.\n\u2022May be required to make minor changes through editing of data in CNC Controller.\n\u2022Perform necessary part marking.\n\u2022Maintain set-up by changing and resetting tools, changing tapes, realigning fixtures, and making necessary control adjustments to obtain size, form, location and finish.\n\u2022Work cooperatively with the programmer, engineer, and foreman to prove out new tapes and tooling, which may include the reworking of fixtures.\n\u2022Maintain accurate lot control (QCP 6.0) traceability, record keeping, log book entries, NCR\u2019s (QCP 11.0) and associated documentation.\nBasic Qualifications (Including Educational Requirements) \u2022Must have a High School Diploma or equivalent.\n\u2022Have 2 years set-up and operation of precision milling machines; one year of which must be on NC/CNC machining centers.\n\u2022Become a certified operator within 40 days of becoming active on the code.\n\u2022Pass Eaton Math/Blueprint Reading Assessments.\n\u2022Pass Eaton Vision test.\n\u2022Have applicable personal tools and gages.\n\u2022Must be prequalified to work on defense projects, per the state department ITAR regulations.\nRegion North America - US/Puerto Rico\nCountry United States\nState Ohio\nCity Euclid\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-22 20:33:07", "url": "http://find.eaton.jobs/xml/27325441/job", "country": "United States", "company": "Eaton Corporation", "title": "Certified NC Jig Bore", "reqid": "50510BR", "state": "Ohio", "state_short": "OH", "location": "Euclid, OH", "uid": 27325441}, {"country_short": "USA", "city": "Euclid", "description": "External Job\nTitle Certified NC Jig Bore\nAutoReqId 50509BR\nBusiness Function Production\nDivision Fuel Systems Division\nJob Description Eaton's Aerospace Group located in Euclid, OH has an opening for a NC Jig Bore machinist.\n\nCritical for success in this role is the ability to:\n\n\u2022Set-up, maintain, and operate one or more tape or direct computer controller N/C machines and/or precision mill/bore/grind machines to produce finished dimensions and characteristics on a variety of tooling and/or production parts and components.\n\u2022Perform visual and dimensional inspections and maintain accurate documentation on a variety of parts in accordance with ANSI Y14-5 and the certified operator program.\n\u2022Assist other operators on proper operational procedures.\n\u2022Perform housekeeping and other job related duties as assigned by supervisor.\n\u2022Perform sub-assembly operations.\n\u2022Perform power flush operations.\n\u2022Use equipment to machine or inspect a variety of first run sample, or production parts or assemblies.\n\u2022Obtain, read, and interpret complex prints for dimensions and other data.\n\u2022Obtain gages, tapes, process set-up sheet, fixtures, and tools. Determine set-up work sequence, dimensional sizes, positioning and tolerances.\n\u2022Assemble and pre-set tools and with the aid of indicators, surface plate, micrometers, gages, special fixtures or optical tool setting equipment to predetermined dimensions.\n\u2022Complete all necessary preparatory work such as alignment of part, table and indexing position, spindle position, etc., prior to actual work.\n\u2022Use a variety of standard gages, measuring devices and complex precision gages such as air gages and electronic gages to check work and determine conformance to specifications.\n\u2022Parts worked on may have extremely tight tolerances and require a high degree of attentiveness to the process.\n\u2022Install and thread tape in reading head of control system or notify computer to set-up part program. Operate machine to verify tape for tool selections, tool settings, and speeds and feeds as specified on set-up sheet prior to machining part.\n\u2022Monitor cutting action, observe control panel indicators, positioning and sequence display lights to detect errors. Correct malfunctions: Calculate and actuate control movements essential to relieving cutting problems caused by tool jamming and tool breakage, which are incidental to the multi-plane action of the machine.\n\u2022May be required to make minor changes through editing of data in CNC Controller.\n\u2022Perform necessary part marking.\n\u2022Maintain set-up by changing and resetting tools, changing tapes, realigning fixtures, and making necessary control adjustments to obtain size, form, location and finish.\n\u2022Work cooperatively with the programmer, engineer, and foreman to prove out new tapes and tooling, which may include the reworking of fixtures.\n\u2022Maintain accurate lot control (QCP 6.0) traceability, record keeping, log book entries, NCR\u2019s (QCP 11.0) and associated documentation.\nBasic Qualifications (Including Educational Requirements) \u2022Must have a High School Diploma or equivalent.\n\u2022Have 2 years set-up and operation of precision milling machines; one year of which must be on NC/CNC machining centers.\n\u2022Become a certified operator within 40 days of becoming active on the code.\n\u2022Pass Eaton Math/Blueprint Reading Assessments.\n\u2022Pass Eaton Vision test.\n\u2022Have applicable personal tools and gages.\n\u2022Must be prequalified to work on defense projects, per the state department ITAR regulations.\nRegion North America - US/Puerto Rico\nCountry United States\nState Ohio\nCity Euclid\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-22 20:32:09", "url": "http://find.eaton.jobs/xml/27325378/job", "country": "United States", "company": "Eaton Corporation", "title": "Certified NC Jig Bore", "reqid": "50509BR", "state": "Ohio", "state_short": "OH", "location": "Euclid, OH", "uid": 27325378}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Project Engineer\nAutoReqId 50005BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Project Engineer. This position will lead an engineering team performing conceptual design, development and qualification of hydraulic valves, actuators and reservoirs for various commercial and military applications, including nose wheel steering, landing gear control, general aircraft hydraulic systems. Successful candidates will be able to independently lead a major project from initial design conception through the design phases, up to and including qualification and transition to production. The position requires the use of six sigma tools to ensure project success and may involve use of some earned value tools.\n\nDuties and Responsbilities:\n\n1. Lead teams engaged in any or all of the activities below. Provide mentorship, technical advice, and oversight to component design engineers locally and at other Eaton or vendor sites, locally and globally.\n2. Estimate labor/material budgets for new and scope change proposals. Establish design-to-cost (DTC) models and track configurations to DTC compliance per company practices.\n3. Establish technical work breakdown structures and budget estimates in conjunction with Program Management and Engineering Resource Managers. Manage progress to engineering task plans and schedules through the project, including variance analysis of earned value metrics as appropriate.\n4. Develop appropriate allocations, and design margin strategy, of system requirements to component attributes including derived characteristics. Assist in review and refinement of system or component specifications. Develop and maintain specification compliance data throughout the product development life cycle.\n5. Lead component development by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other engineers. Apply engineering knowledge and 3D modeling skills to develop designs compliant with internal and external standard practices.\n6. Develop, execute, and manage a risk management plan including risk mitigation tasks. Solve technical problems with products and designs; drive teams to efficiently and effectively execute problem solving assignments.\n7. Lead the team in utilizing six sigma tools (especially design for six sigma) to ensure that critical to quality measures are defined and tracked through the design and validation process. Conduct reviews to ensure that design variability and process capability are understood and defined in design documentation.\n8. Prepare technical presentations for internal and external customers, including preliminary/critical design reviews and other reviews as required.\n9. Participate in and lead meetings with the customer and other engineers, distributing the results to the development team and coordinating actions as necessary. Ensure information flow within the local Eaton team, with other Eaton sites (locally and globally), and contractor teams as appropriate to facilitate work flow, efficiency and quality of work results delivered to the customer\n10. Prepare or approve SDRL documents, including analysis reports, certification reports etc.\n11. Participate in the component/system qualification process in conjunction with the Eaton and outside test laboratories.\n12. Perform other duties as assigned.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\n- Bachelor of Science Degree in Engineering from an accredited institution is required.\n- Minimum 5 years of engineering experience in an Aerospace, Automotive, or Medical Device environment.\n- This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\n\nPosition Criteria:\n\n- Ability to understand system and customer specifications, layouts and functions, and the interfaces to other platform systems.\n- Familiarity with manufacturing and ability to work closely with manufacturing engineers to make use of process capability data in design.\n- Good written, oral and presentation skills, leadership qualities and the ability to work well with customers and development team members.\n\n\nPreferred Qualifications:\n\n- 2 years of project management/engineering experience in a cross-functional product team\n- Experience with aircraft component development (experience with valves, landing gear, and hydraulic components)\n- Experience with CATIA/ProE, Matlab/Simulink, and stress analysis tools\n- Experience with tools used for requirements flow-down / traceability (e.g. DOORS)\n- Experience with earned values tools\n- Experience with six sigma tools ( e.g. DFMEA, QFD, Crystal Ball simulation, etc.)\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-03-15 22:58:56", "url": "http://find.eaton.jobs/xml/27180615/job", "country": "United States", "company": "Eaton Corporation", "title": "Project Engineer", "reqid": "50005BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27180615}, {"country_short": "USA", "city": "Charleston", "description": "External Job\nTitle CNC Deburr/Utility\nAutoReqId 48016BR\nDivision Hydraulics Systems Division\nBusiness Function Production\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation is a diversified power management company with 2010 sales of $ 13.7 billion. Celebrating its 100th anniversary in 2011, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control, hydraulics components, systems and service for industrial and mobiile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance,fuel economy and safety. Eaton has aproximately 73,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.\n\nEaton - Aerospace- Charleston, currently has opportunities for 2nd and 3rd shift deburr operators.\n\nSummary of duties: The fully trained deburr / utility operators will be able to\nchoose and use various deburr tools, knives and equipment to correctly perform prescribed functions on drawing.\n\nAlso to deburr outside of required parts (tops of bores, O.D. edges, Kingsbury slots, break edge on oil holes and counter bores, etc. meetig quality specifications.\n\nAlso the ability to set up/ use and operatespeedheads, wire brush and scotch bright wheels, bench grinder, harperizer, polishers, degreaser, washers, Tropel Flatmaster, profilometer, sand blaster, sonic cleaning, buffer, washer, tumbler, polisher, and the associated vacuum systems\nin order to produce parts to engineering technical drawings following set operating procedures.\n\nThe ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action to appropriate by adjusting offsets.\n\nKey responsibilites:\nProductivity per standards.\nSet upand operate appropriate equipment and use appropriate measuremeent tools.\n\nLearn and apply lean principles/ 5S tools, etc.\nBasic Qualifications (Including Educational Requirements) Basic Qualification Requirements: Accredited High School diploma or G.E.D.\n\nMinimum one year experience in industrial manufacturing machine operating environment or two years Trade School in related manufacturing program.\n\nMinimum one year experience year experience in industrial manufacturing machine operating environment or two years Trade School in related manufacturing program with realted measurement techniques - using appropriate measurement equipment, dial calipers, micrometer.\n\nMinimum one year experience in an\nindustrial manufacturing machine operating environment or two years Trade School in related manufacturing program in reading and interpreting engineering drawings understanding Geometric Tolerancing.\n\nSpeak, read and write English.\n\nLegally authorized to work in the U.S. This role is subject to International Traffic in Arms Regulations (ITAR) and therefore threfore may be restrictions on who can work on these products.\n\nNo relocation benefit is offered for this position.  Only candidates residing in the immdiate geographic area (50 mile radius) will be considered.\n\nPREFERRED QUALIFICATIONS: Additional experience in industrial machine operating.\nRelocation benefit provided? No\nCity Charleston, SC\nState South Carolina", "date_new": "2012-03-08 19:31:35", "url": "http://find.eaton.jobs/xml/27013004/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Deburr/Utility", "reqid": "48016BR", "state": "South Carolina", "state_short": "SC", "location": "Charleston, SC", "uid": 27013004}, {"country_short": "USA", "city": "Jackson", "description": "External Job\nTitle Assembler\nAutoReqId 49688BR\nBusiness Function Production\nDivision Hydraulics Division\nJob Description Eaton Corporation, a Fortune 200 Diversified Industrial Manufacturer, has 2 openings for 2nd shift Assemblers to join our Hydraulics team in Jackson, MI.\n\nThe position will be responsible for Assembling a wide variety of medium and small bore cylinders. The position may also require other duties including, but not limited to: inspection, testing, painting, and packing.\nPosition criteria-\n-Ability to read and use blueprints.\n-Abilities in the use of micrometers, verniers, and various other measuring instruments.\n\nIf interested, please apply through our careers page at www.eaton.com/careers.\nBasic Qualifications (Including Educational Requirements) - All candidates must have a high school diploma or equivalent.\nRegion North America - US/Puerto Rico\nCountry United States\nState Michigan\nCity Jackson, MI\nEmployee category Regular\nExperience\nLevel No Minimum Experience Required\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-03 00:29:11", "url": "http://find.eaton.jobs/xml/26904819/job", "country": "United States", "company": "Eaton Corporation", "title": "Assembler", "reqid": "49688BR", "state": "Michigan", "state_short": "MI", "location": "Jackson, MI", "uid": 26904819}, {"country_short": "USA", "city": "Jackson", "description": "External Job\nTitle Sub-Assembler\nAutoReqId 49743BR\nBusiness Function Production\nDivision Hydraulics Division\nJob Description Eaton Corporation, a Fortune 200 Diversified Industrial Manufacturer, has an opening for a 2nd shift Assembler to join our Hydraulics team in Jackson, MI.\n\nThe position will be responsible for assembling a wide variety of components in preparation for final assembly. Within our fast paced environment, this position will gather necessary components, clean and assemble as needed. Assist in main assembly and other areas as required.\n\nPosition criteria-\n\n-Ability to read and use blueprints.\n-Abilities in the use of micrometers, verniers, and various other measuring instruments.\n\nIf interested, please apply through our careers page at www.eaton.com/careers.\nBasic Qualifications (Including Educational Requirements) - All candidates must have a high school diploma or equivalent\nRegion North America - US/Puerto Rico\nCountry United States\nState Michigan\nCity Jackson, MI\nEmployee category Regular\nExperience\nLevel No Minimum Experience Required\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-03 00:27:29", "url": "http://find.eaton.jobs/xml/26904795/job", "country": "United States", "company": "Eaton Corporation", "title": "Sub-Assembler", "reqid": "49743BR", "state": "Michigan", "state_short": "MI", "location": "Jackson, MI", "uid": 26904795}, {"country_short": "USA", "city": "Mountain Home", "description": "External Job\nTitle Production Supervisor\nAutoReqId 49934BR\nBusiness Function Production\nDivision Hydraulics Division\nJob Description Eaton Corporation has an opening for an off-shift Production Supervisor in Mountain Home, Arkansas.\n\nThe Eaton facility in Mountain Home manufactures hydraulic hose for the heavy commercial equipment, high performance (NASCAR), and distribution markets.\n\nMountain Home is located in the Ozark Mountains and is consistently listed as one of the most desirable locations to live. Two outstanding freshwater lakes, highly rated regional hospital services and excellent schools all contribute to the quality of life.\n\nThe Production Supervisor will need to possess the ability to work in a fast learning and adaptive culture. Supervisors are responsible for, supporting the development of the continuous improvement culture by motivating and rewarding team leaders and teammates, effectively transitioning teammates from home to work (start up meetings), knowing and developing people; supporting and executing the development of production floor teammate flexibility (cross-training); checking the process - ensure conformance to standard work and reinforcing good behaviors; communicating any issues to the appropriate resources in a timely manner; evaluating and reviewing plant balance boards; identifying abnormal issues and taking action accordingly to ensure manufacturing goals are achieved; reviewing and monitoring scrap and OEE charts; reviewing all visual controls on a daily basis supporting EHS, ELS and EQS systems; ensuring expectations are adhered to; monitoring and communicating on a regular basis to ensure compliance, monitoring and evaluating manpower; schedules overtime requirements in line with manufacturing goals; and working in a safe manner and performs other duties as necessary.\nBasic Qualifications (Including Educational Requirements) Four year degree in business or a related field\nPrevious experience in a leadership role\nLeadership experience in a manufacturing environment preferred\nRegion North America - US/Puerto Rico\nCountry United States\nState Arkansas\nCity Mountain Home\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-03-01 22:01:20", "url": "http://find.eaton.jobs/xml/26871693/job", "country": "United States", "company": "Eaton Corporation", "title": "Production Supervisor", "reqid": "49934BR", "state": "Arkansas", "state_short": "AR", "location": "Mountain Home, AR", "uid": 26871693}, {"country_short": "USA", "city": "Searcy", "description": "External Job\nTitle CNC Programming Technician - 1st Shift\nAutoReqId 49700BR\nBusiness Function Production\nDivision Hydraulics Division\nJob Description Eaton Corporation located in Searcy, AR has an opening for a CNC Programming Technician. In this highly visible position, the essential functions will include:\n\n- Ability to modify and create programs with proper tool sequence and feeds/speeds to optimize machining programs\n- Set up, adjust, prove out programs and operate CNC machine tools to exact tolerances\n- Provide constructive input on machining efficiency improvements and cost versus benefit analysis of new tooling considerations\n- Operate CAD software such as AutoCAD, ProE, etc.\n- Work from drawings, specifications, programs, set up instructions and other data to meet deadlines\n- Operate a CMM, height gages, calipers, micrometers, profilometers and other gages to verify part quality\n- Will have the ability to manipulate part geometry for CNC programs in CAM software\n- Evaluate and approve program integrity prior to release to the shop floor\n- Evaluate fixtures required and confirm need with vendors as well as the tool room\n- Assist cross-functional groups with programming support\n- Will have the ability to provide manufacturing labor and materials cost estimates for new products and processes\n\nAll applications must go through www.eatonjobs.com. Third party and unsolicited applications will not be accepted.\nBasic Qualifications (Including Educational Requirements) Required:\n- High School degree or equivalent\n- Must have the ability to read, analyze, and interpret information I.e. drawings, CMM reports, engineering standards, JIP sheets, etc.\n- Experience writing programs for horizontal machining centers and / or turning machines\n- Experience with Microsoft Excel and Outlook\n- Demonstrated ability of using a CAM software package\n\nPreferred:\n- Associates degree in technology, engineering, or related field\n- Courses in mechanical drawing, shop mathematics, and machining practices\n- CMM programming experience\n- Prior experience in the CAM software of Esprit\nRegion North America - US/Puerto Rico\nCountry United States\nState Arkansas\nCity Searcy\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-02-22 20:13:14", "url": "http://find.eaton.jobs/xml/26686686/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Programming Technician - 1st Shift", "reqid": "49700BR", "state": "Arkansas", "state_short": "AR", "location": "Searcy, AR", "uid": 26686686}, {"country_short": "USA", "city": "Searcy", "description": "External Job\nTitle CNC Programming Technician - 1st Shift\nAutoReqId 49700BR\nDivision Hydraulics Division\nBusiness Function Production\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation located in Searcy, AR has an opening for a CNC Programming Technician. In this highly visible position, the essential functions will include:\n\n- Ability to modify and create programs with proper tool sequence and feeds/speeds to optimize machining programs\n- Set up, adjust, prove out programs and operate CNC machine tools to exact tolerances\n- Provide constructive input on machining efficiency improvements and cost versus benefit analysis of new tooling considerations\n- Operate CAD software such as AutoCAD, ProE, etc.\n- Work from drawings, specifications, programs, set up instructions and other data to meet deadlines\n- Operate a CMM, height gages, calipers, micrometers, profilometers and other gages to verify part quality\n- Will have the ability to manipulate part geometry for CNC programs in CAM software\n- Evaluate and approve program integrity prior to release to the shop floor\n- Evaluate fixtures required and confirm need with vendors as well as the tool room\n- Assist cross-functional groups with programming support\n- Will have the ability to provide manufacturing labor and materials cost estimates for new products and processes\n\nAll applications must go through www.eatonjobs.com. Third party and unsolicited applications will not be accepted.\nBasic Qualifications (Including Educational Requirements) Required:\n- High School degree or equivalent\n- Must have the ability to read, analyze, and interpret information I.e. drawings, CMM reports, engineering standards, JIP sheets, etc.\n- Experience writing programs for horizontal machining centers and / or turning machines\n- Experience with Microsoft Excel and Outlook\n- Demonstrated ability of using a CAM software package\n\nPreferred:\n- Associates degree in technology, engineering, or related field\n- Courses in mechanical drawing, shop mathematics, and machining practices\n- CMM programming experience\n- Prior experience in the CAM software of Esprit\nRelocation benefit provided? No\nCity Searcy\nState Arkansas", "date_new": "2012-02-22 18:58:08", "url": "http://find.eaton.jobs/xml/26680972/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Programming Technician - 1st Shift", "reqid": "49700BR", "state": "Arkansas", "state_short": "AR", "location": "Searcy, AR", "uid": 26680972}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle CNC Machinist\nBusiness Function Production\nEmployee category Regular\nAutoReqId 49048BR\nDivision Fuel Systems Division\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a CNC Machinist.\n\nThe CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets.\n\nKey responsibilities\n\n\u2022 Production of Cell specific components whilst adhering to strict guidelines\n\u2022 Set & Operate CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer\n\u2022 Pre-set and load tooling as appropriate into CNC machine\n\u2022 Check accuracy of first off\n\u2022 Check accuracy of parts using appropriate measurement tools\n\u2022 Take corrective action to rectify errors by offset adjustment on CNC machine\n\u2022 Undertake inspection process of other team members work when required\n\u2022 Obtain & Maintain A Stamp\u201d Approval status for machines and processes\n\u2022 Assist in De-Burring as required\n\u2022 Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events\n\u2022 Work on own initiatives and resolve any issues or problems to company specific procedures\n\nExperience Required:\n\n\u2022 Previous experience in setting and operating CNC Turning together with Milling and Mill/Turning Machines (this is advantageous to have both qualities)\n\u2022 Conversant with Machine Shop Measurement Techniques\u2013 using appropriate measurement equipment e.g. Digital calipers, micrometer use of thread checking equipment\n\u2022 Ability to Read and interpret Engineering Drawings, with a practical working understanding of Geometric Tolerancing (use of geometric symbols).\n\u2022 Full training will be provided\n\u2022 Aerospace knowledge is beneficial\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications / Experience Required:\n\u2022 GCSE\u2019s or equivalent preferred\n\u2022 Experience in a similar role is advantageous\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-02-07 23:08:51", "url": "http://find.eaton.jobs/xml/26381981/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "CNC Machinist", "reqid": "49048BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 26381981}, {"country_short": "GBR", "city": "South Molton", "description": "External Job\nTitle CNC Machinist\nAutoReqId 49048BR\nBusiness Function Production\nDivision Fuel Systems Division\nEmployee category Regular\nTravel Required No Travel\nJob Description Eaton Aerospace Ltd, a multi-billion dollar US-owned company, specialises in the design and manufacture of a wide range of mechanical and electro-mechanical products for the international aerospace industry.\n\nThe South Molton plant, based in North Devon, currently have an exciting opportunity for a CNC Machinist.\n\nThe CNC Machinist is accountable for setting and operating CNC turning and milling machines in order to produce parts to engineering technical drawings following set operating procedures. The ideal candidate will have the knowledge to review parts to ensure they comply with measurements on drawings and take remedial action as appropriate by adjusting offsets.\n\nKey responsibilities\n\n\u2022 Production of Cell specific components whilst adhering to strict guidelines\n\u2022 Set & Operate CNC machine to specific programme as per part number and work instruction sheet via utilisation of the DNC link (direct numerical control) on computer\n\u2022 Pre-set and load tooling as appropriate into CNC machine\n\u2022 Check accuracy of first off\n\u2022 Check accuracy of parts using appropriate measurement tools\n\u2022 Take corrective action to rectify errors by offset adjustment on CNC machine\n\u2022 Undertake inspection process of other team members work when required\n\u2022 Obtain & Maintain A Stamp\u201d Approval status for machines and processes\n\u2022 Assist in De-Burring as required\n\u2022 Knowledge and application of lean principles/tools/5 S/seven wastes, participating in Kaizen events\n\u2022 Work on own initiatives and resolve any issues or problems to company specific procedures\n\nExperience Required:\n\n\u2022 Previous experience in setting and operating CNC Turning together with Milling and Mill/Turning Machines (this is advantageous to have both qualities)\n\u2022 Conversant with Machine Shop Measurement Techniques\u2013 using appropriate measurement equipment e.g. Digital calipers, micrometer use of thread checking equipment\n\u2022 Ability to Read and interpret Engineering Drawings, with a practical working understanding of Geometric Tolerancing (use of geometric symbols).\n\u2022 Full training will be provided\n\u2022 Aerospace knowledge is beneficial\n\nNote: This role is subject to International Traffic in Arms Regulations (ITAR) and therefore there may be restrictions on who can work on this project.\nBasic Qualifications (Including Educational Requirements) Qualifications / Experience Required:\n\u2022 GCSE\u2019s or equivalent preferred\n\u2022 Experience in a similar role is advantageous\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry United Kingdom\nCity South Molton\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-02-07 22:28:24", "url": "http://find.eaton.jobs/xml/26380890/job", "country": "United Kingdom", "company": "Eaton Corporation", "title": "CNC Machinist", "reqid": "49048BR", "state": null, "state_short": null, "location": "South Molton, GBR", "uid": 26380890}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Project Engineer\nAutoReqId 48961BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Sr. Project Engineer. This position will lead an engineering team performing conceptual design, development and qualification of hydraulic valves, actuators and reservoirs for various commercial and military applications, including nose wheel steering, landing gear control, general aircraft hydraulic systems. Successful candidates will be able to independently lead a major project from initial design conception through the design phases, up to and including qualification and transition to production. The position requires the use of six sigma tools to ensure project success and may involve use of some earned value tools.\n\nDuties and Responsbilities:\n\n1. Lead teams engaged in any or all of the activities below. Provide mentorship, technical advice, and oversight to component design engineers locally and at other Eaton or vendor sites, locally and globally.\n2. Estimate labor/material budgets for new and scope change proposals. Establish design-to-cost (DTC) models and track configurations to DTC compliance per company practices.\n3. Establish technical work breakdown structures and budget estimates in conjunction with Program Management and Engineering Resource Managers. Manage progress to engineering task plans and schedules through the project, including variance analysis of earned value metrics as appropriate.\n4. Develop appropriate allocations, and design margin strategy, of system requirements to component attributes including derived characteristics. Assist in review and refinement of system or component specifications. Develop and maintain specification compliance data throughout the product development life cycle.\n5. Lead component development by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other engineers. Apply engineering knowledge and 3D modeling skills to develop designs compliant with internal and external standard practices.\n6. Develop, execute, and manage a risk management plan including risk mitigation tasks. Solve technical problems with products and designs; drive teams to efficiently and effectively execute problem solving assignments.\n7. Lead the team in utilizing six sigma tools (especially design for six sigma) to ensure that critical to quality measures are defined and tracked through the design and validation process. Conduct reviews to ensure that design variability and process capability are understood and defined in design documentation.\n8. Prepare technical presentations for internal and external customers, including preliminary/critical design reviews and other reviews as required.\n9. Participate in and lead meetings with the customer and other engineers, distributing the results to the development team and coordinating actions as necessary. Ensure information flow within the local Eaton team, with other Eaton sites (locally and globally), and contractor teams as appropriate to facilitate work flow, efficiency and quality of work results delivered to the customer\n10. Prepare or approve SDRL documents, including analysis reports, certification reports etc.\n11. Participate in the component/system qualification process in conjunction with the Eaton and outside test laboratories.\n12. Perform other duties as assigned.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Bachelor of Science Degree in Engineering from an accredited institution is required.\n- Minimum 7 years of mechanical engineering experience in an Aerospace, Automotive, or Medical Device environment.\n- This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\nPosition Criteria:\n\nAbility to understand system and customer specifications, layouts and functions, and the interfaces to other platform systems.\n\nFamiliarity with manufacturing and ability to work closely with manufacturing engineers to make use of process capability data in design.\n\nGood written, oral and presentation skills, leadership qualities and the ability to work well with customers and development team members.\n\nPreferred Criteria:\n\n- Minimum 5 years experience with aircraft component development (experience with valves, landing gear, and hydraulic components highly desired) and 3-5 years experience with project management and work in a cross-functional product team (leadership experience in this environment desired).\n\n- Experience with CATIA/ProE, Matlab/Simulink, and stress analysis tools preferred.\n\n- Experience with tools used for requirements flow-down / traceability (e.g. DOORS) preferred.\n\n- Experience with earned values tools preferred\n\n- Experience with six sigma tools ( e.g. DFMEA, QFD, Crystal Ball simulation, etc.) preferred\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 7 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-02-01 21:23:59", "url": "http://find.eaton.jobs/xml/26251159/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Project Engineer", "reqid": "48961BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 26251159}, {"country_short": "FRA", "city": "Serres-Castet", "description": "External Job\nTitle Bender\nAutoReqId 48033BR\nBusiness Function Production\nDivision Aerospace Division\nEmployee category Regular\nExperience\nLevel 1-3 years\nTravel Required No Travel\nJob Description Bender at Rigid Pipe Cell\nBasic Qualifications (Including Educational Requirements) Less than 2 years vocational (CAP degree)\n2 years of Bending experience min.\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry France\nCity Serres-Castet\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-01-31 22:31:14", "url": "http://find.eaton.jobs/xml/26226143/job", "country": "France", "company": "Eaton Corporation", "title": "Bender", "reqid": "48033BR", "state": null, "state_short": null, "location": "Serres-Castet, FRA", "uid": 26226143}, {"country_short": "FRA", "city": "Serres-Castet", "description": "External Job\nTitle Assembler\nAutoReqId 48032BR\nBusiness Function Production\nDivision Aerospace Division\nEmployee category Regular\nExperience\nLevel 1-3 years\nTravel Required No Travel\nJob Description Assembler at Hose Assembly Cell\nBasic Qualifications (Including Educational Requirements) Less than 2 years vocational (CAP degree)\nAvg 2 years experience as Hose Assembler as a temporary contract in EATON\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry France\nCity Serres-Castet\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-01-31 22:30:59", "url": "http://find.eaton.jobs/xml/26226141/job", "country": "France", "company": "Eaton Corporation", "title": "Assembler", "reqid": "48032BR", "state": null, "state_short": null, "location": "Serres-Castet, FRA", "uid": 26226141}, {"country_short": "FRA", "city": "Serres-Castet", "description": "External Job\nTitle Assembler\nBusiness Function Production\nEmployee category Regular\nAutoReqId 48032BR\nDivision Aerospace Division\nExperience\nLevel 1-3 years\nTravel Required No Travel\nJob Description Assembler at Hose Assembly Cell\nBasic Qualifications (Including Educational Requirements) Less than 2 years vocational (CAP degree)\nAvg 2 years experience as Hose Assembler as a temporary contract in EATON\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry France\nCity Serres-Castet\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-01-31 18:22:19", "url": "http://find.eaton.jobs/xml/26214924/job", "country": "France", "company": "Eaton Corporation", "title": "Assembler", "reqid": "48032BR", "state": null, "state_short": null, "location": "Serres-Castet, FRA", "uid": 26214924}, {"country_short": "FRA", "city": "Serres-Castet", "description": "External Job\nTitle Bender\nBusiness Function Production\nEmployee category Regular\nAutoReqId 48033BR\nDivision Aerospace Division\nExperience\nLevel 1-3 years\nTravel Required No Travel\nJob Description Bender at Rigid Pipe Cell\nBasic Qualifications (Including Educational Requirements) Less than 2 years vocational (CAP degree)\n2 years of Bending experience min.\nRelocation benefit provided? No\nRegion Europe, Middle East, Africa\nCountry France\nCity Serres-Castet\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-01-31 18:19:35", "url": "http://find.eaton.jobs/xml/26214810/job", "country": "France", "company": "Eaton Corporation", "title": "Bender", "reqid": "48033BR", "state": null, "state_short": null, "location": "Serres-Castet, FRA", "uid": 26214810}, {"country_short": "USA", "city": "Fort Worth", "description": "External Job\nTitle Lead Hydraulic Systems Engineer\nAutoReqId 48649BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace's Hydraulic Systems Division has an opening for a Hydraulic Systems Engineer. This position could be located in Fort Worth, Texas; Los Angeles, California; or Jackson, Mississippi.\n\nThis position requires knowledge and experience of system engineering including design and integration of hydraulic power generation, distribution, and actuation sub systems architectures for aircraft applications. Skills involve recognizing customer performance needs along with meeting certification requirements for various global commercial and military aerospace applications.\nSuccessful candidates will be able to independently lead an engineering team for a major project from initial conception through each of the design and development phases, up to and including aircraft flight certification.\n\nWork assignments may be varied and challenging and involve complete responsibility of the design and qualification of a hydraulic system, as well as oversight into the responsibilities of less senior engineers. It is expected that this engineer would need minimal guidance when dealing with technical issues, and they must be self-directed as regards to the ownership and management of their tasks and schedules. Originality and ingenuity are required.\n\nOver 50% travel may be required. The individual must be able to temporarily relocate to any global customer location for extended periods of three to six months.\n\nDUTIES & RESPONSIBILITIES:\n\n. Ability to define a hydraulic system architecture including redundancy / backup systems through trade studies that optimize system reliability, weight and cost. Implied with this skill is adequate knowledge of the following with the ability to adeptly discuss these subjects and their implications with customers:\n- FAA regulations (including Advisory Circulars) and SAE Technical Standards that influence hydraulic system requirements and capabilities;\n- Fault Tree and System Safety Analysis;\n- Environmental requirements as they apply to military and commercial applications\n2. Ability to understand aircraft hydraulic system level specifications, aircraft system layouts, interfaces with other aircraft systems.  Assist the customer with the development of system level specifications.\n3. Ability to decompose and flow down aircraft system level requirements to both subsystem and component suppliers through specifications and requirements documents.\n4. Lead system design through a phase gate approval process including formal gate reviews to senior leadership and customers.\n5. Ability to define, coordinate and review system model / simulation results with analysts and identify system risks and hydraulic performance effects such as dynamic performance transients, pressure drop and thermal performance.\n6. Thorough understanding of hydraulic component performance, such as impulse and endurance requirements including industry standards (such as DO-160 and SAE-AS-5440) and ability to derive component requirements from the vehicle duty cycle.\n7. Prepare or approve system documents, e.g. analysis reports, Qualification and Certification reports etc.\n8. Participate in the development of test and certification documents for a given program.\n9. Coordinate activities with Program Management, including planning, organizing, budgeting, labor estimating, program timing.\n10. Establish technical work breakdown structures in coordination with Program Management.\n11. Participate in the risk management process by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other systems partners.\n12. Prepare technical presentations and lead meetings with the customer and other systems partners, distributing the results to the development team and coordinating actions as necessary.\n13. Lead teams engaged in the above activities.\n\nPREFERRED QUALIFICATIONS\n\nExcellent verbal and written communication skills are required for interfacing with customers, suppliers, and team members.\nThe selected applicant should be a fast-thinking problem solver and should thrive in a dynamic environment.\n\n1. Minimum 3 years experience with project management and work in a cross-functional product team\n\n2. Experience with tools used for requirements flow-down / traceability (e.g. DOORS, etc.)\n\n3. Good written, oral and presentation skills, leadership qualities and the ability to work well with customers and peers\n\n4. Program Management skills, customer interface experience, and successful new product introduction experience\n\n5. Lean and design for six sigma experience\n\n6. Experience with geographically distributed teams and use of contracted resources\n\n7. Demonstrated leadership skills, experienced with design processes, demonstrated results in managing programs within budgets and on time\n\n8. Masters degree\nBasic Qualifications (Including Educational Requirements) Bachelor of Science Degree in Engineering from an accredited institution\n\nMinimum 7 years experience working with hydraulic systems or subsystems\n\nMust be able to work in the U.S. on an on-going basis without sponsorship\nRegion North America - US/Puerto Rico\nCountry United States\nState Texas\nCity Fort Worth\nEmployee category Regular\nExperience\nLevel Minimum 7 Years\nTravel Required Up to 50 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-01-24 22:29:32", "url": "http://find.eaton.jobs/xml/26091240/job", "country": "United States", "company": "Eaton Corporation", "title": "Lead Hydraulic Systems Engineer", "reqid": "48649BR", "state": "Texas", "state_short": "TX", "location": "Fort Worth, TX", "uid": 26091240}, {"country_short": "MEX", "city": "Reynosa", "description": "External Job\nTitle Production Supervisor\nAutoReqId 45267BR\nBusiness Function Production\nDivision Hydraulics Division\nEmployee category Regular\nExperience\nLevel 3-5 years\nTravel Required No Travel\nJob Description Responsible to lead and manage a production team to achieve plant and production goals to meet customer on time delivery schedule.\nManage manpower resources to achieve optimal productivity and product quality.\nImplement processes to reduce scrap and also ensure the availability of raw materials required for production.\nSupport and participate actively in cost out activities.\nEnsure all regulatory standards and company policies are understood, supported and followed in the shopfloor and enforce strict adherence to safety absolutes to ensure a safe working environment.\nDrive continuous improvement in production operation through application of ELS tools and leading kaizen teams.\nPrepare and evaluate reports pertaining to production operation.\nBasic Qualifications (Including Educational Requirements) Diploma in manufacturing discipline / business studies.(Experience might replace this requirement)\n\nMinimum 3 years in a supervisory position in a manufacturing environment.\n\nKnowledge of Lean Manufacturing.\n\nProficient in MS Office Applications.\n\nKnowledge of MFG-Pro is an advantage.\n\nWillingness to work on 12 hours shift.\nRelocation benefit provided? No\nRegion Latin America\nCountry Mexico\nCity Reynosa\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-01-12 11:45:30", "url": "http://find.eaton.jobs/xml/25851219/job", "country": "Mexico", "company": "Eaton Corporation", "title": "Production Supervisor", "reqid": "45267BR", "state": null, "state_short": null, "location": "Reynosa, MEX", "uid": 25851219}, {"country_short": "MEX", "city": "Reynosa", "description": "External Job\nTitle Production Supervisor\nBusiness Function Production\nEmployee category Regular\nAutoReqId 45267BR\nDivision Hydraulics Division\nExperience\nLevel 3-5 years\nTravel Required No Travel\nJob Description Responsible to lead and manage a production team to achieve plant and production goals to meet customer on time delivery schedule.\nManage manpower resources to achieve optimal productivity and product quality.\nImplement processes to reduce scrap and also ensure the availability of raw materials required for production.\nSupport and participate actively in cost out activities.\nEnsure all regulatory standards and company policies are understood, supported and followed in the shopfloor and enforce strict adherence to safety absolutes to ensure a safe working environment.\nDrive continuous improvement in production operation through application of ELS tools and leading kaizen teams.\nPrepare and evaluate reports pertaining to production operation.\nBasic Qualifications (Including Educational Requirements) Diploma in manufacturing discipline / business studies.(Experience might replace this requirement)\n\nMinimum 3 years in a supervisory position in a manufacturing environment.\n\nKnowledge of Lean Manufacturing.\n\nProficient in MS Office Applications.\n\nKnowledge of MFG-Pro is an advantage.\n\nWillingness to work on 12 hours shift.\nRelocation benefit provided? No\nRegion Latin America\nCountry Mexico\nCity Reynosa\n\n   \n\n\n\nIndex Monitor", "date_new": "2012-01-12 11:43:17", "url": "http://find.eaton.jobs/xml/25850983/job", "country": "Mexico", "company": "Eaton Corporation", "title": "Production Supervisor", "reqid": "45267BR", "state": null, "state_short": null, "location": "Reynosa, MEX", "uid": 25850983}, {"country_short": "USA", "city": "Williamsport", "description": "External Job\nTitle Extrusion Operator\nAutoReqId 47603BR\nDivision Fluid Filtration Division\nBusiness Function Production\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation located in Williamsport, Md has an opening for Extrusion Operator to perform the following: Set-up and control extrusion process to ensure proper production, rate, and yields. Be able to follow instructions from production order and team leader. Weigh and label containers as instructed. Stack containers as requested for Shipping Department. Perform SPC and statistical analysis as required. Enter data into SPC computers. Clean out mixes and grinder as instructed. Operate a forklift. Will perform other related duties as required.\nBasic Qualifications (Including Educational Requirements) Eaton Corporation located in Williamsport, Md has an opening for Extrusion Operator to perform the following: Set-up and control extrusion process to ensure proper production, rate, and yields. Be able to follow instructions from production order and team leader. Weigh and label containers as instructed. Stack containers as requested for Shipping Department. Perform SPC and statistical analysis as required. Enter data into SPC computers. Clean out mixes and grinder as instructed. Operate a forklift. Will perform other related duties as required.\nRelocation benefit provided? No\nCity Williamsport\nState Maryland", "date_new": "2012-01-06 16:37:43", "url": "http://find.eaton.jobs/xml/25734396/job", "country": "United States", "company": "Eaton Corporation", "title": "Extrusion Operator", "reqid": "47603BR", "state": "Maryland", "state_short": "MD", "location": "Williamsport, MD", "uid": 25734396}, {"country_short": "USA", "city": "Williamsport", "description": "External Job\nTitle Extrusion Operator\nAutoReqId 47603BR\nBusiness Function Production\nDivision Fluid Filtration Division\nJob Description Eaton Corporation located in Williamsport, Md has an opening for Extrusion Operator to perform the following: Set-up and control extrusion process to ensure proper production, rate, and yields. Be able to follow instructions from production order and team leader. Weigh and label containers as instructed. Stack containers as requested for Shipping Department. Perform SPC and statistical analysis as required. Enter data into SPC computers. Clean out mixes and grinder as instructed. Operate a forklift. Will perform other related duties as required.\nBasic Qualifications (Including Educational Requirements) Eaton Corporation located in Williamsport, Md has an opening for Extrusion Operator to perform the following: Set-up and control extrusion process to ensure proper production, rate, and yields. Be able to follow instructions from production order and team leader. Weigh and label containers as instructed. Stack containers as requested for Shipping Department. Perform SPC and statistical analysis as required. Enter data into SPC computers. Clean out mixes and grinder as instructed. Operate a forklift. Will perform other related duties as required.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Williamsport\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-01-06 16:28:30", "url": "http://find.eaton.jobs/xml/25734365/job", "country": "United States", "company": "Eaton Corporation", "title": "Extrusion Operator", "reqid": "47603BR", "state": "Maryland", "state_short": "MD", "location": "Williamsport, MD", "uid": 25734365}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Quality Inspector-Complex Inspections\nAutoReqId 48076BR\nBusiness Function Production\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Quality Inspector. This position reports to the Quality Inspection Lead or designated authority. Responsible internally for performing dimensional inspections on hydraulic, pneumatic, electric and mechanical component parts, assemblies and sub assemblies as required. The Quality Inspector is responsible for witnessing or performing the Source Inspection (same as above) at our suppliers, when required.\nSupport Supplier Quality Engineering as required.\n\nDUTIES AND RESPONSIBILITIES:\n\n\u2022 Perform dimensional inspection on complex machined components and tooling.\n\n\u2022 Operate Coordinate Measuring Machines during the performance of inspections (or have a strong working knowledge of CMM capability).\n\n\u2022 Work from surface plates using complex inspection layout equipment.\n\n\u2022 Perform both in-process and final first article inspections per AS9102\n\n\u2022 Be responsible for review and acceptance of paperwork and documentation used in the acceptance of product.\n\n\u2022 Initiate discrepancy reports when product is found nonconforming.\n\n\nSupplier activity\n\n\u2022 Witness and/ or Perform dimensional inspection on complex machined components and tooling at suppliers (Source Inspection), as required.\n\u2022 Sign-off product as acceptable or alert of discrepancies at Eaton suppliers.\n\u2022 Conduct investigation audits relating to corrective actions, investigations as directed by Supplier Quality Engineering (SQE).\n\u2022 Act as a liaison for SQE to communicate and investigate supplier issues.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School diploma required.\n\nMinimum of five years experience in First Article Inspection per AS9102 of highly complex, close tolerance aerospace products.\n\nMust have a valid CA drivers license.\n\nThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\nAt this time, relocation assistance is not available for this position. Only candidates in the immediate geographic area (50 mile radius) will be considered.\n\n\nPosition Criteria:\n\nBackground in surface plate layout and use of inspection equipments associated with product inspection.\n\nPossess a good understanding of Standards, Drawing Interpretation and Geometric Dimensioning and Tolerancing per ANSI Y14.5\n\n\nPreferred Criteria:\n\nASQC Inspection Certification a plus.\n\nKnowledge of Military Specifications associated with the acceptance of materials or special processing (NADCAP).\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2011-12-15 19:18:40", "url": "http://find.eaton.jobs/xml/25384766/job", "country": "United States", "company": "Eaton Corporation", "title": "Quality Inspector-Complex Inspections", "reqid": "48076BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 25384766}]