[{"country_short": "USA", "city": "Baltimore", "description": "External Job\nTitle Co-op - Field Service Engineer - Baltimore, MD\nAutoReqId 52054BR\nBusiness Function Development Programs\nDivision Electrical Engineering Services & Systems\nJob Description Eaton Corporation has an opening for Co-op Field Service Engineer in Baltimore, MD.\n\nThe primary responsibilities for this position include:\nWorking with an experienced field service technician, to provide field service engineering and technical assistance for customers in areas of installation, start up, maintenance, and repair of electrical distribution and power protection equipment.\n\nResponsibilities include:\n\u2022 Perform all work at a high quality level and maintain good customer relations\n\u2022 Provide detailed and quality reports to customers covering the scope of the work provided\n\u2022 Manage paperwork and office procedures as required\n\u2022 Maintain all test and safety equipment in good working order\n\nPlease note that relocation is not included with this position. Only candidates within the local geographic area will be considered.\nBasic Qualifications (Including Educational Requirements) Must be currently enrolled in an electrical engineering program at an accredited institution.\nMust be authorized to work in the US without company sponsorship.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Baltimore\nEmployee category Intern/Co-Op\nExperience\nLevel No Minimum Experience Required\nTravel Required Up to 25 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-18 20:12:53", "url": "http://find.eaton.jobs/xml/28801562/job", "country": "United States", "company": "Eaton Corporation", "title": "Co-op - Field Service Engineer - Baltimore, MD", "reqid": "52054BR", "state": "Maryland", "state_short": "MD", "location": "Baltimore, MD", "uid": 28801562}, {"country_short": "USA", "city": "Baltimore", "description": "External Job\nTitle Service Sales Engineer - Baltimore, MD\nAutoReqId 52081BR\nBusiness Function Marketing and Sales\nDivision North American Sales\nJob Description Eaton Corporation has an opening for a Lead Service Sales Engineer.\n\nPosition will be located in Baltimore, MD.\n\nThe position\u2019s primary objective is to optimize sales volume, product mix and profit margin.\n\nManage all aspects of the customer relationship, providing sales and technical assistance with distributors, customers, end users, specifiers, and Eaton\u2019s Electrical Sector employees. Develop a proven record of achieving assigned sales quota. Develop and implement sales plans and be aware of and responsive to market conditions and competitive activities. Communicate such information to product divisions. Maintain a cooperative and credible working relationship with other company employees to assure customer satisfaction. Manage expense allowances and submit expense reports in a timely manner. Prepare and present bids and quotations to customers using company price and delivery guidelines, and use sound business judgment to enhance margins. Support total quality efforts by providing timely and accurate information for order entry, elevating quality issues to attention of management. Ensure that accurate information flows to and from customers. Implement new product programs as needed. Collect, analyze, and utilize market intelligence regarding competitive products, customer needs, preferences, and buying habits. Provide necessary reports requested by management in a timely manner.\n\nPlatforms include Contracts & Support services, Engineering & Consulting, and Turnkey & Modernization services.\n\nPosition Criteria:\nStrong work ethic, interpersonal skills, competitiveness, and willingness to learn\nAbility to build relationships.\nElectrical power distribution knowledge.\n\nPreferred Qualifications:\nBS/BA degree required from an accredited University.\nElectrical power distribution service sales experience\nElectrical field technician experience\nBasic Qualifications (Including Educational Requirements) Minimum 5 years of progressive electrical industry sales engineering experience or minimum of 5 years electrical power distribution field technician experience (or a combination of both) required.\n\n\nAuthorized to work in the US without Company Sponsorship\n\nValid Drivers License with no restrictions\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Baltimore\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 25 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-05-18 20:09:25", "url": "http://find.eaton.jobs/xml/28801338/job", "country": "United States", "company": "Eaton Corporation", "title": "Service Sales Engineer - Baltimore, MD", "reqid": "52081BR", "state": "Maryland", "state_short": "MD", "location": "Baltimore, MD", "uid": 28801338}, {"country_short": "USA", "city": "Baltimore", "description": "External Job\nTitle Co-op - Field Service Engineer - Baltimore, MD\nAutoReqId 52054BR\nDivision Electrical Engineering Services & Systems\nBusiness Function Development Programs\nEmployee category Intern/Co-Op\nExperience\nLevel No Minimum Experience Required\nTravel Required Up to 25 percent\nJob Description Eaton Corporation has an opening for Co-op Field Service Engineer in Baltimore, MD.\n\nThe primary responsibilities for this position include:\nWorking with an experienced field service technician, to provide field service engineering and technical assistance for customers in areas of installation, start up, maintenance, and repair of electrical distribution and power protection equipment.\n\nResponsibilities include:\n\u2022 Perform all work at a high quality level and maintain good customer relations\n\u2022 Provide detailed and quality reports to customers covering the scope of the work provided\n\u2022 Manage paperwork and office procedures as required\n\u2022 Maintain all test and safety equipment in good working order\n\nPlease note that relocation is not included with this position. Only candidates within the local geographic area will be considered.\nBasic Qualifications (Including Educational Requirements) Must be currently enrolled in an electrical engineering program at an accredited institution.\nMust be authorized to work in the US without company sponsorship.\nRelocation benefit provided? No\nCity Baltimore\nState Maryland", "date_new": "2012-05-18 20:05:56", "url": "http://find.eaton.jobs/xml/28801136/job", "country": "United States", "company": "Eaton Corporation", "title": "Co-op - Field Service Engineer - Baltimore, MD", "reqid": "52054BR", "state": "Maryland", "state_short": "MD", "location": "Baltimore, MD", "uid": 28801136}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Flanges CNC Operator - 2nd Shift\nAutoReqId 51567BR\nDivision Conveyance Systems Division\nBusiness Function Manufacturing\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Flanges CNC Operator on 2nd shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Must be able to set up and operate multiple machines to perform a sequence of operations such as turn, drill, and bore a variety of metal components.\n- Fully understand production routers which include material types, lot numbers and quality, router sign-off procedures, cutter verification stamps and SPC data entry.\n- Identify materials and tooling and inserts for specific operations.\n- Be able to perform basic setup.\n- Be able to set up gauges.\n- Use all machine commands and controls.\n- Understand and maintain UPL boards data.\n- Work in different cells in the factory.\n- Maintain cell charts.\n- Load program from DNC to machines.\n- Must be able to read blueprints and in accordance with standard shop practices.\n- Ensure accuracy of program and the quality of parts through visual inspection and physical\nmeasurement.\n- Ability to safely and accurately use a wide variety of hand tools and gages.\n- Work in accordance with general safety rules and practices.\n- Keeps immediate work area clean and free from hazards.\n- Responsible for finished parts conformity to print or specification.\n- Perform other related duties as assigned.\n\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes earplugs, safety glasses & steel-toed shoes.)\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Must be prequalified to work on defense projects, per the state department ITAR regulations.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Qualifications:\n- One to three years manufacturing experience. CNC/Lathe experience desirable, but not required.\nRelocation benefit provided? No\nCity Beltsville\nState Maryland", "date_new": "2012-05-11 20:30:41", "url": "http://find.eaton.jobs/xml/28641103/job", "country": "United States", "company": "Eaton Corporation", "title": "Flanges CNC Operator - 2nd Shift", "reqid": "51567BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 28641103}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Couplings CNC Operator - 2nd Shift\nAutoReqId 51568BR\nDivision Conveyance Systems Division\nBusiness Function Manufacturing\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Couplings CNC Operator on 2nd shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Must be able to set up and operate multiple machines to perform a sequence of operations such as turn, drill, and bore a variety of metal components.\n- Fully understand production routers which include material types, lot numbers and quality, router sign-off procedures, cutter verification stamps and SPC data entry.\n- Identify materials and tooling and inserts for specific operations.\n- Be able to perform basic setup.\n- Be able to set up gauges.\n- Use all machine commands and controls.\n- Understand and maintain UPL boards data.\n- Work in different cells in the factory.\n- Maintain cell charts.\n- Load program from DNC to machines.\n- Must be able to read blueprints and in accordance with standard shop practices.\n- Ensure accuracy of program and the quality of parts through visual inspection and physical\nmeasurement.\n- Ability to safely and accurately use a wide variety of hand tools and gages.\n- Work in accordance with general safety rules and practices.\n- Keeps immediate work area clean and free from hazards.\n- Responsible for finished parts conformity to print or specification.\n- Perform other related duties as assigned.\n\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes earplugs, safety glasses & steel-toed shoes.)\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Must be prequalified to work on defense projects, per the state department ITAR regulations.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Qualifications:\n- One to three years manufacturing experience. CNC/Lathe experience desirable, but not required.\nRelocation benefit provided? No\nCity Beltsville\nState Maryland", "date_new": "2012-05-11 20:29:56", "url": "http://find.eaton.jobs/xml/28641075/job", "country": "United States", "company": "Eaton Corporation", "title": "Couplings CNC Operator - 2nd Shift", "reqid": "51568BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 28641075}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Couplings CNC Operator - 2nd Shift\nAutoReqId 51568BR\nBusiness Function Manufacturing\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Couplings CNC Operator on 2nd shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Must be able to set up and operate multiple machines to perform a sequence of operations such as turn, drill, and bore a variety of metal components.\n- Fully understand production routers which include material types, lot numbers and quality, router sign-off procedures, cutter verification stamps and SPC data entry.\n- Identify materials and tooling and inserts for specific operations.\n- Be able to perform basic setup.\n- Be able to set up gauges.\n- Use all machine commands and controls.\n- Understand and maintain UPL boards data.\n- Work in different cells in the factory.\n- Maintain cell charts.\n- Load program from DNC to machines.\n- Must be able to read blueprints and in accordance with standard shop practices.\n- Ensure accuracy of program and the quality of parts through visual inspection and physical\nmeasurement.\n- Ability to safely and accurately use a wide variety of hand tools and gages.\n- Work in accordance with general safety rules and practices.\n- Keeps immediate work area clean and free from hazards.\n- Responsible for finished parts conformity to print or specification.\n- Perform other related duties as assigned.\n\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes earplugs, safety glasses & steel-toed shoes.)\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Must be prequalified to work on defense projects, per the state department ITAR regulations.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Qualifications:\n- One to three years manufacturing experience. CNC/Lathe experience desirable, but not required.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-11 20:26:11", "url": "http://find.eaton.jobs/xml/28640950/job", "country": "United States", "company": "Eaton Corporation", "title": "Couplings CNC Operator - 2nd Shift", "reqid": "51568BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 28640950}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Flanges CNC Operator - 2nd Shift\nAutoReqId 51567BR\nBusiness Function Manufacturing\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Flanges CNC Operator on 2nd shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Must be able to set up and operate multiple machines to perform a sequence of operations such as turn, drill, and bore a variety of metal components.\n- Fully understand production routers which include material types, lot numbers and quality, router sign-off procedures, cutter verification stamps and SPC data entry.\n- Identify materials and tooling and inserts for specific operations.\n- Be able to perform basic setup.\n- Be able to set up gauges.\n- Use all machine commands and controls.\n- Understand and maintain UPL boards data.\n- Work in different cells in the factory.\n- Maintain cell charts.\n- Load program from DNC to machines.\n- Must be able to read blueprints and in accordance with standard shop practices.\n- Ensure accuracy of program and the quality of parts through visual inspection and physical\nmeasurement.\n- Ability to safely and accurately use a wide variety of hand tools and gages.\n- Work in accordance with general safety rules and practices.\n- Keeps immediate work area clean and free from hazards.\n- Responsible for finished parts conformity to print or specification.\n- Perform other related duties as assigned.\n\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes earplugs, safety glasses & steel-toed shoes.)\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Must be prequalified to work on defense projects, per the state department ITAR regulations.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Qualifications:\n- One to three years manufacturing experience. CNC/Lathe experience desirable, but not required.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-11 20:26:04", "url": "http://find.eaton.jobs/xml/28640946/job", "country": "United States", "company": "Eaton Corporation", "title": "Flanges CNC Operator - 2nd Shift", "reqid": "51567BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 28640946}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Machined Components Value Stream Manager\nAutoReqId 50330BR\nBusiness Function Operations\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Machined Components Value Stream Manager. This position is responsible for overall management of a manufacturing cell, focused factory, or workcenter. Overall responsibility for leading manufacturing team in achieving production schedule, product quality, product cost, and employee safety goals. Coordinates with all functional and service groups to meet customer requirements. Drives performance to achieve or exceed financial plans and strategic goals. Leverages resources and motivates personnel to create high performance culture. Primary responsibilities include:\n\nEssential Functions:\n\nA. Manage and directs all manufacturing activities to ensure completion of customer requirements\nB. Assess performance indicators, and takes appropriate actions, to ensure schedule, cost, and quality goals are met\nC. Ensure required documentation and/or system transactions are executed to meet customer, manufacturing system, and financial reporting requirements\nD. Assure policies, procedures, and other documentation are followed to ensure consistent and compliant manufactured product\nE. Provide leadership and commitment in support of continuing improvements in quality, productivity and delivery performance\nF. Support product design organization through new product introduction phase to ensure customer manufacturing delivery times are met\nG. Assure that Environmental, Health, and Safety issues are addressed considering local regulations, Eaton policy, and good corporate citizenship\nH. Evaluate operational performance of the group in order to facilitate performance management, merit promotions, job transfers, dismissals, commendations, etc.\nI. Develop budgets and resource plans, and monitors performance, to achieve product delivery and cost requirements\nJ. Develop budgets and resource plans, and monitors performance, to achieve product delivery and financial requirements\nK. Coordinate and assists with business initiatives, participating on teams in order to drive best practices across enterprise.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\n\u2022 Bachelor\u2019s degree from an accredited institution is required.\n\u2022 Minimum 7 years of Manufacturing/Operations experience is required.\n\u2022 Minimum 5 years of Supervisory/Managerial experience is required.\n\u2022 Must be prequalified to work on defense projects, per the state department ITAR regulations.\n\nPosition Criteria:\n\n\u2022 Knowledge of materials planning systems (MRP/ERP) requirements and order generation process logic\n\u2022 Understanding of Supply Chain Management operational concepts surrounding production planning, scheduling, purchasing, inventory control, logistics, stockroom operations, and shipping/receiving\n\u2022 Knowledge of Lean Manufacturing and Process Variation Reduction (Six Sigma) concepts and tool sets as they relate to materials management\n\u2022 Thorough Understanding of manufacturing technologies and processes\n\u2022 Knowledge of financial concepts and techniques utilized to establish value propositions of operational changes:\n\u2022 Ability to direct and lead cross-functional process improvement teams\n\nPreferred Criteria:\n\n\u2022 Master's degree preferred\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 10+ Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-05-08 19:22:30", "url": "http://find.eaton.jobs/xml/28545740/job", "country": "United States", "company": "Eaton Corporation", "title": "Machined Components Value Stream Manager", "reqid": "50330BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 28545740}, {"country_short": "USA", "city": "Baltimore", "description": "External Job\nTitle Account Development Manager\nAutoReqId 51329BR\nBusiness Function Marketing and Sales\nDivision North American Sales\nJob Description The preferred location for this position will be located in Washington, DC or a centrally located metropolitan city in the U.S.\n\nThe primary function of this position is to effectively leverage and engage Eaton's enterprise wide resources to coordinate and grow sales of electrical products, services and PowerChain solutions at executive levels within the Federal Aviation Administration, General Services Administration and Veterans Administration.\n\nIndividual will engage dedicated government resources across the company and as required, promoting and developing key business relationships within the business decision making levels of Federal Aviation Administration, General Services Administration and Veterans Administration.\nWork interactively and interdependently through the Eaton enterprise to coordinate sales of products, services, and PowerChain solutions to the Federal Aviation Administration, General Services Administration and Veterans Administration. Drive the process to ensure detailed strategic and marketing plans are in place for these targeted organization incorporating field sales management as well as operations. Create, develop and drive opportunities for obtaining government contracts with these target customers. Be the center of excellence and resource for all Eaton Electrical Group Divisions and alliance partners as well as coordinate Eaton wide government initiatives with the Federal Aviation Administration, General Services Administration and Veterans Administration.\n\n\nPosition Criteria:\nExtensive network of relationships within the Federal Aviation Administration, General Services Administration and Veterans Administration.\nMechanical or electrical background.\nDemonstrated computer skills.\nKnowledge of Power Quality, Distribution and Control Products.\nStrong skills in communicating technical information to non-technical personnel, educating customers and presenting information to internal and external customers.\nDesire to develop Marketing, Strategic Planning and Sales Management skills.\nAbility to obtain a Government Security Clearance.\n\n\nPreferred Criteria:\nBS in Engineering\nMBA\nBasic Qualifications (Including Educational Requirements) -BS/BA degree from an accredited University.\n- Minimum of Ten (10) years experience in the Military or working for the Federal Government or selling to the Military/Federal Government.\n-Minimum of 1 year experience in electrical and/or industrial markets\n-Must possess the ability to obtain a government security clearance\n-Valid U.S. Driver's License\n-Authorized to work in the US without company sponsorship.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Baltimore\nEmployee category Regular\nExperience\nLevel Minimum 10+ Years\nTravel Required Up to 25 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-05-04 20:13:59", "url": "http://find.eaton.jobs/xml/28445369/job", "country": "United States", "company": "Eaton Corporation", "title": "Account Development Manager", "reqid": "51329BR", "state": "Maryland", "state_short": "MD", "location": "Baltimore, MD", "uid": 28445369}, {"country_short": "USA", "city": "Columbia", "description": "External Job\nTitle Field Based Project Engineer\nAutoReqId 50503BR\nBusiness Function Marketing and Sales\nDivision North American Sales\nJob Description Eaton Corporation\u2019s Electrical Sector has an immediate opening for a field-based Project Engineer located in Columbia, MD. An alternative location considered is Richmond, VA.\n\nThe primary responsibilities of this assignment will be to support Project Managers and enhance the value generated for customers. This is accomplished by managing technical information and customer relationships for major commercial construction and/or industrial projects. Technical responsibilities will include review of project specifications and contracts, review of order specifics prior to entry to insure technical accuracy, management of technical changes to the bill of material, coordination and interpretation of plant drawings, leveraging centralized resources for the creation of submittal packages, closure of warranty issues, review of operations and maintenance manuals, and other various technical responsibilities. The field-based project engineer will work independently on daily tasks, leverage centralized resources to manage documentation and only support field based project managed orders. This position will take direction from local Project Managers and report to a Regional Manager \u2013 Project Management.\n\nPosition Criteria:\n\u2022Demonstrated interpersonal and customer service skills.\n\u2022Computer skills, including: Adobe Acrobat, AutoCAD, Internet, Microsoft Office, and other product configuration tools.\n\u2022Must be able to work in a team environment and possess strong organizational skills.\n\u2022Demonstrated proficiency in providing proactive order support on complex project orders.\n\nPreferred qualifications:\n\u2022Electrical, Mechanical or Industrial Distribution engineering degree preferred.\n\u2022Prior sales, sales support or electrical industry experience preferred.\n\u2022Proficient in Tools and Applications required for job function (Bid Manager, Formatter, CQM, etc)preferred.\n\u2022Advanced technical aptitude, market channel knowledge, power distribution application expertise preferred.\n\u2022PE License preferred.\nBasic Qualifications (Including Educational Requirements) \u2022BS/BA Degree from an accredited school or minimum 10 years project/product experience in the electrical industry required.\n\u2022Minimum 3 years project/product experience in the electrical industry required.\n\u2022Legally authorized to work in the United States without company sponsorship.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Columbia, MD\nEmployee category Regular\nExperience\nLevel Minimum 3 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-04-11 20:23:47", "url": "http://find.eaton.jobs/xml/27819305/job", "country": "United States", "company": "Eaton Corporation", "title": "Field Based Project Engineer", "reqid": "50503BR", "state": "Maryland", "state_short": "MD", "location": "Columbia, MD", "uid": 27819305}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Test Engineer\nAutoReqId 50540BR\nDivision Conveyance Systems Division\nBusiness Function Engineering\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required Up to 10 percent\nJob Description Eaton Corporation located in Beltsville, MD is currently seeking a Test Engineer to join the team. The primary function of this role will be to test both prototype and production hardware to verify that it performs to the customer required specifications. The incumbent will study the specifications and examine the hardware. Determine what data is needed and then identify the actual test methods, materials, fixtures and equipment required. Schedule and perform tests; present data to the requester. Maintain responsibility for all engineering details associated with the testing performed at this facility and others as needed to fulfill customer obligations. Additionally, this team member will be responsible for:\n\nA. In-house expert on all test equipment, procedures, government and customer specifications.\nB. Design and coordinate build of test equipment integral to perform the required test.\nC. Perform technical analysis for capital equipment requests (CAR).\nD. Program LabVIEW software to support DAQ functions and test control.\nE. Coordinate and maintain calibration activities.\nF. Recommend test procedures to the lab\u2019s customers.\nG. Primary contact for in-process testing.\nH. Approve test procedures and test reports.\nI. Maintain a safe working environment by providing adequate precautions to tests in process. Design safety into every test and activity.\nJ. QUALITY: Continuous improvement with a goal of perfection is everyone's responsibility. The established goals of improved first time yield, cycle time reduction and customer satisfaction for teams, functions, divisions and group shall apply to all services and products provided.\nK. Perform testing as required.\nL. Other duties as assigned\n\nPOSITION CRITERIA:\n- Demonstrated strong communication skills, both written and verbal\n- Demonstrated strong mechanical aptitude\n- Ability to comprehend complex written instructions\n- Working knowledge of hydraulics, electronics and test equipment operation\n- Demonstrated commitment to meet customer requirements\n- Ability to work proficiently in Microsoft Office applications\n- Demonstrated ability to troubleshoot equipment and implement repairs\n\n\nPREFERRED QUALIFICATIONS:\n- Advanced degree preferred\n- Previous work experience in Aerospace industry\n- Previous working knowledge of CATIA V5 and Enovia\n- Previous working knowledge of Vibration Fixture Design\n- Program Management experience\n- Experience with LabView software for data acquisition and control\nBasic Qualifications (Including Educational Requirements) BASIC QUALIFICATIONS:\n- Bachelor\u2019s degree in Mechanical Engineering\n- Minimum of two (2) years of experience in an engineering related field\n- Must be legally authorized to work in the United States without company sponsorship\nRelocation benefit provided? Yes (US/PR Only)\nCity Beltsville\nState Maryland", "date_new": "2012-04-07 02:08:25", "url": "http://find.eaton.jobs/xml/27714523/job", "country": "United States", "company": "Eaton Corporation", "title": "Test Engineer", "reqid": "50540BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27714523}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Test Engineer\nAutoReqId 50540BR\nBusiness Function Engineering\nDivision Conveyance Systems Division\nJob Description Eaton Corporation located in Beltsville, MD is currently seeking a Test Engineer to join the team. The primary function of this role will be to test both prototype and production hardware to verify that it performs to the customer required specifications. The incumbent will study the specifications and examine the hardware. Determine what data is needed and then identify the actual test methods, materials, fixtures and equipment required. Schedule and perform tests; present data to the requester. Maintain responsibility for all engineering details associated with the testing performed at this facility and others as needed to fulfill customer obligations. Additionally, this team member will be responsible for:\n\nA. In-house expert on all test equipment, procedures, government and customer specifications.\nB. Design and coordinate build of test equipment integral to perform the required test.\nC. Perform technical analysis for capital equipment requests (CAR).\nD. Program LabVIEW software to support DAQ functions and test control.\nE. Coordinate and maintain calibration activities.\nF. Recommend test procedures to the lab\u2019s customers.\nG. Primary contact for in-process testing.\nH. Approve test procedures and test reports.\nI. Maintain a safe working environment by providing adequate precautions to tests in process. Design safety into every test and activity.\nJ. QUALITY: Continuous improvement with a goal of perfection is everyone's responsibility. The established goals of improved first time yield, cycle time reduction and customer satisfaction for teams, functions, divisions and group shall apply to all services and products provided.\nK. Perform testing as required.\nL. Other duties as assigned\n\nPOSITION CRITERIA:\n- Demonstrated strong communication skills, both written and verbal\n- Demonstrated strong mechanical aptitude\n- Ability to comprehend complex written instructions\n- Working knowledge of hydraulics, electronics and test equipment operation\n- Demonstrated commitment to meet customer requirements\n- Ability to work proficiently in Microsoft Office applications\n- Demonstrated ability to troubleshoot equipment and implement repairs\n\n\nPREFERRED QUALIFICATIONS:\n- Advanced degree preferred\n- Previous work experience in Aerospace industry\n- Previous working knowledge of CATIA V5 and Enovia\n- Previous working knowledge of Vibration Fixture Design\n- Program Management experience\n- Experience with LabView software for data acquisition and control\nBasic Qualifications (Including Educational Requirements) BASIC QUALIFICATIONS:\n- Bachelor\u2019s degree in Mechanical Engineering\n- Minimum of two (2) years of experience in an engineering related field\n- Must be legally authorized to work in the United States without company sponsorship\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-04-06 19:03:56", "url": "http://find.eaton.jobs/xml/27701579/job", "country": "United States", "company": "Eaton Corporation", "title": "Test Engineer", "reqid": "50540BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27701579}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Ducting Welder - 2nd Shift\nAutoReqId 50607BR\nBusiness Function Manufacturing\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has three (3) openings for a Ducting Welder on 2nd shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Achieve and maintain a minimum welding certification.\n- Fabricate details and duct assemblies by scribing, cutting and grinding to tight tolerances.\n- Work in accordance with general safety rules and practices.\n- Keep immediate work area clean and free from hazards.\n- Welder will be responsible for finished parts that conform to drawings and specification.\n- Participate in continuous improvement of processes.\n- Perform other related duties as assigned.\n- Weld details and ducting system-ducting systems.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- High school diploma or equivalent required.\n- Minimum of three (3) years proficiency in Gas Tungsten Arc welding on Iconel, Stainless and/or Titanium with thickness ranging from .02 to .125.\n- This is an ITAR regulated facitility, US Citizenship or permenant residency is required.\n\nPosition Criteria:\n- Certification to AWS specification D17.1 is necessary.\n- Strong math skills and ability to read/interpret engineering drawings.\n- Strong visual skills.\n- Experience with band saw, belt sander, chop saw, rotary tools/grinders and hand held inspection tools (i.e. calipers, micrometers, pi tape, loops, etc.).\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 3 Years\nTravel Required No Travel\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-04-03 21:28:01", "url": "http://find.eaton.jobs/xml/27617353/job", "country": "United States", "company": "Eaton Corporation", "title": "Ducting Welder - 2nd Shift", "reqid": "50607BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27617353}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Ducting Welder\nAutoReqId 50608BR\nBusiness Function Manufacturing\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Ducting Welder on first shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Achieve and maintain a minimum welding certification.\n- Fabricate details and duct assemblies by scribing, cutting and grinding to tight tolerances.\n- Work in accordance with general safety rules and practices.\n- Keep immediate work area clean and free from hazards.\n- Welder will be responsible for finished parts that conform to drawings and specification.\n- Participate in continuous improvement of processes.\n- Weld details and ducting system-ducting systems.\n- Perform other related duties as assigned.\n- Weld details and ducting system-ducting systems.\n- Perform other related duties as assigned.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- High school diploma or equivalent required.\n- Minimum of three (3) years proficiency in Gas Tungsten Arc welding on Iconel, Stainless and/or Titanium with thickness ranging from .02 to .125.\n- This is an ITAR regulated facility, US Citizenship or permenant residency is required.\n\nPosition Criteria:\n- Certification to AWS specification D17.1 is necessary.\n- Strong math skills and ability to read/interpret engineering drawings.\n- Strong visual skills.\n- Experience with band saw, belt sander, chop saw, rotary tools/grinders and hand held inspection tools (i.e. calipers, micrometers, pi tape, loops, etc.).\n- Ability to lift 25 lbs.\n- Must be able to stand 8 hours a day.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 3 Years\nTravel Required No Travel\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-04-03 21:27:16", "url": "http://find.eaton.jobs/xml/27617336/job", "country": "United States", "company": "Eaton Corporation", "title": "Ducting Welder", "reqid": "50608BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27617336}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Ducting Welder\nAutoReqId 50608BR\nDivision Conveyance Systems Division\nBusiness Function Manufacturing\nEmployee category Regular\nExperience\nLevel Minimum 3 Years\nTravel Required No Travel\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Ducting Welder on first shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Achieve and maintain a minimum welding certification.\n- Fabricate details and duct assemblies by scribing, cutting and grinding to tight tolerances.\n- Work in accordance with general safety rules and practices.\n- Keep immediate work area clean and free from hazards.\n- Welder will be responsible for finished parts that conform to drawings and specification.\n- Participate in continuous improvement of processes.\n- Weld details and ducting system-ducting systems.\n- Perform other related duties as assigned.\n- Weld details and ducting system-ducting systems.\n- Perform other related duties as assigned.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- High school diploma or equivalent required.\n- Minimum of three (3) years proficiency in Gas Tungsten Arc welding on Iconel, Stainless and/or Titanium with thickness ranging from .02 to .125.\n- This is an ITAR regulated facility, US Citizenship or permenant residency is required.\n\nPosition Criteria:\n- Certification to AWS specification D17.1 is necessary.\n- Strong math skills and ability to read/interpret engineering drawings.\n- Strong visual skills.\n- Experience with band saw, belt sander, chop saw, rotary tools/grinders and hand held inspection tools (i.e. calipers, micrometers, pi tape, loops, etc.).\n- Ability to lift 25 lbs.\n- Must be able to stand 8 hours a day.\nRelocation benefit provided? Yes (US/PR Only)\nCity Beltsville\nState Maryland", "date_new": "2012-04-03 19:46:48", "url": "http://find.eaton.jobs/xml/27614359/job", "country": "United States", "company": "Eaton Corporation", "title": "Ducting Welder", "reqid": "50608BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27614359}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Ducting Welder - 2nd Shift\nAutoReqId 50607BR\nDivision Conveyance Systems Division\nBusiness Function Manufacturing\nEmployee category Regular\nExperience\nLevel Minimum 3 Years\nTravel Required No Travel\nJob Description Eaton Corporation in Beltsville, MD has three (3) openings for a Ducting Welder on 2nd shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Achieve and maintain a minimum welding certification.\n- Fabricate details and duct assemblies by scribing, cutting and grinding to tight tolerances.\n- Work in accordance with general safety rules and practices.\n- Keep immediate work area clean and free from hazards.\n- Welder will be responsible for finished parts that conform to drawings and specification.\n- Participate in continuous improvement of processes.\n- Perform other related duties as assigned.\n- Weld details and ducting system-ducting systems.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- High school diploma or equivalent required.\n- Minimum of three (3) years proficiency in Gas Tungsten Arc welding on Iconel, Stainless and/or Titanium with thickness ranging from .02 to .125.\n- This is an ITAR regulated facitility, US Citizenship or permenant residency is required.\n\nPosition Criteria:\n- Certification to AWS specification D17.1 is necessary.\n- Strong math skills and ability to read/interpret engineering drawings.\n- Strong visual skills.\n- Experience with band saw, belt sander, chop saw, rotary tools/grinders and hand held inspection tools (i.e. calipers, micrometers, pi tape, loops, etc.).\nRelocation benefit provided? Yes (US/PR Only)\nCity Beltsville\nState Maryland", "date_new": "2012-04-03 19:46:40", "url": "http://find.eaton.jobs/xml/27614354/job", "country": "United States", "company": "Eaton Corporation", "title": "Ducting Welder - 2nd Shift", "reqid": "50607BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27614354}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Supply Chain Manager\nAutoReqId 50272BR\nBusiness Function Supply Chain\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Supply Chain Manager. This position is responsible for Managing key Supply Chain related functions such as materials planning, scheduling and ordering activities associated with the delivery of specific customer products, direct and indirect material purchasing, inventory control and warehousing; manages and directs supply chain personnel in the procurement, receipt, disbursement, and inventory control of material to ensure on-time delivery of customer orders while maintaining assigned inventory levels; and is expected to train and educate direct reports on the use of supply chain management techniques, various business systems, varieties of reports and other related tools to ensure timely and economical completion of customer requirements. Primary responsibilities will include:\n\nEssential Functions:\n\nA. Manage current and future demand requirements with manufacturing and supplier capabilities/capacities to ensure completion of customer requirements\nB. Implement methods, practices and techniques to ensure the most economical movement of materials through the supply chain to achieve cost-effective logistics practices and inventory levels while meeting customer delivery requirements\nC. Manage plant purchasing activities for items procured on local basis in order to compliment centrally purchased items\nD. Analyze data, including enterprise requirements planning information and prepares consolidated managerial reports as needed to facilitate and recommend actions to ensure plant/product line optimal supply chain execution\nE. Ensure correct planning parameters and transaction disciplines are utilized in order execution systems (such as MFGPro) to ensure proper order generation and inventory balances\nF. Manage material cost and schedule impact of proposed engineering changes in addition to taking necessary actions to ensure successful implementation and incorporation of approved engineering releases\nG. Ensure quality of shipping documentation to meet corporate financial and customer audit requirements\nH. Devise and manages physical inventory audit methodology which meets corporate, governmental and customer specifications\nI. Evaluate operational performance of the group in order to facilitate performance management, merit promotions, job transfers, dismissals, commendations, etc.\nJ. Coordinate with central Corporate Supply Chain Function to provide data and participate in teams in order to drive best practices across Eaton Corp.\nK. Support compliance initiatives and corporate commodity, logistics, and inventory strategies to achieve synergy across the operation\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\u2022 Bachelor\u2019s Degree from an accredited institution required\n\u2022 Minimum 5 years of experience in manufacturing operations\n\u2022 Minimum 3 years of experience in a leadership role\n\u2022 Candidates must be prequalified to work on defense projects, per the state department ITAR regulations\n\nPosition Criteria:\n\u2022 Full knowledge of materials planning systems (MRP/ERP) requirements and order generation process logic\n\u2022 Thorough understanding of Supply Chain Management operational concepts surrounding production planning, scheduling, purchasing, supplier selection, inventory control, logistics, stockroom operations, and shipping/receiving\n\u2022 Detailed knowledge of Lean Manufacturing and Process Variation Reduction (Six Sigma) concepts and tool sets as they relate to materials management\n\u2022 Multiple years of related professional and supervisory/Managerial experience\n\u2022 Ability to lead cross-functional process improvement teams\n\nPreferred Qualifications:\n\u2022 Master\u2019s Degree from an accredited institution preferred\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-03-27 18:26:49", "url": "http://find.eaton.jobs/xml/27418713/job", "country": "United States", "company": "Eaton Corporation", "title": "Supply Chain Manager", "reqid": "50272BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27418713}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Quality Supervisor\nAutoReqId 50544BR\nBusiness Function Quality\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Quality Supervisor. This person is functionally responsible for designing, developing, coordinating and deploying work instructions/procedures and associated process controls for the assigned product line/family; develops process improvements and cost control programs throughout the plant; reviews customer/industry/internal specifications to ensure compliance with stated requirements; provides technical support to operations, customers, and suppliers as needed and provide training and supervise others as required. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n\nA. Completes Quality Engineering assignments with minimal supervision.\nB. Define, specify, and implement quality standards and procedures for manufacturing processes.\nC. Lead or provide technical advice and counsel to cross-functional teams assigned to process improvement projects / problem solving teams / product development teams.\nD. Provide technical guidance to less experienced Quality Engineers.\nE. Assure that product shipped meets internal and external customer requirements.\nF. Develop and implement corrective actions including verification activities.\nG. Host Customer and Third Party Auditors as needed.\nH. Provide technical support to both internal and external customers and suppliers as needed.\nI. Formulate and implement quality assurance procedures, policies, and standards. Ensure these documents align with the recognized Aerospace Quality System Standard as well as Eaton Objectives, Policies and Procedures.\nJ. Supervise other personnel as assigned or required.\nK. Other duties as assigned\n\nPosition Criteria:\n\u2022 Ability to read and understand blue prints, specifications, and requirements including GD&T.\n\u2022 Thorough understanding of machining, welding, assembly operations, gauging, SPC, APQP, and quality assurance systems (ISO 9001, AS9100).\n\u2022 Experience in performing Quality Audits.\n\u2022 Experience using PC configured with MS Windows OS. Familiarity with MS Office software is desired.\n\nPreferred Criteria:\n\u2022 Project Management experience is preferred.\n\u2022 Prior supervisory experience is preferred.\n\u2022 ASQ Certified Quality Engineer (CQE), Certified Quality Auditor (CQA), or Manager of Quality/Organizational Excellence (MOQ/OE) is preferred.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\u2022 Bachelor\u2019s degree from an accredited institution\n\u2022 Minimum 3 years experience in a manufacturing environment.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 3 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-03-26 19:14:49", "url": "http://find.eaton.jobs/xml/27395396/job", "country": "United States", "company": "Eaton Corporation", "title": "Quality Supervisor", "reqid": "50544BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27395396}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Customer Service Manager\nAutoReqId 49960BR\nBusiness Function Marketing and Sales\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Customer Service Manager. This person will be responsible for managing the overall performance of the Customer Service team in Beltsville, MD; settings goals and objectives consistent with plant, division and aerospace strategic initiatives; and coaching and enabling team members to drive Customer Service Initiatives that maximize customer satisfaction, increase sales, reduce cycle time, reduce cost and improve quality. The ideal candidate will possess the following:\n\nEssential Functions:\nA. Effectively manage, plan, assign and coordinate all aspects of the customer service team in Beltsville, including: order entry, contract administration, pricing, intake analysis and account management.\nB. Recommend staff actions including selection, performance management actions, conduct performance appraisals, robust development plans, manage employee schedules to ensure maximum employee engagement and productivity.\nC. Utilize analytical problem solving skills such as 8D, Six Sigma and root cause analysis to drive changes and continuous improvement throughout the organization.\nD. Drive customer service initiatives to maximize customer satisfaction, leveraging resources to ensure maximum efficiency and reduced cycle time.\nE. Support and engage with the plant(s) to achievement of operational goals including On-time delivery, DPPM, Safety, CONC, DOH, etc.\nF. Coordinates market analysis efforts teaming with Product Managers, Sales and others to monitor and increase sales intake and ensure maximum intake forecast accuracy.\nG. Develop goals for the team that support the plant(s), CSD and the customer.\nH. Division responsibilities as requested.\nBasic Qualifications (Including Educational Requirements) \u2022 Bachelor\u2019s Degree from an accredited university required.\n\u2022 Minimum of 5 years of work experience in a customer support role required.\n\u2022 Minimum of 3 years of direct management experience required.\n\u2022 Must be authorized to work in the U.S. without company sponsorship.\n\n\nPosition Criteria:\n\n\u2022 Strong leadership and coaching skills. The ability to build and sustain a highly effective team.\n\u2022 Excellent interpersonal skills.\n\u2022 Ability to develop and communicate a sense of urgency to meet team goals and customer needs.\n\u2022 Strong teaming skills with the ability to leverage resources.\n\u2022 Ability to creativity leverage resources.\n\u2022 Possess strong problem solving skills.\n\n\nPreferred:\n\n\u2022 Master\u2019s or MBA degree from an accredited institution preferred.\n\u2022 Prefer experience from an Aerospace manufacturing environment.\n\u2022 Prefer certification or training Lean Manufacturing, Six Sigma or Continuous Improvement.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 25 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-03-15 22:58:43", "url": "http://find.eaton.jobs/xml/27180613/job", "country": "United States", "company": "Eaton Corporation", "title": "Customer Service Manager", "reqid": "49960BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27180613}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Manufacturing Associate I: Flanges CNC Operator\nAutoReqId 50148BR\nBusiness Function Manufacturing\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Flanges CNC Operator. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Must be able to set up and operate multiple machines to perform a sequence of operations such as turn, drill, and bore a variety of metal components.\n- Fully understand production routers which include material types, lot numbers and quality, router sign-off procedures, cutter verification stamps and SPC data entry.\n- Identify materials and tooling and inserts for specific operations.\n- Be able to perform basic setup.\n- Be able to set up gauges.\n- Use all machine commands and controls.\n- Understand and maintain UPL boards data.\n- Work in different cells in the factory.\n- Maintain cell charts.\n- Load program from DNC to machines.\n- Must be able to read blueprints and in accordance with standard shop practices.\n- Ensure accuracy of program and the quality of parts through visual inspection and physical\nmeasurement.\n- Ability to safely and accurately use a wide variety of hand tools and gages.\n- Work in accordance with general safety rules and practices.\n- Keeps immediate work area clean and free from hazards.\n- Responsible for finished parts conformity to print or specification.\n- Perform other related duties as assigned.\n\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes earplugs, safety glasses & steel-toed shoes.)\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Must be legally authorized to work in the United States without company sponsorship.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Qualifications:\n- One to three years manufacturing experience. CNC/Lathe experience desirable, but not required.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-15 22:57:42", "url": "http://find.eaton.jobs/xml/27180598/job", "country": "United States", "company": "Eaton Corporation", "title": "Manufacturing Associate I: Flanges CNC Operator", "reqid": "50148BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 27180598}, {"country_short": "USA", "city": "Baltimore", "description": "External Job\nTitle Field Service Engineer - Virginia or Maryland\nAutoReqId 49059BR\nBusiness Function Engineering\nDivision Electrical Engineering Services & Systems\nJob Description Eaton Corporation's Electrical Services and Systems division has an opening for a Field Service Engineer. This position can be located in Richmond, VA, Norfolk, VA, Lynchberg, VA, Fredricksburg, VA, Charlottesville, VA or Hanover, MD.\n\nThe primary function of the Field Service Engineer is to provide field service engineering and technical assistance to customers in areas of installation, startup, maintenance, repair, training and modification on power transmission, distribution and generation equipment and systems. Individual must be capable of self-managing assigned projects for electrical equipment, including working knowledge of electrical test and diagnostic equipment. Equipment includes: transformers, oil circuit breakers, power circuit breakers, SF6 gas circuit breakers, metal-clad and enclosed switcher, protective relay, power cables, substation equipment, motor control centers, medium voltage control, excitation equipment, automatic transfer switches, rotating equipment and AC Drives. Candidate must be able to deliver technical solutions to customers with a high degree of professionalism. Performs conventional, less complex engineering assignments that may involve equipment or product design, testing of materials, preparation of specifications, process studies, or research investigations.\n\nPosition Criteria:\nAbility to be available for 24-hour on call duty and respond to emergency situations with minimal notification.\nAbility to keep current with product technology as measured by ability to troubleshoot and repair various products and to instruct others.\nExperience writing technical bulletins and service tips to assist department personnel in resolving problems of a technical nature.\nStrong communication and interpersonal skills\nAbility to be flexible to adjust to changing field conditions. Strong computer skills\n\n\nPlease note that relocation is not included with this position. Only local candidates within the areas listed will be considered.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Bachelor\u2019s Degree in Engineering from an accredited Institution\n- Minimum of 5 years experience in an electrical field service engineer or technician role\n- Authorized to work in the US without company sponsorship\n- Valid Drivers License with no restrictions\n- Only candidates currently located within a 50 mile radius of Richmond/Norfolk/Lynchberg/Fredricksberg/Charlottesville, VA or Hanover, MD will be considered\n\nPreferred Qualifications:\n- BS in Electrical Engineering\n- Experience in Power Systems Automation / Engineering\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Baltimore\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 25 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-01 22:00:14", "url": "http://find.eaton.jobs/xml/26871655/job", "country": "United States", "company": "Eaton Corporation", "title": "Field Service Engineer - Virginia or Maryland", "reqid": "49059BR", "state": "Maryland", "state_short": "MD", "location": "Baltimore, MD", "uid": 26871655}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Manufacturing Associate III: Ducting Fitter - 2nd Shift\nAutoReqId 49074BR\nBusiness Function Manufacturing\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has three (3) openings for a Manufacturing Associate III: Ducting Fitter on 2nd shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Ducting fitter will cut, deburr, and clean parts to tight tolerances in preparation for welding.\n- Prepare work orders.\n- Ensure calibration of fixtures.\n- Transport work to various areas\nof the shop.\n- Perform some mechanical assembly, operate equipment and does some milling.\n- Must be able to read and\ncomprehend specifications,\nengineering drawings and\nmanufacturing routings.\n- Must have good math skills.\n- Work in accordance with general safety rules and practices.\n- Keep immediate work area clean and free of hazards.\n- Fitter will be responsible for finished parts conformity to drawings and specification.\n- Participate in continuous improvement of processes.\n- Peform other related duties as assigned.\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes safety glasses).\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Minimum five to seven years manufacturing experience. - Must be legally authorized to work in the United States without company sponsorship.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Criteria:\n- CNC/Lathe experience desirable, but not required.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-02-14 21:23:38", "url": "http://find.eaton.jobs/xml/26523500/job", "country": "United States", "company": "Eaton Corporation", "title": "Manufacturing Associate III: Ducting Fitter - 2nd Shift", "reqid": "49074BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 26523500}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Manufacturing Associate III: Ducting Fitter - 2nd Shift\nAutoReqId 49074BR\nDivision Conveyance Systems Division\nBusiness Function Manufacturing\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required No Travel\nJob Description Eaton Corporation in Beltsville, MD has three (3) openings for a Manufacturing Associate III: Ducting Fitter on 2nd shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Ducting fitter will cut, deburr, and clean parts to tight tolerances in preparation for welding.\n- Prepare work orders.\n- Ensure calibration of fixtures.\n- Transport work to various areas\nof the shop.\n- Perform some mechanical assembly, operate equipment and does some milling.\n- Must be able to read and\ncomprehend specifications,\nengineering drawings and\nmanufacturing routings.\n- Must have good math skills.\n- Work in accordance with general safety rules and practices.\n- Keep immediate work area clean and free of hazards.\n- Fitter will be responsible for finished parts conformity to drawings and specification.\n- Participate in continuous improvement of processes.\n- Peform other related duties as assigned.\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes safety glasses).\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Minimum five to seven years manufacturing experience. - Must be legally authorized to work in the United States without company sponsorship.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Criteria:\n- CNC/Lathe experience desirable, but not required.\nRelocation benefit provided? No\nCity Beltsville\nState Maryland", "date_new": "2012-02-14 18:42:38", "url": "http://find.eaton.jobs/xml/26516144/job", "country": "United States", "company": "Eaton Corporation", "title": "Manufacturing Associate III: Ducting Fitter - 2nd Shift", "reqid": "49074BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 26516144}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Manufacturing Associate I: Flanges CNC Operator - 2nd Shift\nAutoReqId 48908BR\nBusiness Function Manufacturing\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Flanges CNC Operator on second shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Must be able to set up and operate multiple machines to perform a sequence of operations such as turn, drill, and bore a variety of metal components.\n- Fully understand production routers which include material types, lot numbers and quality, router sign-off procedures, cutter verification stamps and SPC data entry.\n- Identify materials and tooling and inserts for specific operations.\n- Be able to perform basic setup.\n- Be able to set up gauges.\n- Use all machine commands and controls.\n- Understand and maintain UPL boards data.\n- Work in different cells in the factory.\n- Maintain cell charts.\n- Load program from DNC to machines.\n- Must be able to read blueprints and in accordance with standard shop practices.\n- Ensure accuracy of program and the quality of parts through visual inspection and physical\nmeasurement.\n- Ability to safely and accurately use a wide variety of hand tools and gages.\n- Work in accordance with general safety rules and practices.\n- Keeps immediate work area clean and free from hazards.\n- Responsible for finished parts conformity to print or specification.\n- Perform other related duties as assigned.\n\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes earplugs, safety glasses & steel-toed shoes.)\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Must be legally authorized to work in the United States without company sponsorship.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Qualifications:\n- One to three years manufacturing experience. CNC/Lathe experience desirable, but not required.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-01-30 18:30:46", "url": "http://find.eaton.jobs/xml/26188785/job", "country": "United States", "company": "Eaton Corporation", "title": "Manufacturing Associate I: Flanges CNC Operator - 2nd Shift", "reqid": "48908BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 26188785}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Manufacturing Associate I: Flanges CNC Operator - 2nd Shift\nAutoReqId 48908BR\nDivision Conveyance Systems Division\nBusiness Function Manufacturing\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Flanges CNC Operator on second shift. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Must be able to set up and operate multiple machines to perform a sequence of operations such as turn, drill, and bore a variety of metal components.\n- Fully understand production routers which include material types, lot numbers and quality, router sign-off procedures, cutter verification stamps and SPC data entry.\n- Identify materials and tooling and inserts for specific operations.\n- Be able to perform basic setup.\n- Be able to set up gauges.\n- Use all machine commands and controls.\n- Understand and maintain UPL boards data.\n- Work in different cells in the factory.\n- Maintain cell charts.\n- Load program from DNC to machines.\n- Must be able to read blueprints and in accordance with standard shop practices.\n- Ensure accuracy of program and the quality of parts through visual inspection and physical\nmeasurement.\n- Ability to safely and accurately use a wide variety of hand tools and gages.\n- Work in accordance with general safety rules and practices.\n- Keeps immediate work area clean and free from hazards.\n- Responsible for finished parts conformity to print or specification.\n- Perform other related duties as assigned.\n\n\nPHYSICAL DEMAND: Occasionally, exerting over 50 pounds of force. Frequent walking with the rest of\nthe time spent standing.\n\nWORKING CONDITIONS: Typical machine shop with exposure to oil, dirt and heat. Ability to work\novertime as required. Ability to wear all required personal protective equipment (includes earplugs, safety glasses & steel-toed shoes.)\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Requires high school diploma or equivalent plus advanced shop math and use of precision measuring instruments.\n- Ability to read blueprints and detailed written instructions.\n- Ability to interact and participate in a team driven culture.\n- Must be legally authorized to work in the United States without company sponsorship.\n- No relocation benefit is offered for this position. Only candidates residing within the immediate Beltsville area (50 miles) will be considered for this position.\n\nPreferred Qualifications:\n- One to three years manufacturing experience. CNC/Lathe experience desirable, but not required.\nRelocation benefit provided? No\nCity Beltsville\nState Maryland", "date_new": "2012-01-30 18:18:29", "url": "http://find.eaton.jobs/xml/26188069/job", "country": "United States", "company": "Eaton Corporation", "title": "Manufacturing Associate I: Flanges CNC Operator - 2nd Shift", "reqid": "48908BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 26188069}, {"country_short": "USA", "city": "Williamsport", "description": "External Job\nTitle Extrusion Operator\nAutoReqId 47603BR\nDivision Fluid Filtration Division\nBusiness Function Production\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nJob Description Eaton Corporation located in Williamsport, Md has an opening for Extrusion Operator to perform the following: Set-up and control extrusion process to ensure proper production, rate, and yields. Be able to follow instructions from production order and team leader. Weigh and label containers as instructed. Stack containers as requested for Shipping Department. Perform SPC and statistical analysis as required. Enter data into SPC computers. Clean out mixes and grinder as instructed. Operate a forklift. Will perform other related duties as required.\nBasic Qualifications (Including Educational Requirements) Eaton Corporation located in Williamsport, Md has an opening for Extrusion Operator to perform the following: Set-up and control extrusion process to ensure proper production, rate, and yields. Be able to follow instructions from production order and team leader. Weigh and label containers as instructed. Stack containers as requested for Shipping Department. Perform SPC and statistical analysis as required. Enter data into SPC computers. Clean out mixes and grinder as instructed. Operate a forklift. Will perform other related duties as required.\nRelocation benefit provided? No\nCity Williamsport\nState Maryland", "date_new": "2012-01-06 16:37:43", "url": "http://find.eaton.jobs/xml/25734396/job", "country": "United States", "company": "Eaton Corporation", "title": "Extrusion Operator", "reqid": "47603BR", "state": "Maryland", "state_short": "MD", "location": "Williamsport, MD", "uid": 25734396}, {"country_short": "USA", "city": "Williamsport", "description": "External Job\nTitle Extrusion Operator\nAutoReqId 47603BR\nBusiness Function Production\nDivision Fluid Filtration Division\nJob Description Eaton Corporation located in Williamsport, Md has an opening for Extrusion Operator to perform the following: Set-up and control extrusion process to ensure proper production, rate, and yields. Be able to follow instructions from production order and team leader. Weigh and label containers as instructed. Stack containers as requested for Shipping Department. Perform SPC and statistical analysis as required. Enter data into SPC computers. Clean out mixes and grinder as instructed. Operate a forklift. Will perform other related duties as required.\nBasic Qualifications (Including Educational Requirements) Eaton Corporation located in Williamsport, Md has an opening for Extrusion Operator to perform the following: Set-up and control extrusion process to ensure proper production, rate, and yields. Be able to follow instructions from production order and team leader. Weigh and label containers as instructed. Stack containers as requested for Shipping Department. Perform SPC and statistical analysis as required. Enter data into SPC computers. Clean out mixes and grinder as instructed. Operate a forklift. Will perform other related duties as required.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Williamsport\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-01-06 16:28:30", "url": "http://find.eaton.jobs/xml/25734365/job", "country": "United States", "company": "Eaton Corporation", "title": "Extrusion Operator", "reqid": "47603BR", "state": "Maryland", "state_short": "MD", "location": "Williamsport, MD", "uid": 25734365}, {"country_short": "USA", "city": "Beltsville", "description": "External Job\nTitle Lead Engineer - Pneumatic Ducting Systems\nAutoReqId 47288BR\nBusiness Function Engineering\nDivision Conveyance Systems Division\nJob Description Eaton Corporation in Beltsville, MD has an opening for a Lead Engineer. This person will design, analyze and optimize pneumatic ducting systems and components to meet customer specifications and requirements. The ideal candidate will possess the following qualifications:\n\nEssential Functions:\n- Design, analyze and optimize pneumatic ducting systems and related components to meet customer specifications and requirements.\n- Verify completed drawings, reports, ECOs and BOMs for clarity, completeness and conformity to standards, procedures and specifications. Verify accuracy of calculations, dimensioning and tolerancing.\n- Responsible for complete designs from concept to qualification.\n- Work with customers, suppliers, project managers and other engineering disciplines to optimize designs and identify cost trade-offs.\n- Initiate and promote generation of new ideas and document it appropriately for possible future patent application and protection.\n- Prepare for and participate in Preliminary Design Reviews (PDRs) and Critical Design Reviews (CDRs) to ensure product meets design criteria.\n- Promote cordial relationships, foster and maintain a favorable business profile with current and prospective customers, vendors, peers and other professionals.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- BS in Mechanical, Aerospace, or Systems Engineering from an accredited institution required.\n- Minimum of 5 years of engineering experience working on ducting systems.\n- Minimum of 3 years of experience using CATIA\n- Must be legally authorized to work in the United States without company sponsorship\n\n\nPreferred Qualifications:\n- A thorough technical knowledge of aerospace pneumatic ducting systems and flexible joints, which includes product design, manufacturing methods (in-house and sub-contracted), qualification testing and aircraft certification.\n- Proficiency CATIA V5 is preferred.\n- Working knowledge of major aircraft systems: ECS, EBU and anti-icing are a plus.\n- Working knowledge of Design For Six Sigma (DFSS), Six Sigma methodology, Failure - Modes and Effects Analysis (FMEA) and tolerance allocation is preferred.\nRegion North America - US/Puerto Rico\nCountry United States\nState Maryland\nCity Beltsville\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 25 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2011-11-15 22:20:28", "url": "http://find.eaton.jobs/xml/24884908/job", "country": "United States", "company": "Eaton Corporation", "title": "Lead Engineer - Pneumatic Ducting Systems", "reqid": "47288BR", "state": "Maryland", "state_short": "MD", "location": "Beltsville, MD", "uid": 24884908}]