[{"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Engineering Manager, Data & Design\nAutoReqId 51963BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for an Engineering Manager, Data and Design. This position is responsible for overall leadership and supervision of the engineering services function. Its primary accountability is for process excellence in configuration/data management and design but its holder is also measured on personnel leadership, organizational development, and timely technical quality. Additionally, this position holds primary responsibility and accountability for lean engineering, which includes internal productivity metrics for engineering functions and assurance of proper documentation of those functions.\n\nDuties and Responsibilities:\n\n1. Supervise a team of support personnel to assure effective ongoing configuration/data management and design. Provide process advice and guidance to this team.\n2. Development of organizational capability/capacity and engineering support services skills among staff to support the site\u2019s strategy. Maintenance of appropriate training programs to assure continuous learning.\n3. Development of improved engineering services processes that add value to our products through change control compliance. Development of documented procedures for the engineering department around best practices and using lessons learned. Acting as champion of lean processes and driving change across the engineering department in terms of process improvement and productivity.\n4. Development and implementation of processes and tools for engineering services consistent with industry best practices. Monitoring to assure adherence to defined processes.\n5. Continuous improvement of resource management, productivity, and first-pass quality.\n7. Support and execution of site engineering initiatives. Participation in site leadership team.\n8. Performing other duties as assigned.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\n- Bachelor's Degree in Engineering.\n- 2 Years of experience as a manger of people.\n- At least 5 years of experience in an Aerospace product development environment\n- Must be prequalified to work on defense projects, per the state department ITAR regulations\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-18 20:11:00", "url": "http://find.eaton.jobs/xml/28801477/job", "country": "United States", "company": "Eaton Corporation", "title": "Engineering Manager, Data & Design", "reqid": "51963BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 28801477}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Project Engineer\nAutoReqId 51155BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Sr. Project Engineer. This position will lead an engineering team performing conceptual design, development and qualification of hydraulic valves, actuators and reservoirs for various commercial and military applications, including nose wheel steering, landing gear control, general aircraft hydraulic systems. Successful candidates will be able to independently lead a major project from initial design conception through the design phases, up to and including qualification and transition to production. The position requires the use of six sigma tools to ensure project success and may involve use of some earned value tools.\n\nDuties and Responsibilities:\n\n1. Lead teams engaged in any or all of the activities below. Provide mentorship, technical advice, and oversight to component design engineers locally and at other Eaton or vendor sites, locally and globally.\n2. Estimate labor/material budgets for new and scope change proposals. Establish design-to-cost (DTC) models and track configurations to DTC compliance per company practices.\n3. Establish technical work breakdown structures and budget estimates in conjunction with Program Management and Engineering Resource Managers. Manage progress to engineering task plans and schedules through the project, including variance analysis of earned value metrics as appropriate.\n4. Develop appropriate allocations, and design margin strategy, of system requirements to component attributes including derived characteristics. Assist in review and refinement of system or component specifications. Develop and maintain specification compliance data throughout the product development life cycle.\n5. Lead component development by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other engineers. Apply engineering knowledge and 3D modeling skills to develop designs compliant with internal and external standard practices.\n6. Develop, execute, and manage a risk management plan including risk mitigation tasks. Solve technical problems with products and designs; drive teams to efficiently and effectively execute problem solving assignments.\n7. Lead the team in utilizing six sigma tools (especially design for six sigma) to ensure that critical to quality measures are defined and tracked through the design and validation process. Conduct reviews to ensure that design variability and process capability are understood and defined in design documentation.\n8. Prepare technical presentations for internal and external customers, including preliminary/critical design reviews and other reviews as required.\n9. Participate in and lead meetings with the customer and other engineers, distributing the results to the development team and coordinating actions as necessary. Ensure information flow within the local Eaton team, with other Eaton sites (locally and globally), and contractor teams as appropriate to facilitate work flow, efficiency and quality of work results delivered to the customer\n10. Prepare or approve SDRL documents, including analysis reports, certification reports etc.\n11. Participate in the component/system qualification process in conjunction with the Eaton and outside test laboratories.\n12. Perform other duties as assigned.\n\nPosition Criteria:\n\nAbility to understand system and customer specifications, layouts and functions, and the interfaces to other platform systems.\n\nFamiliarity with manufacturing and ability to work closely with manufacturing engineers to make use of process capability data in design.\n\nGood written, oral and presentation skills, leadership qualities and the ability to work well with customers and development team members.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\n- Bachelor of Science Degree in Engineering from an accredited institution is required.\n- Minimum 10 years of Mechanical Engineering experience in an Aerospace, Automotive, or Medical Device environment.\n- Minimum 5 years leading projects\n- Must be prequalified to work on defense projects, per the state department ITAR regulations (US Citizen, Green Card, or Political Asylee).\n\nPreferred Criteria:\n\n- 5 years experience with aircraft component development (experience with valves, landing gear, and hydraulic components highly desired) and 3-5 years experience with project management and work in a cross-functional product team (leadership experience in this environment desired).\n- Experience with CATIA/ProE, Matlab/Simulink, and stress analysis tools preferred.\n- Experience with tools used for requirements flow-down / traceability (e.g. DOORS) preferred.\n- Experience with earned values tools preferred\n- Experience with six sigma tools ( e.g. DFMEA, QFD, Crystal Ball simulation, etc.) preferred\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 10+ Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-17 18:12:28", "url": "http://find.eaton.jobs/xml/28762320/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Project Engineer", "reqid": "51155BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 28762320}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Military Customer Service Manager\nAutoReqId 51804BR\nBusiness Function Marketing and Sales\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group Power and Motion Control Division located in Los Angeles,CA has an opening for a Military Customer Service Manager. This position is responsible for managing the sales objectives and activities for our Military customers. In addition, the Military Customer Service Manager is responsible for managing all customer account relations and the programs that revolve around those customer accounts and providing the support required facilitating aftermarket activities, the introduction of products and systems, platform life cycle management, ensure mission readiness and availability and supporting the Product Sales Managers and Regional Account Managers at their customers when needed.\n\nDuties and Responsibilities:\n\n1. Develop, implement and manage marketing strategies to support the Military Sales business plan at the Military accounts. Develop & grow market share, resolve product problems, ensure customer satisfaction. Achieve Aerospace Operations profit plan objectives.\n2. Drive usage of Eaton products in Military platforms. Develop programs and long term agreements to ensure long-term strategic partnerships maintaining established, or increase, market share.\n3. Manage and direct the daily customer service workflow to achieve daily results\n4. Provide leadership for continuous improvement via the High Performance Work Team concepts, Business Process Improvement and Lean deployment. Actively lead and facilitate the improvement efforts.\n5. Interface with key customers to develop and manage relationships. Drive improvement in customer satisfaction. Develop more strategic relationships with key customers\n6. Lead efforts to improve employee engagement and overall satisfaction\n7. Implement the strategic vision for Virtual Customer Service\n8. Manage and resolve customer complaints\nBasic Qualifications (Including Educational Requirements) \u2022 Bachelors Science degree from an accredited institution in Business, Marketing, Operations, or Engineering required\n\u2022 Minimum of 5 years customer service, program management or military experience required\n\u2022 Minimum 2 years\u2019 experience as a manager of people or military leadership required\n\u2022 Must be prequalified to work on defense projects, per the state department ITAR regulations.\n\n\nPosition Criteria:\n\n\u2022 Knowledge of fundamental marketing concepts and strategies.\n\u2022 Knowledge of the aerospace market, Eaton\u2019s customers and competitors\n\u2022 Leadership, teaming, team problem solving, program management, negotiation, and time management skills\n\u2022 Proficient with PC\u2019s and computer software programs including: MS Project, Word, Excel, PowerPoint, MS Outlook, Basic Internet\n\u2022 Understanding of contracts, federal laws, and corporate and project finance\n\u2022 Participates in an atmosphere of continuous improvement through teaming efforts in order to accomplish departmental and facility goals\n\u2022 Works within and support compliance with FAA regulations\n\u2022 Self-starter, results driven individual with strong time management skills and the ability to handle and prioritize multiple tasks\n\u2022 Strong analytical and problem solving skills\n\u2022 Organizational skills and attention to details\n\u2022 Commitment to customer service and satisfaction, quality principles and six-sigma error-free work\n\u2022 Excellent oral and written communication skills with the ability to interact effectively with individuals at all levels within and external to the company\n\u2022 Time management and the ability to prioritize daily tasks\n\n\nPreferred:\n\n\u2022 Aerospace or Military experience preferred\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-05-16 20:18:09", "url": "http://find.eaton.jobs/xml/28739988/job", "country": "United States", "company": "Eaton Corporation", "title": "Military Customer Service Manager", "reqid": "51804BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 28739988}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Subcontract Program Manager\nAutoReqId 51527BR\nBusiness Function Supply Chain\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace located in Los Angeles, CA (near Glendale metro) has an opening for a Subcontract Program Manager.\n\nThe Subcontract Program Manager manages, in a matrix environment, subcontractors of critical components during the development of phase of New Programs. Subcontract Program Management focuses on ensuring Program Management discipline is integrated into the Supply Chain ensuring suppliers meet the program Cost / Schedule / Performance requirements in accordance with the PROLaunch process. This role focuses on the management of the subcontractor versus the subcontract (i.e. management of the supplier versus management of PO deliverables) from Phase 0 Concept thru Phase 6 Transition to Production ensuring maximum supplier involvement from project launch through rate production.\n\nThe successful candidate will be able to do the following:\n\n\u2022 Align the Supply Chain to meet program critical path requirements, ensuring compliance with customer flow-down requirements (offset, DFAR, quality, etc.), and ensuring success of the overall program sourcing strategy.\n\u2022 Develop strong supplier relationship modeling expertise to ensure contractual requirements are met and to support growth of the business relationship between Eaton and the selected subcontractors. Position interfaces through the Program Office, ensuring smooth flow of supply chain processes and complete alignment supplier through customer.\n\u2022 Manages the subcontractor to ensure timely completion of all efforts associated with the project.\n\u2022 Ensures the program selects sources in accordance with the Sourcing Strategy established by the Commodity Leads.\n\u2022 Ensure the supply chain process is fully engaged from RFQ through the various reviews including System Requirements, Preliminary Design, Critical Design, Test Readiness, and Production Readiness.\n\u2022 Understands critical paths with the Eaton prime program (proposal stage, pending win, win, development, test, transition to production) including supplier dependencies and new program awards\n\u2022 Develops and manages project plans, utilizing the Early Sourcing Work Plan (ESWP), necessary to ensure program success\n\u2022 Develops, with support of program team, required Statements Of Work (SOW) and Performance Based Specifications (PBS) on which the award will be based\n\u2022 Leads review of proposal response and prepares team (procurement, technical, quality) to audit potential suppliers\n\u2022 Ensures compliance with applicable contract flow-downs (FAR, DFAR, TINA, etc.)\n\u2022 Evaluates supplier Work Breakdown Structure (WBS) and Project plan for feasibility and sufficient detail to ensure key milestones such as completion of Concept Design, Preliminary Design Review (PDR), Critical Design Review (CDR), Test Readiness Review (TRR), and Production Readiness Review (PRR) are scheduled and completed to the program plan\n\u2022 Establishes Risk Management plan with the Program Manager and Supply base to identify and mitigate risks on a real time basis\n\u2022 Technically astute to effectively interface with supplier, program office, customer, etc.\n\u2022 Establishes the Supply Chain Integrated Product Team (IPT) consisting of Commodity Leads (sourcing), site buyers (Procurement), and Supplier Development Engineers (APQP), from both Eaton and the suppliers. This team conducts periodic Technical Interchange Meetings (TIM) to track progress between milestones.\n\u2022 Vision (looking forward) to see total scope of Program progress and able to move the subcontractor along as necessary to keep progress moving (e.g. vision within Sourcing to detect other critical path processes that could impact subcontractor processes such as another supplier)\n\u2022 Utilizes the TIM and IPT to ensure supplier utilizes best practice Design to Cost (DTC), Advanced Product Quality Planning (APQP), and Design for Manufacture / Assembly (DFA/M) methodology to achieve best Quality / Cost / Schedule performance.\n\nPosition Criteria:\n- Proven capability to lead change in a team environment.\n- Ability to manage multiple projects/activities.\n- Broad knowledge of product and manufacturing process.\n- Excellent communication and interpersonal skills.\n- Strong project management and process improvement skills.\n- Detail oriented.\n\nPreferred Qualifications:\n- MBA preferred.\n- Experience in an Aerospace environment, metal fabrication, electronics, purchasing, and materials management positions a plus.\n- CPIM, CSCP, and/or PMP certification desired.\n- Background and knowledge in/or Enovia (product life cycle management), Oracle, MFG/Pro, Cognos and other equivalent ERP / MRP software packages.\nBasic Qualifications (Including Educational Requirements) \u2022 Bachelor\u2019s Degree in Business, Economics, Supply Chain Management or Engineering.\n\u2022 Minimum of 5 years of experience in Supply Chain, Program Management or Contracts.\n\u2022 Candidates must be prequalified to work on defense projects, per the state department ITAR regulations\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 25 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-05-04 20:13:15", "url": "http://find.eaton.jobs/xml/28445347/job", "country": "United States", "company": "Eaton Corporation", "title": "Subcontract Program Manager", "reqid": "51527BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 28445347}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Quality Engineer\nAutoReqId 51598BR\nBusiness Function Quality\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Sr. Quality Engineer. Responsible for performing Quality Engineering duties related to support of hydraulic products fabrication, assembly, and test.\n\nDuties and Responsibilities:\n\nAssessing and developing internal capabilities in compliance with management, customer and agency goals and objectives.\nDeveloping and improving system and process performance feedback using trend, Pareto and other quality tools.\nLeading cross-functional teams in solving chronic system problems or product nonconformances.\nProviding a customer interface with respect to quality issues.\nControlling nonconforming material in accordance with Eaton procedures.\nFlowing down of external/internal quality requirements to all functions.\nPerforming verification and validation of new designs using compliance matrices, 1st articles, capability studies, DFMEA and PFMEA to ensure compliance to customer requirements and producibility standards.\nProviding technical direction to Internal Auditors to verify compliance Eaton requirements.\nDeveloping advanced quality planning with respect to Eaton and customer requirements. Ensuring compliance with quality requirements in product development gate review meetings.\nSupporting and leading continuous improvement initiatives.\nSupporting the development of test fixtures, inspection fixtures, and determination of gaging needs.\nSupporting internal audit requirements in accordance with Eaton procedures.\nDeveloping and maintaining quality work instructions and procedures.\nAchieving objectives as detailed by Quality Management.\n\nPreferred Qualifications:\n\nPreferred experience in Aerospace electromechanical or hydraulic systems required.\n\nExperience with FRACAS and reliability reporting is a plus.\nExperience in contract review, Quality Planning, failure analysis and corrective action.\nFamiliar with major Aerospace primes Quality System, as well as working knowledge of AS9100. Working knowledge of Six Sigma tools.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nMinimum of 2 years Quality Engineering experience working with quality systems.\n\n\nBachelors Degree in Engineering or Business.\n\nThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\nAt this time, relocation assistance is not available for this position. Only candidates in the immediate geographic area (50 mile radius) will be considered.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-05-02 19:28:41", "url": "http://find.eaton.jobs/xml/28334743/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Quality Engineer", "reqid": "51598BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 28334743}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Lead Analyst-Program Finance\nAutoReqId 51052BR\nBusiness Function Finance/Accounting\nDivision Hydraulics Systems Division\nJob Description Eaton Corporation\u2019s Power and Motion Controls Division of Eaton Aerospace, has an opening for a Lead Analyst-Program Finance. The position is located in Los Angeles, CA.\n\nThis position drives improved new development program execution by providing critical support to the program management organization. This position serves as a business partner to the program management and engineering functions for the Power and Motion Control Division. Additionally, this position supports the continuous improvement of the program finance and control functions at the division level.\n\nThe successful candidate will be able to perform the following essential functions:\n\n-Calculates, reports, and interprets BOS, schedule, and financial performance by program to program managers, engineering managers, and functional leaders.\n\n-Drives improved program execution by establishing meaningful metrics, identifying necessary achievement levels, and providing gap closure tools.\n\n-Routinely compiles EAC (Estimate At Complete) calculations, based on actual performance and forecasted costs, to monitor profitability and ensure accurate accounting. Assists engineering and program management in identifying risks and implementing mitigating plans.\n\n-Maintains new program development project schedules in a dynamic environment. Serves as backup PWA administrator.\n\n-Develops and implements program finance and program management processes to ensure control, compliance, and improved program execution. Benchmark and incorporate best practices.\n\n-Supports proposal management and execution. Baselines new development programs after award.\n\n-Supports preparation of annual profit plans and monthly rolling forecasts for all major programs based on resource loaded schedules and anticipated non-labor costs.\n\n-Supports the Division Program Controller as required\n\nPosition Criteria:\n-Highly developed computer skills including the MS Office software suite.\n-Proven leadership skills. Must be able to drive change.\n-Advanced problem solving and analytical skills.\n-Robust organizational and planning skills. Must be able to manage multiple initiatives.\n-Strong verbal, written, and interpersonal communication skills, with the ability to establish cross-functional relationships.\nBasic Qualifications (Including Educational Requirements) -Bachelor\u2019s Degree in Finance, Accounting, Program Management or Business Administration\n\n- Minimum of 5 years experience in accounting, finance or program management\n- Must be prequalified to work on defense projects, per the state department ITAR regulations\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 25 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-04-26 19:07:05", "url": "http://find.eaton.jobs/xml/28205397/job", "country": "United States", "company": "Eaton Corporation", "title": "Lead Analyst-Program Finance", "reqid": "51052BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 28205397}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Assembler B - Ist Shift\nAutoReqId 51246BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group Power and Motion Control Division located in Los Angeles, CA (near Glendale metro) has an opening for an Assembler B - Ist shift position. Responsible for assembling hydraulic and/or pneumatic and electronic components as specified in applicable documents with minimal supervision.\n\nDuties and Responsibilities:\n\n1. Operates in team environment\n2. Ability to read blueprints\n3. Follow and complete process documentation\n4. Report labor in MRP system\n5. Ability to perform lockwire/safety wire and nameplate if applicable.\n6. Inspect accuracy of documentation.\n7. Uses hand bench and power tools and measuring instruments.\n8. Assembles sub-assemblies and basic valve assemblies.\n9. Laps all required surfaces with proper tooling techniques and compounds.\n10. Work with minimal supervision.\n11. Complies with Eaton standard policies and procedures.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School Diploma\nNo minimum experience required.\nAbility to read and write English\nMust be prequalified to work on defense projects, per the state department ITAR regulations.\n\n\n\nPreferred Qualifications:\n\nMinimum 2 years experience in Aerospace or Hydraulics.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel No Minimum Experience Required\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-19 10:55:31", "url": "http://find.eaton.jobs/xml/28002570/job", "country": "United States", "company": "Eaton Corporation", "title": "Assembler B - Ist Shift", "reqid": "51246BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 28002570}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Assembler and Tester A - 2nd shift\nAutoReqId 51243BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group Power and Motion Control Division located in Los Angeles, CA (near Glendale metro) has an opening for an Assembler and Tester A (2nd shift) position. Responsible for assembling and testing hydraulic and/or pneumatic and electronic components as specified in applicable documents with little or no supervision.\n\nDuties and Responsbilities:\n\n1. Operates in team environment\n2. Ability to read blueprints\n3. Follow and complete process documentation\n4. Report labor in MRP system\n5. Inspect accuracy of documentation.\n6. Uses hand bench and power tools and measuring instruments, including transducers, oscilloscopes, virtual instruments and test boxes.\n7. Assembles and disassembles and tests basic and complex sub-assemblies and valve assemblies.\n8. Laps all required surfaces with proper tooling techniques and compounds.\n9. Work with little or no supervision.\n10. Complies with Eaton standard policies and procedures.\n11. Able to perform root cause analysis and fault isolation.\n12. Rejects and reports discrepant materials.\n13. Ability to identify and communicate basic documentation issues.\n14. Requires a high degree of skill in assembly and test technique, plus extensive experience and knowledge of electrical, hydraulic, and mechanical principles.\n15. Ability to assist less experienced technicians.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School Diploma\nMinimum 4 years experience in hydraulic assembly and test required.\nAbility to read and write English.\nMust be prequalified to work on defense projects, per the state department ITAR regulations\n\n\n\nPreferred Qualifications:\n\n5 plus years experience in Aerospace.\nSolder certification\nESD certification\nExperience working in FAA environment.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 4 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-18 21:06:07", "url": "http://find.eaton.jobs/xml/27985365/job", "country": "United States", "company": "Eaton Corporation", "title": "Assembler and Tester A - 2nd shift", "reqid": "51243BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27985365}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Assembler B - 2nd shift\nAutoReqId 51248BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group Power and Motion Control Division located in Los Angeles, CA (near Glendale metro) has an opening for an Assembler B - 2nd shift position. Responsible for assembling hydraulic and/or pneumatic and electronic components as specified in applicable documents with minimal supervision.\n\nDuties and Responsibilities:\n\n1. Operates in team environment\n2. Ability to read blueprints\n3. Follow and complete process documentation\n4. Report labor in MRP system\n5. Ability to perform lockwire/safety wire and nameplate if applicable.\n6. Inspect accuracy of documentation.\n7. Uses hand bench and power tools and measuring instruments.\n8. Assembles sub-assemblies and basic valve assemblies.\n9. Laps all required surfaces with proper tooling techniques and compounds.\n10. Work with minimal supervision.\n11. Complies with Eaton standard policies and procedures.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School Diploma\nNo minimum experience required.\nAbility to read and write English\nMust be prequalified to work on defense projects, per the state department ITAR regulations.\n\n\n\nPreferred Qualifications:\n\nMinimum 2 years experience in Aerospace or Hydraulics.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel No Minimum Experience Required\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-18 21:01:18", "url": "http://find.eaton.jobs/xml/27985234/job", "country": "United States", "company": "Eaton Corporation", "title": "Assembler B - 2nd shift", "reqid": "51248BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27985234}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Assembler and Tester A - 2nd shift\nAutoReqId 51244BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group Power and Motion Control Division located in Los Angeles, CA (near Glendale metro) has an opening for an Assembler and Tester A (2nd shift) position. Responsible for assembling and testing hydraulic and/or pneumatic and electronic components as specified in applicable documents with little or no supervision.\n\nDuties and Responsbilities:\n\n1. Operates in team environment\n2. Ability to read blueprints\n3. Follow and complete process documentation\n4. Report labor in MRP system\n5. Inspect accuracy of documentation.\n6. Uses hand bench and power tools and measuring instruments, including transducers, oscilloscopes, virtual instruments and test boxes.\n7. Assembles and disassembles and tests basic and complex sub-assemblies and valve assemblies.\n8. Laps all required surfaces with proper tooling techniques and compounds.\n9. Work with little or no supervision.\n10. Complies with Eaton standard policies and procedures.\n11. Able to perform root cause analysis and fault isolation.\n12. Rejects and reports discrepant materials.\n13. Ability to identify and communicate basic documentation issues.\n14. Requires a high degree of skill in assembly and test technique, plus extensive experience and knowledge of electrical, hydraulic, and mechanical principles.\n15. Ability to assist less experienced technicians.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School Diploma\nMinimum 4 years experience in hydraulic assembly and test required.\nAbility to read and write English.\nMust be prequalified to work on defense projects, per the state department ITAR regulations.\n\n\nPreferred Qualifications:\n\n5 plus years experience in Aerospace.\nSolder certification\nESD certification\nExperience working in FAA environment.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 4 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-18 21:01:04", "url": "http://find.eaton.jobs/xml/27985230/job", "country": "United States", "company": "Eaton Corporation", "title": "Assembler and Tester A - 2nd shift", "reqid": "51244BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27985230}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Assembler and Tester A - 2nd shift\nAutoReqId 51242BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group Power and Motion Control Division located in Los Angeles, CA (near Glendale metro) has an opening for an Assembler and Tester A (2nd shift) position. Responsible for assembling and testing hydraulic and/or pneumatic and electronic components as specified in applicable documents with little or no supervision.\n\nDuties and Responsbilities:\n\n1. Operates in team environment\n2. Ability to read blueprints\n3. Follow and complete process documentation\n4. Report labor in MRP system\n5. Inspect accuracy of documentation.\n6. Uses hand bench and power tools and measuring instruments, including transducers, oscilloscopes, virtual instruments and test boxes.\n7. Assembles and disassembles and tests basic and complex sub-assemblies and valve assemblies.\n8. Laps all required surfaces with proper tooling techniques and compounds.\n9. Work with little or no supervision.\n10. Complies with Eaton standard policies and procedures.\n11. Able to perform root cause analysis and fault isolation.\n12. Rejects and reports discrepant materials.\n13. Ability to identify and communicate basic documentation issues.\n14. Requires a high degree of skill in assembly and test technique, plus extensive experience and knowledge of electrical, hydraulic, and mechanical principles.\n15. Ability to assist less experienced technicians.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School Diploma\nMinimum 4 years experience in hydraulic assembly and test required.\nAbility to read and write English.\nMust be prequalified to work on defense projects, per the state department ITAR regulations.\n\n\n\n\n\nPreferred Qualifications:\n\n5 plus years experience in Aerospace.\nSolder certification\nESD certification\nExperience working in FAA environment.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 4 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-18 20:59:43", "url": "http://find.eaton.jobs/xml/27985186/job", "country": "United States", "company": "Eaton Corporation", "title": "Assembler and Tester A - 2nd shift", "reqid": "51242BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27985186}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Machine Operator\nAutoReqId 51186BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles CA (near Glendale metro) has an opening for a Machine Operator -2nd shift.\n\nDuties and Responsibilities:\n\nInspects parts for quality and appropriate tolerance using the appropriate measuring tools such as micrometers, calipers, air gages and comparators.\n\nInterprets specifications and blueprints, holding close tolerances, inspection and acceptance of parts as a certified operator.\n\nPerforms first article inspection and in-process quality checks.\n\nRequires use of all common fabrication equipment and inspection tooling/gauges.\n\nOptimizes production by performing secondary work such as running multiple machines, deburring, vibratory, and any hand work as well as preparing for the next job, organizing and cleaning the cell, and performs preventive maintenance and?helping others while machines are running.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School Diploma required.\nSome experience in machining, deburring, honing or lapping aerospace parts preferred.\nAbility to lift up to 50 pounds often.\nMust be prequalified to work on defense projects, per the state department ITAR regulations.\n\n\nPosition Criteria:\n\nFamiliar with machines tools, production methods and shop practices preferred.\nAbility to learn equipment and processes for fabrication of aerospace parts, produce parts in accordance with the production plans, sketches and/or verbal instructions. Ability to maintain close tolerance dimensions on critical parts.\nKnowledge of dimensional measuring instrumentations and use of such tools to verify actual measurements of machined dimensions and features.\nAbility to read and interpret drawings, sketches, manufacturing routings, procedures, and routers.\nGood verbal and written communication skills a must.\nFamiliarity with SPC principles and methods.\nAbility to logically solve problems and to keep assignments and projects moving in an orderly and structured fashion.\nTraining possible for this position.\n\nPreferred Qualifications:\n\nInvolvement in successful process definition and re-engineering.\nExperience in employee involvement in multi-discipline teaming.\nProficiency with computer based methods and tools.\nFamiliarity /experience with Lean Manufacturing, Kaizen events, and continuous improvement and Six Sigma methodology.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 1 Year\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-16 19:42:56", "url": "http://find.eaton.jobs/xml/27928327/job", "country": "United States", "company": "Eaton Corporation", "title": "Machine Operator", "reqid": "51186BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27928327}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Quality Engineer\nAutoReqId 51007BR\nBusiness Function Quality\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Sr. Quality Engineer. Responsible for performing Quality Engineering duties related to support of hydraulic products fabrication, assembly, and test.\n\nDuties and Responsibilities:\n\nAssessing and developing internal capabilities in compliance with management, customer and agency goals and objectives.\nDeveloping and improving system and process performance feedback using trend, Pareto and other quality tools.\nLeading cross-functional teams in solving chronic system problems or product non-conformance.\nProviding a customer interface with respect to quality issues.\nControlling nonconforming material in accordance with Eaton procedures.\nFlowing down of external/internal quality requirements to all functions.\nPerforming verification and validation of new designs using compliance matrices, 1st articles, capability studies, DFMEA and PFMEA to ensure compliance to customer requirements and standards.\nProviding technical direction to Internal Auditors to verify compliance Eaton requirements.\nDeveloping advanced quality planning with respect to Eaton and customer requirements. Ensuring compliance with quality requirements in product development gate review meetings.\nSupporting and leading continuous improvement initiatives.\nSupporting the development of test fixtures, inspection fixtures, and determination of gauging needs.\nSupporting internal audit requirements in accordance with Eaton procedures.\nDeveloping and maintaining quality work instructions and procedures.\nAchieving objectives as detailed by Quality Management.\n\nPreferred Qualifications:\n\nPreferred experience in Aerospace electromechanical or hydraulic systems required.\n\nExperience with FRACAS and reliability reporting is a plus.\nExperience in contract review, Quality Planning, failure analysis and corrective action.\nFamiliar with major Aerospace primes Quality System, as well as working knowledge of AS9100. Working knowledge of Six Sigma tools.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nMinimum of 5 years Quality Engineering experience working with quality systems.\n\n\nBachelors Degree in Engineering or Business.\n\nThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\nAt this time, relocation assistance is not available for this position. Only candidates in the immediate geographic area (50 mile radius) will be considered.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-04-10 03:29:21", "url": "http://find.eaton.jobs/xml/27774941/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Quality Engineer", "reqid": "51007BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27774941}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Assembler and Tester A\nAutoReqId 50515BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group Power and Motion Control Division located in Los Angeles, CA (near Glendale metro) has an opening for an Assembler and Tester A. Responsible for assembling and testing hydraulic and/or pneumatic and electronic components as specified in applicable documents with little or no supervision.\n\nDuties and Responsibilities:\n\n1. Operates in team environment\n2. Ability to read blueprints\n3. Follow and complete process documentation\n4. Report labor in MRP system\n5. Inspect accuracy of documentation.\n6. Uses hand bench and power tools and measuring instruments, including transducers, oscilloscopes, virtual instruments and test boxes.\n7. Assembles and disassembles and tests basic and complex sub-assemblies and valve assemblies.\n8. Laps all required surfaces with proper tooling techniques and compounds.\n9. Work with little or no supervision.\n10. Complies with Eaton standard policies and procedures.\n11. Able to perform root cause analysis and fault isolation.\n12. Rejects and reports discrepant materials.\n13. Ability to identify and communicate basic documentation issues.\n14. Requires a high degree of skill in assembly and test technique, plus extensive experience and knowledge of electrical, hydraulic, and mechanical principles.\n15. Ability to assist less experienced technicians.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School Diploma\nMinimum 4 years experience in hydraulic assembly and test required.\nAbility to read and write English\n\n\nPreferred Qualifications:\n\n5 plus years experience in Aerospace.\nSolder certification\nESD certification\nExperience working in FAA environment.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 4 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-29 01:30:49", "url": "http://find.eaton.jobs/xml/27476026/job", "country": "United States", "company": "Eaton Corporation", "title": "Assembler and Tester A", "reqid": "50515BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27476026}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Product Sales Manager\nAutoReqId 49969BR\nBusiness Function Marketing and Sales\nDivision Aerospace Division\nJob Description Eaton Corporation - Aerospace Group is has an opening for a Product Sales Manager based out of our Los Angeles, CA location. This role will primarily be responsible to identify, develop and close sales opportunities for an assigned product family.\n\nNo relocation is offered with this position. Only candidates within a 50 mile radius or reasonable commuting distance of Los Angeles, CA, will be considered.\n\nPrimary Responsibilities include:\n\nA. Support the new business capture process for AM and OEM Growth Platform opportunities as assigned by the Division Product Sales Manager (DPSM)\nB. Identify and develop new sales opportunities for Short Term Enterprise Profit (STEP) initiatives, upgrades, retrofits, and AM campaigns working in conjunction with the RAM & MAT/CAT (Field Sales) teams for the assigned Product Family\nC. Develop win strategies through effective execution of Eaton\u2019s value cycle tools and processes\nD. Lead the product family capture team through the new business proposal development process and AM campaigns for the assigned Product Family\nE. Present the Eaton Value Proposition to the customer ensuring that the capture team secures maximum value for Eaton on awarded programs\nF. Ensure effective management of sales opportunities through each stage of the selling cycle; identify decision makers, coaches, users, technical buyers, and potential blockers ensuring their needs are met - that will result in increased wins\nG. Improve customer satisfaction through effective deployment of the CRR tools and process; support the interview process and closing resulting action items as assigned\nH. Develop intake forecast and work with the momentum team to meet annual intake objectives are achieved\nI. Increase aftermarket sales performance by supporting the CAT Teams; provide the required leadership, tool kits, and campaign materials at the product family to bring upgrade and retrofit initiatives to market\nJ. Coordinate closely with the Product Family technical community and utilize strong product line knowledge when interfacing the customer\nK. Support the Eaton capture team process as assigned when working on key platform opportunities\nL. Champion for Eaton Business Excellence (EBE), Strategic Planning, and Profit Planning\nBasic Qualifications (Including Educational Requirements) \u2022 Bachelor of Science degree in Engineering, Marketing or Business from an accredited institution required\n\u2022 Minimum of 5 years of product sales experience in Aerospace, Military/Defense or Civil Aircraft industry required.\n\u2022 Must be legally authorized to work for any employer in the U.S. without sponsorship.\n\u2022 No relocation is offered with this position. Only candidates within a 50 mile radius or reasonable commuting distance of Los Angeles, CA, will be considered.\n\n\nPosition Criteria:\n\nA. Strong technical knowledge and application related understanding of Hydraulic Products including pumps, motors, and subcomponents typically incorporated in a hydraulic system, tubing and other related products.\nB. Must have ability to be effective in managing a number of proposal and sales pipeline opportunities\nC. Relationship Management skills\nD. Strong Business Acumen.\nE. Strong oral and written communication skills.\nF. Effective in managing a number of proposals and sales pipeline opportunities.\n\n\nPreferred:\n\n\u2022 Prefer MBA degree\n\u2022 Prefer ability to accomplish challenging goals and objectives year over year\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 50 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-24 18:51:25", "url": "http://find.eaton.jobs/xml/27370746/job", "country": "United States", "company": "Eaton Corporation", "title": "Product Sales Manager", "reqid": "49969BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27370746}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Project Engineer\nAutoReqId 50005BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Project Engineer. This position will lead an engineering team performing conceptual design, development and qualification of hydraulic valves, actuators and reservoirs for various commercial and military applications, including nose wheel steering, landing gear control, general aircraft hydraulic systems. Successful candidates will be able to independently lead a major project from initial design conception through the design phases, up to and including qualification and transition to production. The position requires the use of six sigma tools to ensure project success and may involve use of some earned value tools.\n\nDuties and Responsbilities:\n\n1. Lead teams engaged in any or all of the activities below. Provide mentorship, technical advice, and oversight to component design engineers locally and at other Eaton or vendor sites, locally and globally.\n2. Estimate labor/material budgets for new and scope change proposals. Establish design-to-cost (DTC) models and track configurations to DTC compliance per company practices.\n3. Establish technical work breakdown structures and budget estimates in conjunction with Program Management and Engineering Resource Managers. Manage progress to engineering task plans and schedules through the project, including variance analysis of earned value metrics as appropriate.\n4. Develop appropriate allocations, and design margin strategy, of system requirements to component attributes including derived characteristics. Assist in review and refinement of system or component specifications. Develop and maintain specification compliance data throughout the product development life cycle.\n5. Lead component development by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other engineers. Apply engineering knowledge and 3D modeling skills to develop designs compliant with internal and external standard practices.\n6. Develop, execute, and manage a risk management plan including risk mitigation tasks. Solve technical problems with products and designs; drive teams to efficiently and effectively execute problem solving assignments.\n7. Lead the team in utilizing six sigma tools (especially design for six sigma) to ensure that critical to quality measures are defined and tracked through the design and validation process. Conduct reviews to ensure that design variability and process capability are understood and defined in design documentation.\n8. Prepare technical presentations for internal and external customers, including preliminary/critical design reviews and other reviews as required.\n9. Participate in and lead meetings with the customer and other engineers, distributing the results to the development team and coordinating actions as necessary. Ensure information flow within the local Eaton team, with other Eaton sites (locally and globally), and contractor teams as appropriate to facilitate work flow, efficiency and quality of work results delivered to the customer\n10. Prepare or approve SDRL documents, including analysis reports, certification reports etc.\n11. Participate in the component/system qualification process in conjunction with the Eaton and outside test laboratories.\n12. Perform other duties as assigned.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\n- Bachelor of Science Degree in Engineering from an accredited institution is required.\n- Minimum 5 years of engineering experience in an Aerospace, Automotive, or Medical Device environment.\n- This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\n\nPosition Criteria:\n\n- Ability to understand system and customer specifications, layouts and functions, and the interfaces to other platform systems.\n- Familiarity with manufacturing and ability to work closely with manufacturing engineers to make use of process capability data in design.\n- Good written, oral and presentation skills, leadership qualities and the ability to work well with customers and development team members.\n\n\nPreferred Qualifications:\n\n- 2 years of project management/engineering experience in a cross-functional product team\n- Experience with aircraft component development (experience with valves, landing gear, and hydraulic components)\n- Experience with CATIA/ProE, Matlab/Simulink, and stress analysis tools\n- Experience with tools used for requirements flow-down / traceability (e.g. DOORS)\n- Experience with earned values tools\n- Experience with six sigma tools ( e.g. DFMEA, QFD, Crystal Ball simulation, etc.)\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-03-15 22:58:56", "url": "http://find.eaton.jobs/xml/27180615/job", "country": "United States", "company": "Eaton Corporation", "title": "Project Engineer", "reqid": "50005BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27180615}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Mechanical Engineer\nAutoReqId 50119BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace located in Los Angeles, CA (near Glendale metro) has an opening for a Mechanical Engineer. This position is responsible for the design and release of engineering solutions for aerospace fluid power and control components. The role requires the ability to apply sound engineering principles in the development and support of mechanical and electro-mechanical products through the new product development (NPD) life-cycle. A successful candidate would be able to work as part of an integrated product team to take a design from conception to qualified production hardware. Opportunities also include involvement in proposal and production support activity.\n\nDuties and Responsibilities:\n\nA. Develop new and modified engineering designs or component specifications to meet product requirements for NPD programs.\nB. Utilize solid modeling programs (CAD) in developing component and assembly designs.\nC. Create engineering drawings and technical documentation in accordance with industry standards. (ASME Y14.5, AMSE Y14.34)\nD. Define test procedures and setups for development, acceptance, and qualification testing.\nE. Perform and characterize tolerance analysis through stack-up calculations and/or utilizing statistical methods.\nF. Perform basic structural, thermal, dynamic, and performance analysis for preliminary design validation.\nG. Apply knowledge of design principles (Design for Six Sigma, Design for Manufacturability) in developing robust engineering solutions.\nH. Conduct failure analysis through a formal methodology (8D) to determine root cause and corrective action.\nI. Ensure compliance with design standards and engineering processes.\nJ. Interface with internal and external customers to address technical matters as needed.\nK. Perform other duties as assigned.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\n- Bachelor's degree in Mechanical or Aerospace Engineering from an accredited institution\n- 3 years of mechanical engineering experience utilizing 3D CAD\n- Candidate must be legally authorized to work in United States without company sponsorship.\n\nPosition Criteria:\n\n- Ability to perform basic structural and/or performance analysis. FEA/Simulation experience.\n- Good technical writing, communication, and presentation skills.\n\n\nPreferred Qualifications:\n\n- Experience with Pro/Engineer\n- Knowledge of manufacturing processes and material selection for engineering design.\n- Working knowledge of Design for Six Sigma (DFSS), Design for Manufacturability (dfM), Failure Modes and Effects Analysis (FMEA), Design of Experiments (DOE) principles.\n- Experience with hydraulic, pneumatic, or electromechanical products\n- Experience with working on cross-functional teams.\n- Experience in the Aerospace Industry\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 3 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-03-14 18:13:31", "url": "http://find.eaton.jobs/xml/27135218/job", "country": "United States", "company": "Eaton Corporation", "title": "Mechanical Engineer", "reqid": "50119BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27135218}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Supplier Quality Engineer\nAutoReqId 48727BR\nBusiness Function Quality\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group in Los Angeles, CA (near Glendale, CA metro) has an opening for a Supplier Quality Engineer. The candidate is responsible for driving supplier improvement in the areas of Quality, Delivery and Lean Manufacturing initiatives. The improvements must be consistent with Eaton Aerospace requirements.\n\nDuties and Responsibilities:\n\nOversees and participates in the development and initiation of inspection, testing and evaluation techniques for incoming goods.\nWorks with Production, Quality Assurance Materials and other departments to label and define quality standards and procedures.\nReviews and analyzes inspection test results and oversees the disposition of unaccepted items with affected suppliers and companies.\nWorks with Quality Assurance to ensure the consistent application of tests and inspections.\nAnalyzes supplier performance both in-house on supplier premises as required.\nApplies standard statistical techniques to analyze and evaluate studies.\nTeam with suppliers to define and document Process Control Plans and Inspection plans.\nWork with suppliers to find equitable solutions to problems indentified.\nVisits supplier locations to assist purchasing personnel with evaluating supplier quality standards and processes.\nAnswers technical questions regarding commodity quality, long-term feasibility or quality certifications.\nOversees and participates in the development, implementation, and evaluation of quality system surveys which identify supplier characteristics.\nDevelops and presents recommendations based on results.\nCommunicates with appropriate personnel regarding significant changes.\n\nPREFERRED QUALIFICATIONS:\nExperience with complex machining suppliers\nExposure working with aerospace suppliers.\nExperience with Special processes suppliers (Heat Treating, Plating, Painting)\nExperience with Aerospace Suppliers\n\nPOSITION CRITERIA:\nExperience with Supplier Correction Actions and Nonconforming Material Dispositions, MRB\nExperience with Supplier Audits, Supplier Inspection Plans\nWillingness to travel locally and nationally to supplier sites\nBasic Qualifications (Including Educational Requirements) BASIC QUALIFICATIONS:\nBachelors Degree in Engineering from accredited institution.\n\nMinimum 2 years of Quality Engineering.\n\nThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n-At this time, relocation assistance is not available for this position. Only candidates in the immediate geographic area (50 mile radius) will be considered.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 2 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-03-14 00:43:49", "url": "http://find.eaton.jobs/xml/27118360/job", "country": "United States", "company": "Eaton Corporation", "title": "Supplier Quality Engineer", "reqid": "48727BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 27118360}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Manufacturing Engineering Supervisor\nAutoReqId 49362BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Manufacturing Engineering Supervisor. Primary responsibility includes providing supervision and technical leadership to the manufacturing engineering team supporting development and production programs for fluid control and actuation products. The team is responsible for the development and continuous improvement of processes, tooling, and equipment for various military and commercial programs. A successful candidate would be able to lead a team in meeting the day-to-day program and production deliverables, while implementing larger scope initiatives for process improvement and cost reduction.\n\n\nDuties and Responsibilities:\n\nA. Own new product launch deliverables through all gates of ProLaunch including production transition. Specifically ensure design for manufacturability and design to cost targets are achieved by active participation in DFMEA, PFMEA and process error proofing techniques.\nB. Develop and implement processes to improve troubleshooting production issues related to product non-conformance and performance test failures for hydraulic, pneumatic, and electro-mechanical products. Specifically monitor and support the elimination of daily variation to TAKT rate output.\nC. Focus efforts of the manufacturing engineering team on meeting factory productivity cost out objectives. Specifically drive positive standard labor variance and favorable variable manufacturing expense variance through the use of ELSS tools and design to cost initiatives.\nD. Drive utilization of a problem solving methodology (DOE, 8-D, A-3) in the manufacturing engineering team to define true root cause and process prevention based corrective action.\nE. Improve implementation of Lean Manufacturing principles and utilization of Six Sigma methodologies to develop and maintain robust manufacturing processes in order to increase productivity, reduce variation, eliminate waste, and minimize assembly and test cycle times.\nF. Serves as the team representative, focal point, and leader to all internal and external customers.\nG. Works collaboratively on a cross-functional team to execute projects on time in meeting program and production deliverables.\nH. Defines and manages capital base to support current, future and cost savings objectives.\nI. Prepare and manage project budgets, schedules, and resource plans.\nJ. Insure compliance with Environmental, Safety, and Health (MESH), ISO, and other industry standards.\nBasic Qualifications (Including Educational Requirements) Basic Qualification:\n\nBachelor's Degree in Engineering from an accredited institution is required.\n\nMinimum 5 years of manufacturing engineering experience is required.\n\nMinimum 3 years of leadership experience is required.\n\nMinimum 1 year experience with lean manufacturing/continuous improvement activities is required.\n\nMust be legally authorized to work in the United States without company sponsorship.\n\nPosition Criteria:\n\nGood technical writing, communication, and presentation skills.\nProficiency with computer based methods and tools.\n\n\nPreferred Qualifications:\n\nExperience in Lean Manufacturing, Kaizen events, and continuous improvement techniques.\nFamiliarity/experience with Six Sigma & Problem Solving methodologies\nExperience with working on cross-functional teams.\nFamiliarity with SPC principles and methods\nWorking knowledge of ISO-9001.\nExperience with hydraulic, pneumatic, or electromechanical products, a plus.\nPrior experience within the Aerospace Industry\nPrevious supervisory experience.\nPrior experience in project management.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-02-27 18:53:21", "url": "http://find.eaton.jobs/xml/26784066/job", "country": "United States", "company": "Eaton Corporation", "title": "Manufacturing Engineering Supervisor", "reqid": "49362BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 26784066}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Manufacturing Engineer\nAutoReqId 49174BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace located in Los Angeles, CA (near Glendale metro) has an opening for a Sr. Manufacturing Engineer. Primary responsibilities include the processes, tooling, and equipment to support the production of the fluid controls and actuation product line. The position requires the ability to provide technical support and implement Lean Manufacturing principles in a production environment. Candidate should have the ability to address technical issues through a problem solving framework with a focus on root cause, containment, and long term solutions.\n\nThe essential functions include the following:\nA. Implement Lean Manufacturing principles and utilize Six Sigma methodologies to develop and maintain robust manufacturing processes in order to increase productivity, reduce variation, and eliminate waste.\nB. Utilize technical skills to troubleshoot and resolve issues related to product non-conformance and performance test failures for hydraulic, pneumatic, and electro-mechanical products.\nC. Perform root cause and correction action for manufacturing issues by utilizing problem solving tools such as 8D analysis and PFMEA\u2019s.\nD. Identify, analyze, and implement cost reduction and productivity improvement projects in a production environment.\nE. Ability to work on a cross-functional team to execute projects and ensure internal and external customer satisfaction.\nF. Serve as a technical focal point to operators, team leaders, and other engineers.\nG. Develop process plans, fixtures, and tooling in support of Continuous Improvement Processes.\nH. Research, recommend, and execute capital equipment projects.\nI. Ensure processes meet Environmental, Safety, and Health (MESH) & regulatory requirements\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Bachelor's degree in Engineering from an accredited institution is required.\n- Minimum five years experience in a manufacturing environment is required.\n- This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n-At this time, relocation assistance is not available for this position. Only candidates in the immediate geographic area (50 mile radius) will be considered.\n\nPosition Criteria:\n\u2022 Experience with assembly and test operations of hydraulic, pneumatic, or electro-mechanical products.\n\u2022 Experience in Lean Manufacturing, Kaizen or other Continuous Improvement Processes.\n\u2022 Experience with MRP systems.\n\u2022 Familiarity/experience with Six Sigma & Problem Solving methodologies\n\u2022 Experience with working on cross-functional teams.\n\u2022 Good technical writing, communication, and presentation skills.\n\u2022 Proficiency with computer based methods and tools.\n\nPreferred:\n-Previous aerospace experience\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-02-07 21:25:00", "url": "http://find.eaton.jobs/xml/26379277/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Manufacturing Engineer", "reqid": "49174BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 26379277}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Senior Hydraulic Systems Engineer\nAutoReqId 48643BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace's Hydraulic Systems Division has an opening for a Senior Systems Engineer.\n\nThis position requires knowledge and experience of system engineering including design and integration of hydraulic power generation, distribution, and actuation sub systems architectures for aircraft applications. Skills involve recognizing customer performance needs along with meeting certification requirements for various global commercial and military aerospace applications.\nSuccessful candidates will be able to independently lead an engineering team for a major project from initial conception through each of the design and development phases, up to and including aircraft flight certification.\n\nWork assignments may be varied and challenging and involve complete responsibility of the design and qualification of a hydraulic system, as well as oversight into the responsibilities of less senior engineers. It is expected that this engineer would not need any day-to-day guidance when dealing with technical issues, and they must be self-directed as regards to the ownership and management of their tasks and schedules. Originality and ingenuity are required.\n\nOver 50% travel may be required. The individual must be able to temporarily relocate to any global customer location for extended periods of three to six months.\n\n1. Ability to define a hydraulic system architecture including redundancy / backup systems through trade studies that optimize system reliability, weight and cost. Implied with this skill is adequate knowledge of the following with the ability to adeptly discuss these subjects and their implications with customers:\n- FAA regulations (including Advisory Circulars) and SAE Technical Standards that influence hydraulic system requirements and capabilities;\n- Fault Tree and System Safety Analysis;\n- Environmental requirements as they apply to military and commercial applications\n2. Ability to understand aircraft hydraulic system level specifications, aircraft system layouts, interfaces with other aircraft systems.  Assist the customer with the development of system level specifications.\n3. Ability to decompose and flow down aircraft system level requirements to both subsystem and component suppliers through specifications and requirements documents.\n4. Lead system design through a phase gate approval process including formal gate reviews to senior leadership and customers.\n5. Ability to define, coordinate and review system model / simulation results with analysts and identify system risks and hydraulic performance effects such as dynamic performance transients, pressure drop and thermal performance.\n6. Thorough understanding of hydraulic component performance, such as impulse and endurance requirements including industry standards (such as DO-160 and SAE-AS-5440) and ability to derive component requirements from the vehicle duty cycle.\n7. Prepare or approve system documents, e.g. analysis reports, Qualification and Certification reports etc.\n8. Participate in the development of test and certification documents for a given program.\n9. Coordinate activities with Program Management, including planning, organizing, budgeting, labor estimating, program timing.\n10. Establish technical work breakdown structures in coordination with Program Management.\n11. Participate in the risk management process by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other systems partners.\n12. Prepare technical presentations and lead meetings with the customer and other systems partners, distributing the results to the development team and coordinating actions as necessary.\n13. Lead teams engaged in the above activities.\n\nPreferred Qualifications:\n- Master\u2019s degree preferred\n\nPosition Criteria:\n- Excellent verbal and written communication skills are required for interfacing with customers, suppliers, and team members.\n- The selected applicant should be a fast-thinking problem solver and should thrive in a dynamic environment.\n- Experience with tools used for requirements flow-down / traceability (e.g. DOORS, etc.) required.\n- Good written, oral and presentation skills, leadership qualities and the ability to work well with customers and peers.\n- Program Management skills, customer interface experience, and successful new product introduction experience preferred.\n- Proven track record in executing complex, multi-year product development programs.\n- Lean and design for six sigma experience preferred.\n- Experience with geographically distributed teams and use of contracted resources preferred.\n- Demonstrated leadership skills, experienced with design processes, demonstrated results in managing programs within budgets and on time.\n- Ability to train, mentor and develop engineers.\nBasic Qualifications (Including Educational Requirements) - Bachelor of Science Degree in Engineering from an accredited institution\n- Minimum 10 years experience working with hydraulic systems or subsystems.\n- Must be able to work in the U.S. on an on-going basis without sponsorship\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 10+ Years\nTravel Required Up to 50 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-02-06 18:21:29", "url": "http://find.eaton.jobs/xml/26330435/job", "country": "United States", "company": "Eaton Corporation", "title": "Senior Hydraulic Systems Engineer", "reqid": "48643BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 26330435}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Systems Engineer\nAutoReqId 48876BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Corporation, Aerospace Hydraulic Systems Division has an opening for a Systems Engineer. This position requires knowledge and experience of system engineering including design and integration of complex systems for aircraft applications. Skills involve recognizing customer performance needs along with meeting certification requirements for various global commercial and military aerospace applications. This position will perform conceptual design, architecture, and development of systems and their integration for various commercial and military applications. Successful candidates will be able to independently lead an engineering team for a major project from initial conception through each of the design and development phases, up to and including aircraft flight certification. Primary base at any of the following locations: Fort Worth, Los Angeles, Jackson MS, Bedhampton UK with extended field assignments as noted.\n\nEssential Functions:\n1. Ability to understand aircraft system level specifications, aircraft system layouts, interfaces with other aircraft systems.  Assist the customer with the development of system level specifications.\n2. Determine and develop systems architecture using customer data and/or own analyses.\n3. Develop or use existing tools for system analyses and modeling. Define and coordinate system level analyses with other Eaton Teams.\n4. Ability to decompose and flow down aircraft system level requirements to both subsystem and component suppliers through specifications and requirements documents.\n5. Lead system design through a phase gate approval process including formal gate reviews to senior leadership and customers.\n6. Ability to derive component requirements from the vehicle duty cycle.\n7. Prepare or approve system documents, e.g. analysis reports, Qualification and Certification reports etc.\n8. Participate in the development of test and certification documents for a given program.\n9. Coordinate activities with Program Management, including planning, organizing, budgeting, labor estimating, program timing.\n10. Establish technical work breakdown structures in coordination with Program Management.\n11. Participate in the risk management process by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other systems partners.\n12. Prepare technical presentations and lead meetings with the customer and other systems partners, distributing the results to the development team and coordinating actions as necessary.\n\nDimensions:\nPerformance to On Time Delivery to Customer requests.\nManagement of open program requirements.\nAdhere to company standard design and execution practices.\nPerformance to design-to-cost, weight, and performance metrics as compared to program estimate.\n\nPreferred Qualifications:\n\u2022 Master\u2019s degree preferred\n\nPosition Criteria:\n\u2022 Excellent verbal and written communication skills are required for interfacing with customers, suppliers, and team members\n\u2022 Experience MATLAB/Simulink and with tools used for requirements flow-down / traceability (e.g. DOORS, etc.) required.\n\u2022 Good written, oral and presentation skills, leadership qualities and the ability to work well with customers and peers.\n\u2022 Program Management skills, customer interface experience, and successful new product introduction experience\n\u2022 Proven track record in executing complex, multi-year product development programs.\n\u2022 Lean and design for six sigma experience preferred.\n\u2022 Demonstrated leadership skills, experienced with design processes, demonstrated results in managing programs within budgets and on time.\n\nAdditional Information:\nWork assignments may be varied and challenging and involve complete responsibility of the design and qualification of a hydraulic system, as well as oversight into the responsibilities of less senior engineers. It is expected that this engineer would not need any day-to-day guidance when dealing with technical issues, and they must be self-directed as regards to the ownership and management of their tasks and schedules. Originality and ingenuity are required.\nBasic Qualifications (Including Educational Requirements) \u2022 Bachelor of Science Degree in Engineering from an accredited university.\n\u2022 Minimum 7 years experience working with hydraulic systems or subsystems\n\u2022 This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 7 Years\nTravel Required Up to 50 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-02-06 18:20:44", "url": "http://find.eaton.jobs/xml/26330414/job", "country": "United States", "company": "Eaton Corporation", "title": "Systems Engineer", "reqid": "48876BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 26330414}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Project Engineer\nAutoReqId 48961BR\nBusiness Function Engineering\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Sr. Project Engineer. This position will lead an engineering team performing conceptual design, development and qualification of hydraulic valves, actuators and reservoirs for various commercial and military applications, including nose wheel steering, landing gear control, general aircraft hydraulic systems. Successful candidates will be able to independently lead a major project from initial design conception through the design phases, up to and including qualification and transition to production. The position requires the use of six sigma tools to ensure project success and may involve use of some earned value tools.\n\nDuties and Responsbilities:\n\n1. Lead teams engaged in any or all of the activities below. Provide mentorship, technical advice, and oversight to component design engineers locally and at other Eaton or vendor sites, locally and globally.\n2. Estimate labor/material budgets for new and scope change proposals. Establish design-to-cost (DTC) models and track configurations to DTC compliance per company practices.\n3. Establish technical work breakdown structures and budget estimates in conjunction with Program Management and Engineering Resource Managers. Manage progress to engineering task plans and schedules through the project, including variance analysis of earned value metrics as appropriate.\n4. Develop appropriate allocations, and design margin strategy, of system requirements to component attributes including derived characteristics. Assist in review and refinement of system or component specifications. Develop and maintain specification compliance data throughout the product development life cycle.\n5. Lead component development by identifying potential weak points, and develop solutions based on engineering judgment, inputs from Eaton experts, customer, suppliers and other engineers. Apply engineering knowledge and 3D modeling skills to develop designs compliant with internal and external standard practices.\n6. Develop, execute, and manage a risk management plan including risk mitigation tasks. Solve technical problems with products and designs; drive teams to efficiently and effectively execute problem solving assignments.\n7. Lead the team in utilizing six sigma tools (especially design for six sigma) to ensure that critical to quality measures are defined and tracked through the design and validation process. Conduct reviews to ensure that design variability and process capability are understood and defined in design documentation.\n8. Prepare technical presentations for internal and external customers, including preliminary/critical design reviews and other reviews as required.\n9. Participate in and lead meetings with the customer and other engineers, distributing the results to the development team and coordinating actions as necessary. Ensure information flow within the local Eaton team, with other Eaton sites (locally and globally), and contractor teams as appropriate to facilitate work flow, efficiency and quality of work results delivered to the customer\n10. Prepare or approve SDRL documents, including analysis reports, certification reports etc.\n11. Participate in the component/system qualification process in conjunction with the Eaton and outside test laboratories.\n12. Perform other duties as assigned.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n- Bachelor of Science Degree in Engineering from an accredited institution is required.\n- Minimum 7 years of mechanical engineering experience in an Aerospace, Automotive, or Medical Device environment.\n- This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\nPosition Criteria:\n\nAbility to understand system and customer specifications, layouts and functions, and the interfaces to other platform systems.\n\nFamiliarity with manufacturing and ability to work closely with manufacturing engineers to make use of process capability data in design.\n\nGood written, oral and presentation skills, leadership qualities and the ability to work well with customers and development team members.\n\nPreferred Criteria:\n\n- Minimum 5 years experience with aircraft component development (experience with valves, landing gear, and hydraulic components highly desired) and 3-5 years experience with project management and work in a cross-functional product team (leadership experience in this environment desired).\n\n- Experience with CATIA/ProE, Matlab/Simulink, and stress analysis tools preferred.\n\n- Experience with tools used for requirements flow-down / traceability (e.g. DOORS) preferred.\n\n- Experience with earned values tools preferred\n\n- Experience with six sigma tools ( e.g. DFMEA, QFD, Crystal Ball simulation, etc.) preferred\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 7 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2012-02-01 21:23:59", "url": "http://find.eaton.jobs/xml/26251159/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Project Engineer", "reqid": "48961BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 26251159}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle CNC Machinist\nAutoReqId 48583BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace located in Los Angeles, CA (near Glendale metro) has an opening for a CNC Machinist (2nd shift)\n\nDuties and Responsibilities:\n\n\nSet-up and operate a Cincinnati 300 tool CNC horizontal milling center with a Acramatic A2100 control, or a horizontal Mori-Seiki NH-631 with 330 tools and a Fanuc 18-I control.\n\nAdjust machine, tools and edit programs to achieve blueprint and/or route sheet requirements.\n\nWorks with Department Leads, Supervisors, Manufacturing Engineers and Engineering as necessary to achieve required results.\n\nInterprets specifications and blueprints, holding close tolerances, and inspection.\nOptimizes production by performing secondary work such as running multiple machines, deburring, vibratory, and any hand work as well as preparing for the next job, organizing and cleaning the cell, performs preventive maintenance and?helping others while machines are running.\n\nVerifies that all B/P, sketch or verbal instructions requirements are met using appropriate inspection equipment 100% of the time.\n\nCompletes time cards, travelers, process sheets, program edit sheets, tool list modifications, fixture and tool offsets, SPC data, Certification program and other necessary documentation.\n\nTrains other employees on how to perform various work duties to company requirements as deemed necessary by the department supervisor.\n\nCommunicate necessary process status to following shift, ME, Lead person and/or engineering.\n\nMaintains a clean and safe work area.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School Diploma required.\nMinimum 7 years experience in setting up and running CNC machines, multi pallet system.\n\n\n\nPosition Criteria:\n\n\nAbility to read and understand blueprints, GD&T, process plans, sketches, and work from verbal instructions.\n\nKnowledge of shop mathematics, machine tools, production methods and shop practices.\n\nAbility to effectively use inspection equipment necessary to verify and accept all machined dimensions.\n\n\n\n\nPreferred Qualifications:\n\nAerospace experience preferred.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 7 Years\nTravel Required No Travel\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2012-01-23 19:03:45", "url": "http://find.eaton.jobs/xml/26045245/job", "country": "United States", "company": "Eaton Corporation", "title": "CNC Machinist", "reqid": "48583BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 26045245}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Quality Engineer\nAutoReqId 48119BR\nBusiness Function Quality\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Sr. Quality Engineer. Responsible for performing Quality Engineering duties related to support of hydraulic products fabrication, assembly, and test.\n\nDuties and Responsibilities:\n\nAssessing and developing internal capabilities in compliance with management, customer and agency goals and objectives.\nDeveloping and improving system and process performance feedback using trend, Pareto and other quality tools.\nLeading cross-functional teams in solving chronic system problems or product nonconformances.\nProviding a customer interface with respect to quality issues.\nControlling nonconforming material in accordance with Eaton procedures.\nFlowing down of external/internal quality requirements to all functions.\nPerforming verification and validation of new designs using compliance matrices, 1st articles, capability studies, DFMEA and PFMEA to ensure compliance to customer requirements and producibility standards.\nProviding technical direction to Internal Auditors to verify compliance Eaton requirements.\nDeveloping advanced quality planning with respect to Eaton and customer requirements. Ensuring compliance with quality requirements in product development gate review meetings.\nSupporting and leading continuous improvement initiatives.\nSupporting the development of test fixtures, inspection fixtures, and determination of gaging needs.\nSupporting internal audit requirements in accordance with Eaton procedures.\nDeveloping and maintaining quality work instructions and procedures.\nAchieving objectives as detailed by Quality Management.\n\nPreferred Qualifications:\n\nPreferred experience in Aerospace electromechanical or hydraulic systems required.\n\nExperience with FRACAS and reliability reporting is a plus.\nExperience in contract review, Quality Planning, failure analysis and corrective action.\nFamiliar with major Aerospace primes Quality System, as well as working knowledge of AS9100. Working knowledge of Six Sigma tools.\nCQE preferred\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nMinimum of 5 years Quality Engineering experience working with quality systems.\n\nBachelors Degree in Engineering, Technical or Business.\n\nThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen,Green Card Holder,U.S. Permanent Resident, Political Asylee, or Refugee).\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes (US/PR Only)\n\n    \n\nIndex Monitor", "date_new": "2012-01-10 21:32:17", "url": "http://find.eaton.jobs/xml/25812593/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Quality Engineer", "reqid": "48119BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 25812593}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Quality Inspector-Complex Inspections\nAutoReqId 48076BR\nBusiness Function Production\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA (near Glendale metro) has an opening for a Quality Inspector. This position reports to the Quality Inspection Lead or designated authority. Responsible internally for performing dimensional inspections on hydraulic, pneumatic, electric and mechanical component parts, assemblies and sub assemblies as required. The Quality Inspector is responsible for witnessing or performing the Source Inspection (same as above) at our suppliers, when required.\nSupport Supplier Quality Engineering as required.\n\nDUTIES AND RESPONSIBILITIES:\n\n\u2022 Perform dimensional inspection on complex machined components and tooling.\n\n\u2022 Operate Coordinate Measuring Machines during the performance of inspections (or have a strong working knowledge of CMM capability).\n\n\u2022 Work from surface plates using complex inspection layout equipment.\n\n\u2022 Perform both in-process and final first article inspections per AS9102\n\n\u2022 Be responsible for review and acceptance of paperwork and documentation used in the acceptance of product.\n\n\u2022 Initiate discrepancy reports when product is found nonconforming.\n\n\nSupplier activity\n\n\u2022 Witness and/ or Perform dimensional inspection on complex machined components and tooling at suppliers (Source Inspection), as required.\n\u2022 Sign-off product as acceptable or alert of discrepancies at Eaton suppliers.\n\u2022 Conduct investigation audits relating to corrective actions, investigations as directed by Supplier Quality Engineering (SQE).\n\u2022 Act as a liaison for SQE to communicate and investigate supplier issues.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nHigh School diploma required.\n\nMinimum of five years experience in First Article Inspection per AS9102 of highly complex, close tolerance aerospace products.\n\nMust have a valid CA drivers license.\n\nThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\nAt this time, relocation assistance is not available for this position. Only candidates in the immediate geographic area (50 mile radius) will be considered.\n\n\nPosition Criteria:\n\nBackground in surface plate layout and use of inspection equipments associated with product inspection.\n\nPossess a good understanding of Standards, Drawing Interpretation and Geometric Dimensioning and Tolerancing per ANSI Y14.5\n\n\nPreferred Criteria:\n\nASQC Inspection Certification a plus.\n\nKnowledge of Military Specifications associated with the acceptance of materials or special processing (NADCAP).\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? No\n\n    \n\nIndex Monitor", "date_new": "2011-12-15 19:18:40", "url": "http://find.eaton.jobs/xml/25384766/job", "country": "United States", "company": "Eaton Corporation", "title": "Quality Inspector-Complex Inspections", "reqid": "48076BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 25384766}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Program Manager\nAutoReqId 48013BR\nBusiness Function Program Management\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA near Glendale metro has an opening for a Program Manager level Responsible for the successful execution of the NPD Program(s) and projects and there budget allocation. Lead the Integrated Product Team(s) to drive customer satisfaction, continuous improvement and life of the program financial performance by managing customer programs, contracts, and business relationships.\n\nDuties and Responsibilities:\n\nManages the Profit and Loss of the NPD Program(s) and projects. Responsibility, Authority and Accountability (RAA) for every project scope delivery and successful execution within technical, schedule, cost and quality commitments.\nExecute IPT leadership across the Program. Seeks team input to promote rapid resolution to issues. Coaches and provides feedback/rewards on performance indicators.\nSupervises the Project Managers assigned to the Program. Establishes objectives and goals and provides direction to the program and project teams in areas of customer concerns, potential changes in scope and risk assessment. Facilitates the implementation of program management processes at the site, business unit or Division.\nManage effective customer communications. Improve organization responsiveness to customer requirements. Communication and manage customer expectations and contractual commitments internal to the business.\nEnsure standard program management processes are utilized and adequate support to the program and project teams by coordinating PM reviews, preparing & publishing PM metrics and reports.\nMaintain metrics for program for earned value (CPI/SPI), quality, technical performance and delivery through all of the PROLaunch phases.\nCoordinates all risks and requirements of the program into a complete integrated entity. This is accomplished by planning, controlling, integrating all projects into the programs and measuring all elements to ensure the requirements and goals are successfully achieved.\nManage customer contract, pricing, terms and conditions and contractual flow-down through the organization. Establish and negotiate pricing strategies by system and/or product, market and by customer. Develop contract negotiation strategies. Ensure effective change management process is utilized.\nProvides periodic program updates (Program Status Report \u2013 Green/Yellow/Red) of current situation relating to contractual milestones and problem/high risk areas (e.g., technical, cost, and schedule). Provides updates to the business units as well as divisional, and group levels.\nPlays a key role in developing New business proposals and executing the overall program plan.\nProvides overall Program interface with the customer.\nCoordinates and monitors a One Eaton Aerospace program technical personnel across multiple sites.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n\nBachelors Degree in Business Administration or Engineering is required.\n\nMinimum 5 years of Program Management experience with a minimum of 2 years of that experience in an aerospace environment.\n\nThis position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\nPreferred Qualifications:\n\nPMI (Program Management Professional) certification is highly desirable\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2011-12-13 22:14:12", "url": "http://find.eaton.jobs/xml/25336003/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Program Manager", "reqid": "48013BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 25336003}, {"country_short": "USA", "city": "Los Angeles", "description": "External Job\nTitle Sr. Manufacturing Engineer - IPT\nAutoReqId 45987BR\nBusiness Function Manufacturing\nDivision Hydraulics Systems Division\nJob Description Eaton Aerospace Group located in Los Angeles, CA has an opening for a Sr. IPT Manufacturing Engineer (Hydraulics/assembly). Primary responsibility to work with the Integrated Product Team (IPT) on new hydraulic, pneumatic, and electro-mechanical aerospace products and related components with relatively little guidance, support design reviews, provide technical support, analysis, guidance of design, design to cost, producibility of design, bill of materials, tooling, process planning, manufacturing, customer, contract support, and procurement. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in either mathematical or diagram form and also deal with several abstract and concrete variables.\n\nJob Duties and Responsibilities:\n\n1. Apply technical skills for performance resolution on new hydraulic, pneumatic, and electro-mechanical aerospace products and related components with relatively little guidance: a. Design to cost (DTC), b. Standardization of similar products, c. Robustness, manufacturability and quality improvement of design.\n2. Review and approve new engineering designs using the DFM methodology, which include review of standardization, capability (DFSS), capacity, producibility, ATP\u2019s, cost analysis, lead time, capital, material and spec obsolescence, recommendation of alternate components, and engineering BOM management.\n3. Compliance with ISO requirements.\n4. Serve as a technical contact with internal and external customers; manufacturing, engineering, quality assurance, product support, procurement and suppliers.\n5. Implement performance, cost, quality and consistency improvements in products, tooling and process during and after their design phase.\n6. Analyze data from returned components and implement improvements to increase the reliability of the components, minimizing the number of returned units.\n7. Analyze data from components to implement improvements to increase the reliability of the components, minimizing the assembly and test cycle time.\n8. Be prepared to work some extended hours, when necessary, to complete a task.\n9. Be able to work in a team environment and demonstrate support of Eaton lean principles; teamwork, cooperation, respect, and integrity.\n10. Prepare and track project budgets and schedules.\n11. Prepare manufacturing/production plan for new designs, as well as existing design for which total lead-time exceeds Producibility standards.\n12. Accomplishment of project objectives and completion of assigned tasks on schedule and within budget.\n13. Have technical expertise on hydraulics component for assembly and testing.\n14. Collaborate with peers and supervisor to determine key goals and objectives, and corresponding metrics, to be completed during a determined period (usually one year). Review and amend these actions as appropriate. Focus on timely achievement of these goals and objectives.\n15. Be able to troubleshoot assemblies that fail functional test, identify root cause and drive corrective action to ensure problem is contained.\n16. Proficient with CAD, PFMEA, DFSS, Lean, Cellular, VSM, and JIT concepts, and able to implement them to increase productivity and remove waste.\n\nIf interested, please apply online at www.eatonjobs.com indicating salary requirements/history. No phone calls or 3rd party vendors please.\nBasic Qualifications (Including Educational Requirements) Basic Qualifications:\n-Bachelor's degree in Engineering from an accredited institution is required.\n-Minimum 5 years of engineering experience is required.\n- Minimum 2 years of manufacturing engineering experience.\n-This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee).\n\n\nPosition Criteria:\n\n- Good technical writing and presentation skills.\n- Good verbal and communication skills.\n- Proficiency with computer based methods and tools.\n- Ability to logically solve problems and to keep projects moving in an orderly and structured fashion.\n- Ability to work well with others in the areas of teamwork and communication.\n\n\n\nPreferred Qualifications:\n\n- Experience with hydraulic assembly and test in Aerospace\n- Experience working in a cross-functional team\n- Experience as a Manufacturing Engineer of hydraulic assemblies.\n- Familiarity/experience with continuous improvement and Six Sigma methodology.\n- Familiarity with SPC principles and methods.\n- Involvement in successful process definition and re-engineering, a plus.\n- Experience in employee involvement in multi-discipline teaming, a plus.\n- Working knowledge of ISO-9001.\n- Familiarity in component engineering, hydraulic testing, CAD, assembly and tool design.\n- Experience in Lean Manufacturing, Kaizen events, and continuous improvement techniques.\nRegion North America - US/Puerto Rico\nCountry United States\nState California\nCity Los Angeles\nEmployee category Regular\nExperience\nLevel Minimum 5 Years\nTravel Required Up to 10 percent\nRelocation benefit provided? Yes-From within hiring country/region only\n\n    \n\nIndex Monitor", "date_new": "2011-09-16 18:34:27", "url": "http://find.eaton.jobs/xml/23665293/job", "country": "United States", "company": "Eaton Corporation", "title": "Sr. Manufacturing Engineer - IPT", "reqid": "45987BR", "state": "California", "state_short": "CA", "location": "Los Angeles, CA", "uid": 23665293}]